No 10 Slope: 155 MSHA citations Coal
No 10 Slope has $50K in proposed MSHA penalties and $21K outstanding across 24 contested dockets, plus health sampling and the full incident record.
Watch this mine
Email me when a new MSHA incident is filed at No 10 Slope.
- Fatalities
- 0
- Total incidents
- 0
- Years on record
- —
- Latest incident
- —
Compliance record
MSHA citations since 2001
155
citations
49
significant & substantial
$50,111
proposed penalties
$2,043
paid to date
4% of proposed penalties paid to date, a $48,068 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2000
113
inspections on record
2,324
inspection hours
6.7
citations per 100 inspection hours
ⓘ
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.155 citations across 2,324 inspection hours.
Source: MSHA inspections data, updated weekly.
No 10 Slope has $50K in proposed MSHA penalties and $21K outstanding across 24 contested dockets.
Penalty disposition
ⓘ
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.$50K
proposed penalties
$23K
current assessed
$2K
paid to date
$21K
outstanding
148 assessments are final orders; 24 contested dockets.
Of $57K in penalties contested before the Commission, $26K was upheld in final decisions.
As of the most recent assessment on 2007-04-04.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
ⓘ
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.33.1%
significant & substantial
15.5%
high negligence or reckless
35.1%
reasonably likely or greater
14.2%
permanently disabling or fatal if injury occurs
Negligence coding: 2.0% none, 17.6% low, 64.9% moderate, 12.8% high, 2.7% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
When citations were contested
ⓘ
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
102
citations taken to the federal commission · 66% of citations on record
- Settled 92 · 90%
- Stood as issued 10 · 10%
82%
S&S designation survived the contest
ⓘ
Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.of 44 decided S&S contests · industry: 79%
60%
Penalty reduction in decided contests
$47K proposed, $19K after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2007-12-01.
Contested penalties
ⓘ
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.Largest penalties this mine contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
| Docket | Decision | Judge | Year | Proposed / upheld |
|---|---|---|---|---|
| PENN 2006-1 | Settlement | Zielinski | 2006 | $19K → $4K |
| PENN 2007-26 | Settlement | Zielinski | 2007 | $18K → $8K |
| PENN20030043 | Settlement | Feldman | 2003 | $8K → $6K |
| PENN 2005-248 | Settlement | Zielinski | 2007 | $2K → $1K |
| PENN 2005-246 | Settlement | Zielinski | 2006 | $2K → $750 |
| PENN20030052 | Settlement | Feldman | 2003 | $1K → $500 |
Source: FMSHRC civil penalty dockets and decisions (public record), updated weekly.
MSHA sampling at No 10 Slope shows 99% of 288 respirable coal dust samples met the 1.5 mg/m3 standard.
Health sampling
ⓘ
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.Respirable coal dust
ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.
Last sampled: 2006-11-08, 19 years ago
ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.99%
within 1.5 mg/m3
288
samples
1.86
dust max (mg/m3)
124 samples taken by MSHA inspectors, 164 by the operator.
Most-sampled occupations
- HAND LOADERS196
- LABORER36
- HOIST ENGINEER/OPERATOR27
Silica (quartz)
Last sampled: 2005-10-11, 20 years ago2.2
silica avg (%)
4
samples
3.9
silica max (%)
Most-sampled occupations
- HAND LOADERS4
Noise
ⓘ
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.
Last sampled: 2006-05-16, 20 years ago
ⓘ
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.0%
over PEL
30
samples
Most-sampled occupations
- LABORER11
- HOIST ENGINEER/OPERATOR10
- HAND LOADERS9
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.
Health sampling trend
ⓘ
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.Respirable coal dust by year
ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.| Year | within 1.5 mg/m3 | samples |
|---|---|---|
| 2006 | 100% | 37 |
| 2005 | 98% | 47 |
| 2004 | 98% | 40 |
| 2003 | 100% | 42 |
| 2002 | 100% | 42 |
| 2001 | 100% | 42 |
| 2000 | 100% | 38 |
Silica (quartz) by year
| Year | silica avg (%) | samples |
|---|---|---|
| 2005 | 1.7 | 1 |
| 2004 | 0.7 | 1 |
| 2002 | 3.9 | 1 |
| 2001 | 2.4 | 1 |
Noise by year
| Year | over PEL | samples |
|---|---|---|
| 2006 | 0% | 5 |
| 2005 | 0% | 9 |
| 2003 | 0% | 3 |
| 2002 | 0% | 5 |
| 2001 | 0% | 3 |
| 2000 | 0% | 5 |
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.
No 10 Slope recorded 0.00 reportable injury cases per 100 full-time workers in 2005.
Injury rate, 2005
ⓘ
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.0.00
total case rate
0.00
days-away rate
0.000
fatality rate
No reportable injury cases in any year shown. Employee-hours were reported in each of those years, so these are true zeros rather than missing data. Citations, listed in the compliance record above, are inspector-found violations and are counted separately from worker injuries.
Below average. The US coal mining average was 5.11 and the all-US-mining average was 4.21 cases per 100 workers.
In Pennsylvania, coal mining averaged 5.95 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
| Year | total case rate | days-away | fatal |
|---|---|---|---|
| 2005 * | 0.00 | 0.00 | 0.000 |
| 2004 * | 0.00 | 0.00 | 0.000 |
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
- Chestnut Coal 1980 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
ⓘ
Coal production is reported quarterly and lags the current period; the most recent quarters may be incomplete.| Year | Employees | Coal produced (tons) |
|---|---|---|
| 2006 | 12 | 7,621 |
| 2005 | 13 | 11,822 |
| 2004 | 14 | 15,501 |
| 2003 | 9 | 7,704 |
| 2002 | 6 | 5,881 |
| 2001 | 8 | 10,289 |
| 2000 | 6 | 5,438 |
Source: MSHA quarterly employment and production, updated weekly.
No 10 Slope sits in Northumberland County, Pennsylvania, where the Census mining category is 0.6% of county employment.
Local economic context
ⓘ
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.Northumberland County, Pennsylvania · Population 90,925
0.6%
Mining share of county employment
$57,948
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
ⓘ
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.Citations per million employee-hours, as reported to MSHA
| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2006 Q4 | 4,680 | 1 | 0 | 213.7 |
| 2006 Q3 | 252 | 4 | 0 | 15873.0 |
| 2006 Q2 | 4,620 | 6 | 0 | 1298.7 |
| 2006 Q1 | 4,620 | 46 | 13 | 9956.7 |
| 2005 Q4 | 6,370 | 4 | 0 | 627.9 |
| 2005 Q3 | 5,460 | 3 | 1 | 549.5 |
| 2005 Q2 | 5,005 | 3 | 2 | 599.4 |
| 2005 Q1 | 3,430 | 42 | 21 | 12244.9 |
Show 19 earlier quarters Hide earlier quarters
| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2004 Q4 | 7,680 | 2 | 0 | 260.4 |
| 2004 Q3 | 6,370 | 5 | 1 | 784.9 |
| 2004 Q2 | 6,240 | 1 | 0 | 160.3 |
| 2004 Q1 | 5,460 | 1 | 1 | 183.2 |
| 2003 Q4 | 3,870 | 1 | 1 | 258.4 |
| 2003 Q3 | 3,185 | 1 | 1 | 314.0 |
| 2003 Q2 | 3,024 | 1 | 0 | 330.7 |
| 2003 Q1 | 3,240 | 6 | 0 | 1851.9 |
| 2002 Q4 | 2,016 | 2 | 0 | 992.1 |
| 2002 Q3 | 1,344 | 5 | 1 | 3720.2 |
| 2002 Q2 | 972 | 14 | 6 | 14403.3 |
| 2002 Q1 | 1,320 | 0 | 0 | 0.0 |
| 2001 Q4 | 3,360 | 0 | 0 | 0.0 |
| 2001 Q3 | 2,730 | 2 | 0 | 732.6 |
| 2001 Q2 | 3,120 | 0 | 0 | 0.0 |
| 2001 Q1 | 3,120 | 2 | 0 | 641.0 |
| 2000 Q4 | 2,290 | 0 | 0 | 0.0 |
| 2000 Q2 | 1,050 | 0 | 0 | 0.0 |
| 2000 Q1 | 1,950 | 0 | 0 | 0.0 |
No reportable incidents on file.
MSHA has no recorded reportable accidents for this mine in the current dataset. New reports appear here within a week of being filed.