North Norwich Bundy Pit has $3K in proposed MSHA penalties and $0 outstanding across 0 contested dockets, plus health sampling and the full incident record.
Watch this mine
Email me when a new MSHA incident is filed at North Norwich Bundy Pit.
Fatalities
0
Total incidents
19
Years on record
1986–2014
Latest incident
Jun 2014
Compliance record
MSHA citations since 2000
35
citations
5
significant & substantial
$3,270
proposed penalties
$3,270
paid to date
100% of proposed penalties paid to date, a $0 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2000
27
inspections on record
364
inspection hours
n/a
citations per 100 inspection hours
ⓘThis rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 364 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.
North Norwich Bundy Pit has $3K in proposed MSHA penalties and $0 outstanding across 0 contested dockets.
Penalty disposition
ⓘDifferences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$3K
proposed penalties
$3K
current assessed
$3K
paid to date
$0
outstanding
34 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2018-05-03.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Quarterly safety rates
ⓘCitations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Working to change the seal on an oil leak on the screen deck. Cut a hole with torch on Seco deck. Used a come-a-long to take the counter balance off. A spark must have gone into bottom of screen deck & smoldered. Flared up at 9:30.
Vendor ee was moving tires from a loader. He was using an excavator to remove tires. EE & another ee (plant mgr) had discussed need to put blocks under loader to crib it up. Loader moved & counter weight hit him in leg/side. 911 called
2005 · 1 incident
June 16, 2005NY · Metal/Non-Metallaborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitmanMACHINERY
A ROCK FELL FROM THE DECK ABOVE DURING THE CRUSHING OPERATION AND HIT EE IN THE HARD HAT & THEN BOUNCED OFF HIS RIGHT SHOULDER. HE GRABBED FOR HIS HARD HAT, SPUN AROUND, HIT THE LEFT SIDE OF HIS HEAD ON THE STEEL I BEAM & FELL TO THE DECK.
2004 · 1 incident
January 27, 2004NY · Metal/Non-Metallaborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitmanMACHINERY
EMPLOYEE WAS ATTEMPTING TO CLEAN UP THE SHOP. HE DROPPED A [IECE OF STEEL ON THE FLOOR OF THE SHOP. IT KICKED UO A MALL FRAGMENT OF STEEL WHICH WENT INTO HIS RIGHT EYE. HE WAS WEARING SAFETY G LASSES AT THE TIME.
June 14, 1997NY · Metal/Non-Metallaborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitmanHANDTOOLS (NONPOWERED)
EMPLOYEE WAS WORKING WITH THREE OTHERS TO REMOVE THE SPEED REDUCER ON RETURN BELT #2. A PORTA POWER THAT WAS ATTACHED TO THE SPEED REDUCER SLIPPED OFF AND HIT THE EMPLOYEE'S RING FINGER KNUCKL E ON HIS LEFT HAND.
1996 · 1 incident
July 9, 1996NY · Metal/Non-Metallaborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitmanHANDLING OF MATERIALS
EMPLOYEE WAS INSPECTING THE CRUSHER WITH WAYNE VAN DUESEN. THEY HAD LIFTED A STEEL PLATE DOOR AND SET THE SAFETY LATCH SO THEY COULD LOOK INTO THE CRUSHER. THE SAFETY LATCH DIDN'T CATCH ALL THE WAY. THE DOOR FELL BACK TO THE CLOSED POSITION CATCHING DAVE'S FINGER BETWEEN THE DOOR AND THE JAM.
March 15, 1994NY · Metal/Non-Metalbulldozer operator, universal operator, heavy equipment operator, operating engineerMACHINERY
EMPLOYEE WAS UNDERNEATH THE HOPPER CLEANING OFF THE FEEDER BELT WITH PLANT SUPERVISOR EE A LARGE ROCK FELL FROM HOPPER COVER THE SIDE AS THE LOADER OPERATOR WAS LOADING THE HOPPER HE DIDNT SEE EMPLOYEE UNDER HOPPER CLEANING OFF BELT
May 4, 1993NY · Metal/Non-Metalmaintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service techMACHINERY
EMPLOYEE WAS WORKING ON BUILDING CONVEYOR SUPPORTS AS HE WAS CHIPPING SLAG OFF OF WELDS WITH A HAMMER A CHIP SUBSTANCE WENT INTO HIS LEFT EYE EMPLOYEE WAS WEARING A WELDING HELMET AT THE TIME CHIP WENT UNDER HELMET & FLEW INTO EYE
1992 · 3 incidents
November 2, 1992NY · Metal/Non-MetalsuperintendentMACHINERY
EE WAS GRINDING STEEL AND FELT SOMETHING IN HIS EYE. HE WAS WEARING SAFETY GLASSES WHILE HE WAS GINDING.
July 30, 1992NY · Metal/Non-Metalmaintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service techSLIP OR FALL OF PERSON
EMPL TRYING TO 8TRAIGHTEN PIECE OF STEEL BY HAND.HANDS SLIPPED AND HE RAN LEFT MIDDLE FINGER ACROSS SHARP EDGE CUTTING IT.
For insurers, brokers, and safety consultants
The full compliance file on North Norwich Bundy Pit
A dated report covering the 26-year penalty trail, line-item violation pattern, contest and
docket posture, rate-normalized peer benchmark, and full fatality history. Delivered as a PDF
with the underlying data as CSV.