Mining Incidents

Plant 2: 75 MSHA citations Metal/Non-Metal

MCC, Inc. · Surface
Controlled by Joseph Murphy
Appleton, WI, Outagamie County, WI  ·  Active
MSHA Mine ID: 4700095

Plant 2 has $9K in proposed MSHA penalties and $0 outstanding across 1 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at Plant 2.

Fatalities
0
Total incidents
52
Years on record
1983–2008
Latest incident
Mar 2008
Compliance record
MSHA citations since 2002
75
citations
9
significant & substantial
$9,031
proposed penalties
$9,031
paid to date
100% of proposed penalties paid to date, a $0 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2000
65
inspections on record
777
inspection hours
n/a
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 777 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.

Plant 2 has $9K in proposed MSHA penalties and $0 outstanding across 1 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$9K
proposed penalties
$9K
current assessed
$9K
paid to date
$0
outstanding
75 assessments are final orders; 1 contested dockets.
Of $150 in penalties contested before the Commission, $150 was upheld in final decisions.
As of the most recent assessment on 2024-06-10.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
12.0%
significant & substantial
5.3%
high negligence or reckless
12.0%
reasonably likely or greater
45.3%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 1.3% low, 93.3% moderate, 5.3% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
When citations were contested
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
1 citations taken to the federal commission · 1% of citations on record
  • Stood as issued 1 · 100%
100%
S&S designation survived the contest
Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.
of 1 decided S&S contests · industry: 79%
0%
Penalty reduction in decided contests
$150 proposed, $150 after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2002-11-06.
Contested penalties
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this mine contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
Docket Decision Judge Year Proposed / upheld
LAKE20030033M Dismissal Barbour 2003 $150 → $150
Source: FMSHRC civil penalty dockets and decisions (public record), updated weekly.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2026-01-29
0%
of limit-tested samples over the exposure limit
17
samples
12
limit-tested
Most sampled contaminants
  • Quartz, respirable, >1% Qtz10
  • Respirable dust, <.1mg4
  • Nuisance dust, respirable, <1% Qtz3
Show the individual readings (17)
Date Contaminant Concentration Limit Conc / limit Occupation
2026-01-29 Respirable dust, <.1mg 0 Front-end Loader Operator
2026-01-29 Respirable dust, <.1mg 0 Front-end Loader Operator
2026-01-29 Quartz, respirable, >1% Qtz 0.21 Crusher Oper/Worker
2021-04-14 Nuisance dust, respirable, <1% Qtz 0.46 10 0.05 Crusher Oper/Worker
2021-04-14 Respirable dust, <.1mg 0 Front-end Loader Operator
2016-12-14 Quartz, respirable, >1% Qtz 0.33 1.78 0.19 Front-end Loader Operator
2016-12-14 Nuisance dust, respirable, <1% Qtz 0.4 10 0.04 Crusher Oper/Worker
2013-07-17 Respirable dust, <.1mg 0 Cleanup Man
2013-07-17 Quartz, respirable, >1% Qtz 0.14 1.44 0.10 Crusher Oper/Worker
2013-07-17 Nuisance dust, respirable, <1% Qtz 0.14 10 0.01 Front-end Loader Operator
2007-06-27 Quartz, respirable, >1% Qtz 0.84 1.51 0.56 Crusher Oper/Worker
2007-06-27 Quartz, respirable, >1% Qtz 0.27 0.92 0.29 Front-end Loader Operator
2007-06-27 Quartz, respirable, >1% Qtz 0.31 0.98 0.32 Front-end Loader Operator
2002-01-30 Quartz, respirable, >1% Qtz 0.63 1.45 0.43 Front-end Loader Operator
2002-01-30 Quartz, respirable, >1% Qtz 0.58 1.45 0.40 Supervisor, Co. Official
2002-01-30 Quartz, respirable, >1% Qtz 0.68 1.92 0.35 Supervisor, Co. Official
2002-01-30 Quartz, respirable, >1% Qtz 0.7 1.76 0.40 Front-end Loader Operator
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.

Plant 2 recorded 0.00 reportable injury cases per 100 full-time workers in 2025.

Injury rate, 2025
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
No reportable injury cases in any year shown. Employee-hours were reported in each of those years, so these are true zeros rather than missing data. Citations, listed in the compliance record above, are inspector-found violations and are counted separately from worker injuries.
Below average. The US metal and nonmetal mining average was 1.65 and the all-US-mining average was 1.97 cases per 100 workers.
In Wisconsin, metal and nonmetal mining averaged 1.80 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2025 * 0.00 0.00 0.000
2024 * 0.00 0.00 0.000
2023 * 0.00 0.00 0.000
2022 * 0.00 0.00 0.000
2015 * 0.00 0.00 0.000
2014 * 0.00 0.00 0.000
2013 * 0.00 0.00 0.000
2012 * 0.00 0.00 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
  1. MCC, Inc. 1950 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year Employees
2026 10
2025 12
2024 11
2023 13
2022 11
2021 7
2020 6
2019 7
2018 5
2017 7
2016 7
2015 8
2014 10
2013 12
2012 12
2011 11
2010 9
2009 8
2008 7
2007 7
2006 7
2005 7
2004 9
2003 4
2002 6
2001 4
2000 5
Source: MSHA quarterly employment and production, updated weekly.

Plant 2 sits in Outagamie County, Wisconsin, where the Census mining category is 0.1% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Outagamie County, Wisconsin · Population 191,537
0.1%
Mining share of county employment
$82,857
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2026 Q2 5,731 0 0 0.0
2026 Q1 4,807 0 0 0.0
2025 Q4 5,896 0 0 0.0
2025 Q3 5,738 0 0 0.0
2025 Q2 6,478 0 0 0.0
2025 Q1 5,799 0 0 0.0
2024 Q4 5,117 0 0 0.0
2024 Q3 5,678 0 0 0.0
Show 98 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2024 Q2 4,968 5 1 1006.4
2024 Q1 5,176 0 0 0.0
2023 Q4 6,168 1 0 162.1
2023 Q3 6,143 0 0 0.0
2023 Q2 7,035 0 0 0.0
2023 Q1 5,474 0 0 0.0
2022 Q4 5,379 0 0 0.0
2022 Q3 6,518 0 0 0.0
2022 Q2 6,019 0 0 0.0
2022 Q1 4,671 0 0 0.0
2021 Q4 4,000 0 0 0.0
2021 Q3 5,180 0 0 0.0
2021 Q2 6,070 1 0 164.7
2021 Q1 4,525 0 0 0.0
2020 Q4 4,007 0 0 0.0
2020 Q3 6,301 1 0 158.7
2020 Q2 3,614 0 0 0.0
2020 Q1 4,928 1 0 202.9
2019 Q4 5,773 0 0 0.0
2019 Q3 3,402 0 0 0.0
2019 Q2 3,890 0 0 0.0
2019 Q1 4,615 0 0 0.0
2018 Q4 4,608 1 0 217.0
2018 Q3 2,560 0 0 0.0
2018 Q2 1,896 1 0 527.4
2018 Q1 3,292 0 0 0.0
2017 Q4 5,246 4 0 762.5
2017 Q3 4,493 0 0 0.0
2017 Q2 4,624 0 0 0.0
2017 Q1 4,248 0 0 0.0
2016 Q4 4,049 1 0 247.0
2016 Q3 4,380 0 0 0.0
2016 Q2 2,755 0 0 0.0
2016 Q1 3,452 2 0 579.4
2015 Q4 6,705 0 0 0.0
2015 Q3 5,532 0 0 0.0
2015 Q2 4,804 0 0 0.0
2015 Q1 3,466 0 0 0.0
2014 Q4 5,768 0 0 0.0
2014 Q3 6,392 0 0 0.0
2014 Q2 4,579 0 0 0.0
2014 Q1 3,278 0 0 0.0
2013 Q4 5,490 1 0 182.1
2013 Q3 6,062 3 1 494.9
2013 Q2 6,434 0 0 0.0
2013 Q1 6,023 0 0 0.0
2012 Q4 5,712 0 0 0.0
2012 Q3 6,840 0 0 0.0
2012 Q2 5,931 0 0 0.0
2012 Q1 5,630 0 0 0.0
2011 Q4 5,761 2 0 347.2
2011 Q3 5,464 0 0 0.0
2011 Q2 3,763 0 0 0.0
2011 Q1 4,623 0 0 0.0
2010 Q4 5,095 6 2 1177.6
2010 Q3 4,692 0 0 0.0
2010 Q2 5,803 2 0 344.6
2010 Q1 3,337 0 0 0.0
2009 Q4 2,291 0 0 0.0
2009 Q3 2,721 0 0 0.0
2009 Q2 5,202 0 0 0.0
2009 Q1 2,450 0 0 0.0
2008 Q4 1,265 2 0 1581.0
2008 Q3 3,120 0 0 0.0
2008 Q2 3,288 0 0 0.0
2008 Q1 1,470 3 0 2040.8
2007 Q4 1,830 0 0 0.0
2007 Q3 3,120 0 0 0.0
2007 Q2 4,800 2 0 416.7
2007 Q1 1,800 0 0 0.0
2006 Q4 700 0 0 0.0
2006 Q3 5,952 0 0 0.0
2006 Q2 3,960 0 0 0.0
2006 Q1 1,600 3 0 1875.0
2005 Q4 1,280 0 0 0.0
2005 Q3 1,920 0 0 0.0
2005 Q2 5,760 1 1 173.6
2005 Q1 3,240 6 0 1851.9
2004 Q4 5,760 0 0 0.0
2004 Q3 5,280 0 0 0.0
2004 Q2 8,160 0 0 0.0
2004 Q1 2,400 3 0 1250.0
2003 Q4 3,432 0 0 0.0
2003 Q3 1,440 0 0 0.0
2003 Q2 1,500 0 0 0.0
2003 Q1 2,040 4 0 1960.8
2002 Q4 6,120 0 0 0.0
2002 Q3 7,122 6 1 842.5
2002 Q2 1,387 0 0 0.0
2002 Q1 832 11 2 13221.2
2001 Q4 4,241 0 0 0.0
2001 Q3 4,320 0 0 0.0
2001 Q2 1,620 0 0 0.0
2001 Q1 451 0 0 0.0
2000 Q4 2,580 0 0 0.0
2000 Q3 4,068 0 0 0.0
2000 Q2 4,004 0 0 0.0
2000 Q1 0 0 0
No fatalities recorded at this mine.

Reportable incidents

52 on file

2008 · 1 incident

March 18, 2008 WI · Metal/Non-Metal outside foreman, leadman SLIP OR FALL OF PERSON
MCC, Inc. · Over-exertion (Not Elsewhere Classified)

Operator was moving to check a conveyor on spread and stepped in hole. Awkward step caused pain in back, which made the employee seek medical attention.

2007 · 2 incidents

June 21, 2007 WI · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer HANDLING OF MATERIALS
MCC, Inc. · Over-exertion in lifting objects

Employee was kneeling to lift a wooden block (dimensions=12"x12"x2'). The lifting & twisting caused severe back strain, leading him to be taken by ambulance to the nearest hospital. Unknown if proper lifting technique was used or if other methods were available to lift block. Worker was diagnosed with severe back strain and given medication for his injuries.

March 9, 2007 WI · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech SLIP OR FALL OF PERSON
MCC, Inc. · Over-exertion (Not Elsewhere Classified)

Employee was climbing down a ladder and twisted his ankle on a stone.

2006 · 1 incident

July 11, 2006 WI · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer POWERED HAULAGE
MCC, Inc. · Struck against a moving object

While operating loader on uneven ground, head and neck sustained whipping action.

2004 · 1 incident

January 5, 2004 WI · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer HANDTOOLS (NONPOWERED)
MCC, Inc. · Struck by... (Not Elsewhere Classified)

PRY BAR SLIPPED SMASHING LEFT THUMB.

2003 · 1 incident

June 12, 2003 WI · Metal/Non-Metal
MCC, Inc. · -

KNELT DOWN ON BOLT HEAD ON SCREEN DECK R KNEE CAP POPPED OUT AND BRUISED.

2002 · 1 incident

April 5, 2002 WI · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator SLIP OR FALL OF PERSON
MCC, Inc. · Fall onto or against objects

FOOT SLIPPED OFF LADDER AND HE HIT RIGHT KNEE ON CRUSHER.

1999 · 1 incident

March 8, 1999 WI · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator HANDLING OF MATERIALS
MCC, Inc. · Struck against stationary object

WHILE EMPLOYEE WAS WORKING ON A PLUGGED HOPPER, HE INJURED HIS KNEE ON A CROSS-MEMBER OF HOPPER.

1996 · 1 incident

June 11, 1996 WI · Metal/Non-Metal prep plant foreman, supervisor, mill plant supervisor, kiln supervisor POWERED HAULAGE
MCC, Inc. · Caught in, under or between (Not Elsewhere Classified)

SHOVELING ONTO BELT, ARM GOT CAUGHT IN BELT PULLEY. CONTUSIONS ARM AND SHOULDER, SUTURES IN ELBOW AREA.

1993 · 1 incident

March 19, 1993 WI · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer MACHINERY
MCC, Inc. · Flash burns (welding)

EMPLOYEE WAS WORKING IN SHOP & RECEIVED WELDING FLASH BURNS WHILE OTHER EMPLOYEE WAS WELDING

1992 · 1 incident

June 24, 1992 WI · Metal/Non-Metal outside foreman, leadman HANDLING OF MATERIALS
MCC, Inc. · Struck by falling object

EMPLOYEE WAS MOVING A PIECE OF STEEL FROM STORAGE RACK & IT RFELL ON HIS ANKLE SPRAINED ANKLE

1991 · 1 incident

April 24, 1991 WI · Metal/Non-Metal outside foreman, leadman HANDLING OF MATERIALS
MCC, Inc. · Over-exertion (Not Elsewhere Classified)

EMPLOYEE STATES THAT WHILE HE WAS TIPPING A 55-GAL DRUM, HE STRAINED HIS BACK.

1990 · 5 incidents

August 27, 1990 WI · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator MACHINERY
MCC, Inc. · Contact with hot objects or substances

WHILE ENGINE ON CRUSHER OVERHEATED EMPL OPENED RADIATOR CAP SLIGHTLY TO RELIEVE PRESSURE & THEN OPENED CAP FURTHER & HOT WATER SPRAYED ON ARM/CHEST AREA CAUSING SUPERFICIAL BURNS.

June 25, 1990 WI · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator SLIP OR FALL OF PERSON
MCC, Inc. · Fall from machine

EMPLOYEE WAS STANDING ON TOWING BAR OF BREAKER EQUIPMENT, SLIPPED AND FELL ON HIS BACK.

May 15, 1990 WI · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator HANDLING OF MATERIALS
MCC, Inc. · Struck by falling object

WHILE EE WAS PERFORMING MAINTENANCE ON LOADER. HE WAS LIFTING CARRYING VEHICLE RADIATOR AND FELL ON HIS TOE, BREAKING HIS LITLE TOE. HE WAS WEARING STEEL TOED SAFETY SHOES AT THE TIME.

March 5, 1990 WI · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator HANDTOOLS (NONPOWERED)
MCC, Inc. · Struck by... (Not Elsewhere Classified)

WHILE FOLDING WHEELS ON PORTABLE CONVEYOR, TO MOVE IT, EMPLOYEE WAS USING A PRY BAR AND IT SLIPPED, STRIKING AND BRUISING UPPER LEG.

February 5, 1990 WI · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech SLIP OR FALL OF PERSON
MCC, Inc. · Fall to the walkway or working surface

WHILE EMPLOYEE WAS WALKING ACROSS THE YARD FROM ONE BUILDING TO ANOTHER, HE SLIPPED ON ICE AND FELL ON HIS LEFT KNEE AND LEFT HAND/WRIST.

1988 · 5 incidents

July 21, 1988 WI · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
MCC, Inc. · Caught in, under or between (Not Elsewhere Classified)

HE WAS PUTTING HOOD BACK ON LOADER. AS HE WAS CRAWLING UP ON LOADER HOOD SLIPPED & CUT HIS HAND WHEN IT WAS PINCED BETWEEN HOOD & HAND RAIL HE HAD HOLD OF.

July 20, 1988 WI · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator POWERED HAULAGE
MCC, Inc. · Struck against stationary object

HE REMOVED STONE THAT WAS CAUGHT BETWEEN MOVING CONVEYOR & CONVEYOR SWEEPER. AFTER HE REMOVED STONE HE NOTICED HIS THUMB WAS LACERATED HE HASN'T ANY IDEA HOW LACERATION HAPPENED.

May 31, 1988 WI · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator HANDTOOLS (NONPOWERED)
MCC, Inc. · Struck by... (Not Elsewhere Classified)

A LARGE STONE WAS CAUGHT OVER THE JAWS IN THE CRUSHING PLANT. HE WAS USING A ROD TO FREE THE SOTONE. THE ROD GOT CAUGHT BETWEEN THE STONE AND JAWS CAUSING IT TO COME UP AND HIT HIM IN THE FAC E.

May 17, 1988 WI · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDTOOLS (NONPOWERED)
MCC, Inc. · Struck by flying object

USING PULLER TO REMOVE RACE FROM SHAFT RACE WAS ALMOST OFF WHEN PULLER SLIPPED OFF OF ONE SIDE OF RACE WHEN IT CAME OFF IT MADE ABOUT 225 DEGREE ARC BEFORE HITTING I.NAME WHO WAS BEHIND THE RA CE AND PULLER

April 5, 1988 WI · Metal/Non-Metal mechanic helper MACHINERY
MCC, Inc. · Contact with hot objects or substances

USING ARC AIR INSIDE WASHING PLANT DRUM. HOT METAL BLEW BACK LANDING ON COVERALLS BURNING RIGHT LEG IN 3 PLACES. SAND PARTICLES, DISTURBED BY ARC AIR BLEW INTO LEFT EYE.

1987 · 9 incidents

December 3, 1987 WI · Metal/Non-Metal MACHINERY
MCC, Inc. · Struck by... (Not Elsewhere Classified)

HE HAD JUST FIL5ED HIS GREASE GUN, CARRIED IT ABOUT 50 FEET AND LAYED IT DOWN ON HIS MACHINE. AS HE LAID IT DOWN, THE END BLEW OFF. THE END HIT HIM IN THE NOSE.

November 13, 1987 WI · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
MCC, Inc. · Over-exertion (Not Elsewhere Classified)

THEY WERE GOING3TO SET A TRANSMISSION ON BLOCKS. AS THEY WERE SETTING IT, IT STARTED TO SLIP I NBAME GRABBED AT THE TRANSMISSION, AND THE SNAP HURT HIS BACK.

September 10, 1987 WI · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator ELECTRICAL
MCC, Inc. · Flash burns (electric)

HE WAS STARTING3UP HIS MACHINE. USING BOTH HANDS HE STARTED TO TRIP THE FUSE BLADE DISCONNECT TO START THE CONVEYORS. AS THE BLADES MADE CONTACT FUSE BOX BLEW UP, BURNING THE FINGERS ON BOTH HANDS. 3

August 13, 1987 WI · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator HANDLING OF MATERIALS
MCC, Inc. · Struck by... (Not Elsewhere Classified)

HIS BREAKER WAS3PLUGGED, HE WAS GOING TO USE A CABLE TO LIFT OUT THE OVERSIZED ROCK. AS HE THREW THE CABLE DOWN ONE OF THE STRANS CUT HIS FINGER.

July 8, 1987 WI · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator HANDLING OF MATERIALS
MCC, Inc. · Caught in, under or between (Not Elsewhere Classified)

HIS BRAKER GOT 1LUGGED. HE WAS MOVING ONE ROCK OUT OF THE WAY TO GET TO ONE THAT WAS PLUGGING MACHINE. AS HE MOVED ONE ROCK IT PINCHED HIS FINGERS AGAINST ANOTHER STONE.

May 21, 1987 WI · Metal/Non-Metal driller, highwall operator, highwall drill operator MACHINERY
MCC, Inc. · Struck by... (Not Elsewhere Classified)

HE WAS DOING SO4E GRINDING THAT NIGHT HIS EYE BOTHERED HIM. WHEN TOLD THE NEXT DAY HE WAS SENT TO DR. FOUND PIECE OF METAL AND REMOVED. SAID HE WAS WEARING SAFETY GLASSES.

February 23, 1987 WI · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
MCC, Inc. · Struck by... (Not Elsewhere Classified)

WAS HALF LAYING3BENDING OVER DOING SOME WELDING CLOSE TO THE FLOOR.A LOADER TIRE GOT AWAY FROM THE OTHER GUYS.THE TIRE HIT HIM ON THE BACK AND SHOULDER,PUSHING HIM DOWN AND SMASHING HIS WELDIN G HELMET.THE GL5SS FROM HIS HELMET BROKE,CUTTING HIS FOREHEAD.GLASS PARTICLES WERE TAKEN OUT OF HIS FOREHEAD AND HE RECIEVED A FEW STITCHES.

February 19, 1987 WI · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech MACHINERY
MCC, Inc. · Struck by... (Not Elsewhere Classified)

WAS KNEELING US3NG A HAND GRINDER ON STEEL, THE GRINDER HIT A VETICAL PIECE OF STEEL WHICH CAUSED THE GRINDER TO BOUNCE BACK, HITTING THE LEG.

February 4, 1987 WI · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator OTHER
MCC, Inc. · Unclassified, insufficient data

ON 2 2 87 HE C5ME BACK FROM VACATION. WORKED 2 DAYS AND CALLED IN S ICK. CAME BACK 4 WEEKS LATER WORKED 1/2 DAY AND WENT HOME SICK. CAME BACK 2 1/2 WEEKS LATER, WORKED 2 DAYS AND CALLED IN S SICK. WE RECEIV9D A CALL FRO DR ON 3 31 87 DR SAID HE THINKS THIS MIGHT BE A WORK RELATED PROBLEM, BUT AT THIS TIME CAN NOT SAY IF IT IS OR IS NOT

1986 · 2 incidents

July 28, 1986 WI · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech SLIP OR FALL OF PERSON
MCC, Inc. · Fall from machine

HE JUMPED DOWN 2FF TRACKS OF THE CRANE LANDED IN A WASH OUT RUTRT TWISTING HIS LEFT ANKLE

April 29, 1986 WI · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer HANDLING OF MATERIALS
MCC, Inc. · Over-exertion in lifting objects

LIFTING FLAT TI9E OFF LOWBOY TRACTOR.AFTER HE GFRABBED IT AND STARTED TO LIFT HE FELT PAIN IN LOWER PART OF THE BACK.

1985 · 9 incidents

September 30, 1985 WI · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator SLIP OR FALL OF PERSON
MCC, Inc. · Fall from machine

HE WAS CLIMBING3DOWN FROM THE TOP OF THE CRUSHER. EVERYTHING WAS SLIPPERY AND WET HE SLIPPED OFF THE FRAMEWORK AND TWISTED HIS LEFT ANKLE

July 23, 1985 WI · Metal/Non-Metal welder (shop) MACHINERY
MCC, Inc. · Struck by flying object

HE WAS RUNNING THE ARK AIR WELDING TORCH WHEN HE TURNED ON THE AIR BLAST IT BLEW DIRT UP INTO HIS EYE

June 28, 1985 WI · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
MCC, Inc. · Struck against stationary object

IT APPARENTLY WAS BUMPED AT SOME TIME, AND STARTED TO GROW. THE EXACT DATE IS UNKNOWN. HE HAD BEEN AWARE FOR QUITE SOME TIME THAT THE SITUATION EXISTED. HE HAD SURGERY ON JUNE 28, 1985, MISSIN 6 DAYS OF WORK.

May 8, 1985 WI · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator HANDLING OF MATERIALS
MCC, Inc. · Caught in, under or between a moving and a stationary object

HE GOT HIS FINGER CAUGHT UNDER A 16\ IRON SHEET WHEN MOVING IT.

May 2, 1985 WI · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
MCC, Inc. · Over-exertion (Not Elsewhere Classified)

HE & ANOTHER EMPLOYEE WERE MOVING PIECE OF STEEL OTHER EMPLOYEE SET IT DOWN & IT FELL ABOUT 6 INCHES DON WAS STILL HANGING ONTO IT CAUSING IT TO TWIST HIS BACK

April 30, 1985 WI · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator STEPPING OR KNEELING ON OBJECT
MCC, Inc. · Struck against stationary object

HE WAS COMING DOWN THE LADDER ON THE CRUSHER, HE STEPPED ON A ROCK ON THE GROUND, TWISTING HIS RIGHT ANKLE.

April 19, 1985 WI · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator HANDTOOLS (NONPOWERED)
MCC, Inc. · Struck by... (Not Elsewhere Classified)

A ROCK WAS WEDGED IN THE JAWS OF A BREAKER. HE WAS USING A BAR TO PRY IT LOOSE. AS IT CAME LOOSE IT SNAPPED THE BAR FROM HIS RIGHT HAND HITTING HIS LEFT HAND.

April 8, 1985 WI · Metal/Non-Metal HANDLING OF MATERIALS
MCC, Inc. · Over-exertion in lifting objects

HE WAS GOING TO FUEL A ENGINE. AS HE WAS LIFTING HOSE TO PUT IT INTO THE TANK HE THINKS HE TWISTED JUST RIGHT & PULLED HIS BACK MUSCLES.

March 25, 1985 WI · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator SLIP OR FALL OF PERSON
MCC, Inc. · Fall from ladders

HE WAS WORKING ON A PRIMARY CRUSHING PLANT. COMING DOWN THE LADDER AT QUITING TIME. HIS FOOT SLIPPED AND HE FELL ABOUT 4 FEET TOT THE GROUND LANDING ON HIS BACK ON SOME LOOSE STONES.

1984 · 3 incidents

October 4, 1984 WI · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver HANDLING OF MATERIALS
MCC, Inc. · Caught in, under or between a moving and a stationary object

HE PINCHED HIS 2ND FINGER LEFT HAND IN THE DOOR OF THE EUCLID TRUCK. AFTER WORK HE WENT TO HIS DR., GETTING FOUR STITCHES.

September 27, 1984 WI · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator HANDTOOLS (NONPOWERED)
MCC, Inc. · Struck by falling object

HE WAS KNOCKING A PIN OUT OF A LOADER, WHEN THE PIN POPPED OUT THE ARM DROPPED PINCHING FINGER.

August 20, 1984 WI · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
MCC, Inc. · Over-exertion in lifting objects

HE WAS LIFTING A ROLL OF CONVEYOR BELT, AND STRAINED THE MUSCLES IN HIS LOWER BACK.

1983 · 7 incidents

November 10, 1983 WI · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer HANDLING OF MATERIALS
MCC, Inc. · Struck against stationary object

HE WAS MOVING A PIECE OF SHEET STEEL WHEN HE CAME IN CONTACT WITH A BUSH AND A TWIG GOT UNDER HIS SAFETY GLASSES AND HIT HIS RIGHT EYE

October 19, 1983 WI · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer HANDTOOLS (NONPOWERED)
MCC, Inc. · Struck by falling object

WAS SPLICING A BELT TIGHTENING BOLT WITH BRACE AND BIT FELT SOMETHING DROP INTO EYE THROUGHT IT WAS SAND WASHED EYE AT HOME FELT BETTER THURSDAY EYE STARTED TO BOTHER HIM WENT TO EN.MERGENCY ROOM DR FOUND STEEL IN EYE FRE HE STAYED HOME AND WENT TO DR BECKER FAMILY DR IN SHAWANO FROM THERE HE WAS SENT TO DR IN APPLETON

September 27, 1983 WI · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer HANDTOOLS (NONPOWERED)
MCC, Inc. · Caught in, under or between (Not Elsewhere Classified)

HE WAS USING A STEEL BAR TO PRY A STONE LOOSE - THE BAR JAMMED BETWEEN THE STONE AND JAWS OF THE BRE AKER PINCHING HIS FINGER BETWEEN THE BAR & FRAME OF THE MACHINE

August 15, 1983 WI · Metal/Non-Metal mechanic helper MACHINERY
MCC, Inc. · Struck by... (Not Elsewhere Classified)

USING SMALL GRINDER TO CUT OUT AROUND CRACKS IN WHEEL TO BE WELDED UP.WAS HOLDING GRINDER WITH LEFT HAND AND GUIDE WITH RIGHT.IT GOT AWAY FROM HIM AND HIT LITTLE FINGER -5 STITCHES IN LITTLE F ON RIGHT HAND.

May 24, 1983 WI · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech POWERED HAULAGE
MCC, Inc. · Struck by flying object

ONE OF THE CONVEYOR ON THE WASHING PLANT STOPPED. THE PROBLEM WAS SWITCH AFTER MAKING REPAIRS HIS THROW THE SWITCH TO START THE CONVEYOR AND FELT SOMETHING HIT HIS EYE HE THOUGH IT WAS SAND A WOOLD WASH OUT. LATER THAT NIGHT IT STARTED TO BOTHER HIM AND HE WENT TO THE E.R. AND FOUND OUT IT WAS METALIC.

April 14, 1983 WI · Metal/Non-Metal ledgeman/hand, quarry man HANDTOOLS (NONPOWERED)
MCC, Inc. · Struck by falling object

WORKING WITH PORT A POWER AVOBE HIS HEAD.WHEN HE RELEASED IT AND IT FELL AND HIT HIM ON FOREHEAD.

March 14, 1983 WI · Metal/Non-Metal coal/ore shovel operator, shoveler, power shoveler MACHINERY
MCC, Inc. · Struck by... (Not Elsewhere Classified)

HE WAS GOING TO USE A SHOVEL THAT HAD STOOD IDLE FOR SOME TIME WHEN HE ENGAGED THE HOIST CLUTCH PEDAL IT SNAPPED BACK THE CLUTCH BAND WAS RUSTED TO THE DRUM