Mining Incidents

Panther Creek Mine: 28 MSHA citations Coal

Appleton City, Bates County, MO  ·  Abandoned
MSHA Mine ID: 2302186

Panther Creek Mine has $2K in proposed MSHA penalties and $0 outstanding across 0 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at Panther Creek Mine.

Fatalities
0
Total incidents
1
Years on record
2001
Latest incident
Aug 2001
Compliance record
MSHA citations since 2000
28
citations
18
significant & substantial
$2,417
proposed penalties
$2,417
paid to date
100% of proposed penalties paid to date, a $0 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2000
34
inspections on record
598
inspection hours
n/a
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 598 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.

Panther Creek Mine has $2K in proposed MSHA penalties and $0 outstanding across 0 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$2K
proposed penalties
$2K
current assessed
$2K
paid to date
$0
outstanding
28 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2004-02-18.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
64.3%
significant & substantial
0.0%
high negligence or reckless
64.3%
reasonably likely or greater
0.0%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 7.1% low, 92.9% moderate, 0.0% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.

MSHA sampling at Panther Creek Mine shows 98% of 56 respirable coal dust samples met the 1.5 mg/m3 standard.

Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Respirable coal dust
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.

Last sampled: 2004-05-12, 22 years ago
98%
within 1.5 mg/m3
56
samples
1.54
dust max (mg/m3)
42 samples taken by MSHA inspectors, 14 by the operator.
Most-sampled occupations
  • HIGHLIFT OPERATOR/FRONT END LOADER18
  • BACKHOE OPERATOR16
  • BULLDOZER OPERATOR14

Silica (quartz)

Last sampled: 2001-04-16, 25 years ago
15.2
silica avg (%)
1
samples
15.2
silica max (%)
Most-sampled occupations
  • BULLDOZER OPERATOR1

Noise
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.

Last sampled: 2004-02-10, 22 years ago
2%
over PEL
45
samples
Most-sampled occupations
  • BULLDOZER OPERATOR16
  • HIGHLIFT OPERATOR/FRONT END LOADER10
  • COAL TRUCK DRIVER8
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.
Health sampling trend
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.
Respirable coal dust by year
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.
Year within 1.5 mg/m3 samples
2004 100% 10
2003 100% 6
2002 100% 24
2001 92% 12
2000 100% 4
Noise by year
Year over PEL samples
2004 0% 5
2003 0% 5
2002 0% 10
2001 0% 15
2000 10% 10
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.

Panther Creek Mine recorded 0.00 reportable injury cases per 100 full-time workers in 2003.

Injury rate, 2003
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
No reportable injury cases in any year shown. Employee-hours were reported in each of those years, so these are true zeros rather than missing data. Citations, listed in the compliance record above, are inspector-found violations and are counted separately from worker injuries.
Below average. The US coal mining average was 5.87 and the all-US-mining average was 4.43 cases per 100 workers.
In Missouri, coal mining averaged 0.00 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
  1. Continental Coal Inc 1999 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Coal production is reported quarterly and lags the current period; the most recent quarters may be incomplete.
Year Employees Coal produced (tons)
2004 7 141,026
2003 9 344,841
2002 7 203,050
2001 7 189,727
2000 8 187,582
Source: MSHA quarterly employment and production, updated weekly.

Panther Creek Mine sits in Bates County, Missouri, where the Census mining category is 0.4% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Bates County, Missouri · Population 16,121
0.4%
Mining share of county employment
$57,914
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2004 Q3 585 0 0 0.0
2004 Q2 5,300 0 0 0.0
2004 Q1 5,850 3 1 512.8
2003 Q4 5,382 0 0 0.0
2003 Q3 5,800 5 3 862.1
2003 Q2 4,800 0 0 0.0
2003 Q1 4,800 0 0 0.0
2002 Q4 3,942 1 0 253.7
Show 11 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2002 Q3 4,280 0 0 0.0
2002 Q2 4,095 0 0 0.0
2002 Q1 3,982 0 0 0.0
2001 Q4 4,023 1 0 248.6
2001 Q3 4,098 0 0 0.0
2001 Q2 4,157 2 0 481.1
2001 Q1 4,050 0 0 0.0
2000 Q4 4,025 0 0 0.0
2000 Q3 4,645 0 0 0.0
2000 Q2 4,302 5 3 1162.3
2000 Q1 3,300 11 11 3333.3
No fatalities recorded at this mine.

Reportable incidents

1 on file

2001 · 1 incident

August 28, 2001 MO · Coal truck driver POWERED HAULAGE
Continental Coal Inc · Struck by powered moving object

CAT 773 HAUL TRUCK BACKED INTO CAB OF OTHER 773 TRUCK DIMPLING CAB WHICH RESULTED IN A BRUISED RIGHT LOWER LEG (NO BREAK). BLOOD LOSS (ELEVATE LEG FOR 3 TO 4 DAYS THEN RETURN TO WORK).