Mining Incidents

PCP #5: 48 MSHA citations Metal/Non-Metal

Hallett Materials · Surface
Controlled by CRH PLC
Des Moines, Polk County, IA  ·  Abandoned
MSHA Mine ID: 1301050

PCP #5 has $6K in proposed MSHA penalties and $0 outstanding across 2 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at PCP #5.

Fatalities
0
Total incidents
7
Years on record
1993–2011
Latest incident
Jun 2011
Compliance record
MSHA citations since 2001
48
citations
12
significant & substantial
$6,370
proposed penalties
$6,362
paid to date
100% of proposed penalties paid to date, a $8 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2001
31
inspections on record
331
inspection hours
n/a
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 331 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.

PCP #5 has $6K in proposed MSHA penalties and $0 outstanding across 2 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$6K
proposed penalties
$6K
current assessed
$6K
paid to date
$0
outstanding
46 assessments are final orders; 2 contested dockets.
Of $222 in penalties contested before the Commission, $100 was upheld in final decisions.
As of the most recent assessment on 2016-07-18.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
25.5%
significant & substantial
8.5%
high negligence or reckless
25.5%
reasonably likely or greater
68.1%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 14.9% low, 76.6% moderate, 8.5% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
When citations were contested
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
2 citations taken to the federal commission · 4% of citations on record
  • Settled 1 · 50%
  • Vacated or withdrawn 1 · 50%
55%
Penalty reduction in decided contests
$222 proposed, $100 after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2016-09-08.
Contested penalties
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this mine contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
Docket Decision Judge Year Proposed / upheld
CENT 2016-0547 Withdrawal Miller 2016 $114 → $0
CENT 2015-0250 Settlement Miller 2015 $108 → $100
Source: FMSHRC civil penalty dockets and decisions (public record), updated weekly.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2014-11-25, 11 years ago
40%
of limit-tested samples over the exposure limit
9
samples
5
limit-tested
Most sampled contaminants
  • Quartz, respirable, >1% Qtz52 over
  • Respirable dust, <.1mg4
Show the individual readings (9)
Date Contaminant Concentration Limit Conc / limit Occupation
2005-07-14 Quartz, respirable, >1% Qtz 1.47 0.92 1.60 Crusher Oper/Worker
2002-07-09 Quartz, respirable, >1% Qtz 1.42 0.92 1.54 Crusher Oper/Worker
2014-11-25 Respirable dust, <.1mg 0 Cleanup Man
2014-11-25 Respirable dust, <.1mg 0 Front-end Loader Operator
2011-04-19 Respirable dust, <.1mg 0 Front-end Loader Operator
2011-04-19 Respirable dust, <.1mg 0 Utility Man
2005-07-14 Quartz, respirable, >1% Qtz 1.1 1.43 0.77 Front-end Loader Operator
2002-07-09 Quartz, respirable, >1% Qtz 0.15 0.64 0.23 Backhoe Operator
2002-07-09 Quartz, respirable, >1% Qtz 0.35 1 0.35 Bulldozer Operator
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.
Ownership history
  1. Rohlin Construction Company Inc 1950 to 2005
  2. Hallett Materials Inc 2005 to 2008
  3. Hallett Materials 2008 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year Employees
2017 0
2016 2
2015 4
2014 5
2013 5
2012 6
2011 5
2010 5
2009 6
2008 5
2007 6
2006 5
2005 5
2004 7
2003 5
2002 5
2001 4
2000 4
Source: MSHA quarterly employment and production, updated weekly.

PCP #5 sits in Polk County, Iowa, where the Census mining category is 0.0% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Polk County, Iowa · Population 497,441
0.0%
Mining share of county employment
$81,621
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2017 Q1 0 0 0
2016 Q4 0 0 0
2016 Q3 2,400 2 1 833.3
2016 Q2 536 0 0 0.0
2016 Q1 0 0 0
2015 Q4 1,998 0 0 0.0
2015 Q3 2,726 0 0 0.0
2015 Q2 3,258 0 0 0.0
Show 61 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2015 Q1 5 0 0 0.0
2014 Q4 2,424 2 0 825.1
2014 Q3 2,793 0 0 0.0
2014 Q2 2,578 2 0 775.8
2014 Q1 231 0 0 0.0
2013 Q4 1,775 0 0 0.0
2013 Q3 1,700 0 0 0.0
2013 Q2 2,295 0 0 0.0
2013 Q1 629 0 0 0.0
2012 Q4 1,591 0 0 0.0
2012 Q3 1,828 1 0 547.0
2012 Q2 3,387 0 0 0.0
2012 Q1 440 0 0 0.0
2011 Q4 2,913 0 0 0.0
2011 Q3 2,680 0 0 0.0
2011 Q2 2,808 0 0 0.0
2011 Q1 701 0 0 0.0
2010 Q4 2,891 0 0 0.0
2010 Q3 1,786 0 0 0.0
2010 Q2 1,486 4 2 2691.8
2010 Q1 348 0 0 0.0
2009 Q4 2,362 0 0 0.0
2009 Q3 5,382 0 0 0.0
2009 Q2 3,336 0 0 0.0
2009 Q1 352 0 0 0.0
2008 Q4 2,699 0 0 0.0
2008 Q3 1,015 0 0 0.0
2008 Q2 2,806 0 0 0.0
2008 Q1 593 0 0 0.0
2007 Q4 2,180 2 0 917.4
2007 Q3 3,569 0 0 0.0
2007 Q2 4,976 0 0 0.0
2007 Q1 1,302 0 0 0.0
2006 Q4 1,520 2 0 1315.8
2006 Q3 2,860 0 0 0.0
2006 Q2 3,599 0 0 0.0
2006 Q1 1,522 0 0 0.0
2005 Q4 2,735 2 1 731.3
2005 Q3 3,806 7 2 1839.2
2005 Q2 2,499 3 2 1200.5
2005 Q1 984 0 0 0.0
2004 Q4 2,852 0 0 0.0
2004 Q3 6,011 0 0 0.0
2004 Q2 5,037 0 0 0.0
2004 Q1 716 0 0 0.0
2003 Q4 2,375 0 0 0.0
2003 Q3 3,880 0 0 0.0
2003 Q2 3,374 5 1 1481.9
2003 Q1 636 0 0 0.0
2002 Q4 2,657 1 1 376.4
2002 Q3 4,660 1 0 214.6
2002 Q2 3,390 9 2 2654.9
2002 Q1 568 0 0 0.0
2001 Q4 2,061 0 0 0.0
2001 Q3 3,031 5 0 1649.6
2001 Q2 3,574 0 0 0.0
2001 Q1 344 0 0 0.0
2000 Q4 1,543 0 0 0.0
2000 Q3 3,513 0 0 0.0
2000 Q2 4,209 0 0 0.0
2000 Q1 628 0 0 0.0
No fatalities recorded at this mine.

Reportable incidents

7 on file

2011 · 1 incident

June 16, 2011 IA · Metal/Non-Metal ledgeman/hand, quarry man HANDLING OF MATERIALS
Hallett Materials · Over-exertion in lifting objects

They were loading cribbing blocks onto the lowboy trailer for transport; one of the blocks had fallen to the ground after it was loaded. The employee went to pick up the block and set it in the skid steer bucket to load it back onto the trailer, thats when he heard a loud pop in his right shoulder

2006 · 1 incident

December 14, 2006 IA · Metal/Non-Metal assayer, geologist, metallurgist, engineer, engineer management MACHINERY
Hallett Materials Inc · Caught in, under or between (Not Elsewhere Classified)

Drilling thru metal to install hitch, the bit caught & twisted his hand.

1999 · 1 incident

July 1, 1999 IA · Metal/Non-Metal welder (shop) MACHINERY
Rohlin Construction Company Inc · Contact with hot objects or substances

WAS CUTTING REROD OUT CONRETE WITH A TORCH AND TOUCHED HIS LEFT KNEE WITH THE TORCH BURNING HIS KNEE.

1998 · 1 incident

October 13, 1998 IA · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer HANDLING OF MATERIALS
Rohlin Construction Company Inc · Caught in, under or between (Not Elsewhere Classified)

TAKING DOWN THE CRUSHER PUT HIS FINGR INTO A HOLE TO REMOVE A ROCK AND HIS FINGER GOT SMASHED

1997 · 1 incident

November 17, 1997 IA · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer SLIP OR FALL OF PERSON
Rohlin Construction Company Inc · Over-exertion (Not Elsewhere Classified)

HELPING TEAR DOWN THE CRUSHED - LOADING BLOCK INTO LOADER BUCKET - SLIPPED ON THE ICE - TWISTED LOWER BACK.

1996 · 1 incident

July 3, 1996 IA · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer MACHINERY
Rohlin Construction Company Inc · Struck by flying object

EE WAS MOVING A CORD WHILE THE FOREMAN WAS BACKING UP AN EXCAVATOR. A PIECE OF STEEL CAME OUT OFTHE TRACK AND STUCK IN EE'S KNEE.

1993 · 1 incident

April 12, 1993 IA · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman MACHINERY
Rohlin Construction Company Inc · Struck by... (Not Elsewhere Classified)

WAS CUTTING A PIECE OF WOOD WITH A SKILL SAW & ACCIDENTLY CUT END OF HIS FINGER.