Mining Incidents

Ned Finney Quarry: 112 MSHA citations Metal/Non-Metal

Jobe Materials LP · Surface
Controlled by Jobeco Materials LLC
El Paso, El Paso County, TX  ·  Active
MSHA Mine ID: 4104568

Ned Finney Quarry has $34K in proposed MSHA penalties and $3K outstanding across 6 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at Ned Finney Quarry.

Fatalities
0
Total incidents
13
Years on record
2008–2026
Latest incident
Jul 2026
Compliance record
MSHA citations since 2007
112
citations
37
significant & substantial
$33,729
proposed penalties
$27,567
paid to date
82% of proposed penalties paid to date, a $6,162 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2006
65
inspections on record
1,243
inspection hours
9.0
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
112 citations across 1,243 inspection hours.
Source: MSHA inspections data, updated weekly.
Imminent-danger orders
A Section 107(a) order removes miners from an area when an inspector finds an imminent danger. Each order is lifted once the condition is corrected, so this counts orders issued, not orders now in effect.
1
Section 107(a) orders
Most recent order: 2025-12-09.
On record since 2025.
Source: MSHA imminent-danger order records, updated weekly.

Ned Finney Quarry has $34K in proposed MSHA penalties and $3K outstanding across 6 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$34K
proposed penalties
$31K
current assessed
$28K
paid to date
$3K
outstanding
101 assessments are final orders; 6 contested dockets.
Of $4K in penalties contested before the Commission, $809 was upheld in final decisions.
As of the most recent assessment on 2026-06-10.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
33.3%
significant & substantial
9.0%
high negligence or reckless
33.3%
reasonably likely or greater
54.1%
permanently disabling or fatal if injury occurs
Negligence coding: 0.9% none, 7.2% low, 82.9% moderate, 9.0% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
When citations were contested
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
10 citations taken to the federal commission · 9% of citations on record
  • Settled 6 · 60%
  • Vacated or withdrawn 1 · 10%
  • Still open 3 · 30%
80%
S&S designation survived the contest
Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.
of 5 decided S&S contests · industry: 79%
80%
Penalty reduction in decided contests
$4K proposed, $809 after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2026-02-05.
Contested penalties
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this mine contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
Docket Decision Judge Year Proposed / upheld
CENT 2011-966M Settlement Lesnick 2011 $3K → $200
CENT 2010-1291M Settlement Lesnick 2011 $667 → $254
CENT 2022-0142 Settlement Miller 2022 $252 → $148
CENT 2013-28M Withdrawal Lesnick 2013 $243 → $0
CENT 2010-319M Settlement Lesnick 2011 $207 → $207
CENT 2026-0080 Decision pending
Source: FMSHRC civil penalty dockets and decisions (public record), updated weekly.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2026-06-10
13%
of limit-tested samples over the exposure limit
38
samples
15
limit-tested
Most sampled contaminants
  • Quartz, respirable, >1% Qtz152 over
  • Respirable dust, <.1mg19
  • Nuisance dust, respirable, <1% Qtz4
Show the individual readings (38)
Date Contaminant Concentration Limit Conc / limit Occupation
2025-06-17 Quartz, respirable, >1% Qtz 2.8 2.78 1.01 Bobcat Operator
2022-01-13 Quartz, respirable, >1% Qtz 5.64 3.33 1.69 Cleanup Man
2026-06-10 Quartz, respirable, >1% Qtz 0.36 1.49 0.24 Laborer, Bullgang
2026-06-10 Quartz, respirable, >1% Qtz 0.42 Laborer, Bullgang
2025-04-30 Quartz, respirable, >1% Qtz 1.11 2.56 0.43 Bobcat Operator
2025-04-30 Respirable dust, <.1mg 0 Front-end Loader Operator
2025-04-30 Quartz, respirable, >1% Qtz 0.15 Laborer, Bullgang
2022-12-14 Quartz, respirable, >1% Qtz 0.32 Bobcat Operator
2022-12-14 Respirable dust, <.1mg 0 Front-end Loader Operator
2022-12-14 Quartz, respirable, >1% Qtz 0.4 Laborer, Bullgang
2022-05-24 Quartz, respirable, >1% Qtz 0.56 1.21 0.46 Cleanup Man
2022-01-13 Respirable dust, <.1mg 0 Front-end Loader Operator
2022-01-13 Nuisance dust, respirable, <1% Qtz 0.25 10 0.03 Crusher Oper/Worker
2022-01-13 Nuisance dust, respirable, <1% Qtz 0.19 10 0.02 Crusher Oper/Worker
2022-01-13 Respirable dust, <.1mg 0 Backhoe Operator
2016-05-17 Nuisance dust, respirable, <1% Qtz 0.12 10 0.01 Crusher Oper/Worker
2016-05-17 Quartz, respirable, >1% Qtz 0.23 1.63 0.14 Crusher Oper/Worker
2016-05-17 Respirable dust, <.1mg 0 Front-end Loader Operator
2012-09-19 Respirable dust, <.1mg 0 Drill Operator, Rotary
2012-07-17 Respirable dust, <.1mg 0 Cleanup Man
2012-07-17 Respirable dust, <.1mg 0 Truck Driver
2012-07-17 Respirable dust, <.1mg 0 Truck Driver
2012-07-17 Respirable dust, <.1mg 0 Front-end Loader Operator
2011-01-04 Nuisance dust, respirable, <1% Qtz 0.15 10 0.02 Truck Driver
2011-01-04 Respirable dust, <.1mg 0 Drill Operator, Rotary
2011-01-04 Respirable dust, <.1mg 0 Front-end Loader Operator
2009-04-08 Respirable dust, <.1mg 0 Front-end Loader Operator
2009-04-08 Respirable dust, <.1mg 0 Truck Driver
2009-04-08 Respirable dust, <.1mg 0 Truck Driver
2009-04-08 Quartz, respirable, >1% Qtz 0.38 0.86 0.44 Bobcat Operator
2008-09-16 Quartz, respirable, >1% Qtz 0.12 0.7 0.17 Bobcat Operator
2008-09-16 Respirable dust, <.1mg 0 Truck Driver
2008-09-16 Respirable dust, <.1mg 0 Front-end Loader Operator
2008-04-30 Quartz, respirable, >1% Qtz 0.3 0.66 0.45 Crusher Oper/Worker
2008-04-30 Respirable dust, <.1mg 0 Backhoe Operator
2008-04-30 Quartz, respirable, >1% Qtz 0.53 0.73 0.73 Front-end Loader Operator
2007-10-31 Quartz, respirable, >1% Qtz 0.56 0.9 0.62 Front-end Loader Operator
2007-10-31 Respirable dust, <.1mg 0 Jackhammer Operator
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.

Ned Finney Quarry recorded 6.12 reportable injury cases per 100 full-time workers in 2025.

Injury rate, 2025
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
6.12
total case rate
4.08
days-away rate
0.000
fatality rate
Above average. The US metal and nonmetal mining average was 1.65 and the all-US-mining average was 1.97 cases per 100 workers.
In Texas, metal and nonmetal mining averaged 1.17 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2025 * 6.12 4.08 0.000
2024 0.00 0.00 0.000
2023 * 0.00 0.00 0.000
2022 * 3.64 0.00 0.000
2021 * 0.00 0.00 0.000
2020 * 0.00 0.00 0.000
2019 * 0.00 0.00 0.000
2018 * 0.00 0.00 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
  1. Jobe Materials LP 2005 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year Employees
2026 50
2025 39
2024 38
2023 28
2022 21
2021 20
2020 21
2019 20
2018 19
2017 18
2016 19
2015 20
2014 20
2013 21
2012 22
2011 23
2010 26
2009 27
2008 20
2007 20
2006 18
2005 4
Source: MSHA quarterly employment and production, updated weekly.

Ned Finney Quarry sits in El Paso County, Texas, where the Census mining category is 0.8% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
El Paso County, Texas · Population 866,275
0.8%
Mining share of county employment
$58,859
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2026 Q2 34,649 5 0 144.3
2026 Q1 30,135 0 0 0.0
2025 Q4 27,225 21 7 771.3
2025 Q3 23,002 0 0 0.0
2025 Q2 24,201 3 0 124.0
2025 Q1 23,545 0 0 0.0
2024 Q4 26,714 2 0 74.9
2024 Q3 27,260 2 2 73.4
Show 75 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2024 Q2 27,767 0 0 0.0
2024 Q1 21,468 0 0 0.0
2023 Q4 17,735 4 1 225.5
2023 Q3 18,198 1 0 55.0
2023 Q2 17,001 0 0 0.0
2023 Q1 18,073 0 0 0.0
2022 Q4 16,061 4 1 249.1
2022 Q3 14,406 1 0 69.4
2022 Q2 13,624 0 0 0.0
2022 Q1 10,787 2 1 185.4
2021 Q4 11,666 0 0 0.0
2021 Q3 10,468 0 0 0.0
2021 Q2 12,800 3 0 234.4
2021 Q1 12,899 0 0 0.0
2020 Q4 12,629 2 0 158.4
2020 Q3 14,187 0 0 0.0
2020 Q2 12,820 2 0 156.0
2020 Q1 12,724 0 0 0.0
2019 Q4 12,087 0 0 0.0
2019 Q3 10,610 0 0 0.0
2019 Q2 10,374 2 0 192.8
2019 Q1 10,755 0 0 0.0
2018 Q4 10,705 1 0 93.4
2018 Q3 10,985 2 0 182.1
2018 Q2 10,427 0 0 0.0
2018 Q1 10,379 2 0 192.7
2017 Q4 11,047 0 0 0.0
2017 Q3 10,937 0 0 0.0
2017 Q2 10,756 5 2 464.9
2017 Q1 9,283 0 0 0.0
2016 Q4 10,913 3 2 274.9
2016 Q3 11,184 0 0 0.0
2016 Q2 10,730 1 0 93.2
2016 Q1 8,655 2 0 231.1
2015 Q4 10,923 0 0 0.0
2015 Q3 11,084 0 0 0.0
2015 Q2 9,666 2 0 206.9
2015 Q1 9,314 0 0 0.0
2014 Q4 9,997 2 1 200.1
2014 Q3 9,250 0 0 0.0
2014 Q2 10,930 2 0 183.0
2014 Q1 11,075 1 0 90.3
2013 Q4 12,412 0 0 0.0
2013 Q3 11,720 0 0 0.0
2013 Q2 13,024 2 2 153.6
2013 Q1 13,739 2 0 145.6
2012 Q4 14,563 0 0 0.0
2012 Q3 14,923 3 1 201.0
2012 Q2 13,842 0 0 0.0
2012 Q1 11,763 2 1 170.0
2011 Q4 11,673 0 0 0.0
2011 Q3 13,389 0 0 0.0
2011 Q2 12,674 5 3 394.5
2011 Q1 10,894 3 2 275.4
2010 Q4 12,702 0 0 0.0
2010 Q3 14,163 0 0 0.0
2010 Q2 15,583 4 4 256.7
2010 Q1 13,253 0 0 0.0
2009 Q4 15,792 2 2 126.6
2009 Q3 16,127 0 0 0.0
2009 Q2 18,102 1 0 55.2
2009 Q1 14,704 0 0 0.0
2008 Q4 14,427 3 0 207.9
2008 Q3 13,877 0 0 0.0
2008 Q2 13,945 0 0 0.0
2008 Q1 12,615 0 0 0.0
2007 Q4 13,734 1 0 72.8
2007 Q3 15,232 0 0 0.0
2007 Q2 14,191 0 0 0.0
2007 Q1 11,539 0 0 0.0
2006 Q4 14,674 0 0 0.0
2006 Q3 15,578 0 0 0.0
2006 Q2 14,320 0 0 0.0
2006 Q1 7,869 0 0 0.0
2005 Q4 1,563 0 0 0.0
No fatalities recorded at this mine.

Reportable incidents

13 on file

2026 · 4 incidents

July 20, 2026 TX · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman MACHINERY
Jobe Materials LP · Struck by... (Not Elsewhere Classified)

Trying to tie bolt by holding bottom with hand, hit it with impact causing it to spin and hurting finger.

July 16, 2026 TX · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDLING OF MATERIALS
Jobe Materials LP · Over-exertion in lifting objects

Hurt their shoulder while lifting a metal guard.

June 24, 2026 TX · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman ELECTRICAL
Jobe Materials LP · Contact with electrical current

Employee grabbed the frame of the conveyor belt which shocked EE's right hand.

January 27, 2026 TX · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman SLIP OR FALL OF PERSON
Jobe Materials LP · Over-exertion (Not Elsewhere Classified)

Employee slipped while grabbing tools from truck due to the muddy conditions.

2025 · 3 incidents

November 17, 2025 TX · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDLING OF MATERIALS
Jobe Materials LP · Struck against stationary object

Employee was cleaning deck when EE got up, EE hit EE's shoulder on the corner of the power screen frame.

October 31, 2025 TX · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDTOOLS (NONPOWERED)
Jobe Materials LP · Struck by flying object

Employee was doing maintenance work on a wing pulley by using a sledgehammer when a small piece of metal hit their eye.

January 27, 2025 TX · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDLING OF MATERIALS
Jobe Materials LP · Over-exertion in lifting objects

Employee was lifting a metal plate during daily maintenance.

2022 · 1 incident

April 18, 2022 TX · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
Jobe Materials LP · Struck by... (Not Elsewhere Classified)

Miner was working with a piece of metal and while EE was handling it, the metal cut into EE's right palm. Required a doctor's visit.

2011 · 2 incidents

October 28, 2011 TX · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver HANDLING OF MATERIALS
Jobe Materials LP · Over-exertion in lifting objects

He was lifting 50 lbs. sacks and loading onto back of truck. After loading about 150 sacks and tossing into truck. He felt a sharp pain on lower back going down left leg.

January 31, 2011 TX · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver SLIP OR FALL OF PERSON
Jobe Materials LP · Fall to the walkway or working surface

He was working, stepped on a rock, slipped, fell and then couldn't walk. He injured the Left Knee.

2009 · 2 incidents

November 27, 2009 TX · Metal/Non-Metal drill operator MACHINERY
Jobe Materials LP · Struck by... (Not Elsewhere Classified)

He was working with Drill Rock Machinery and the Drilling Hammer hit his foot, Fracturing his left foot.

2008 · 1 incident

July 7, 2008 TX · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator MACHINERY
Jobe Materials LP · Caught in, under or between (Not Elsewhere Classified)

While working on machinery, left middle finger was caught in between two metal pieces, cutting the tip of the finger.