Portable Plant #1 Metal/Non-Metal

EE was using a jack handle to lower a trailer, when the jack handle sprung back and hit him in his mouth. One tooth was knocked out and one tooth was broken off.

Two employees were repairing a tear on a conveyor belt. The tear had been cut out and the patch was being cut by the employee using a utility knife. As he was cutting the patch the knife slipped and cut his right calf muscle. The laceration required 5 stitches.

EE WAS HAULING SHOT ROCK FROM THE PIT TO THE CRUSHER WITH R25 EUCLID HAUL TRUCK. HE WAS BACKING UP TO GET LOADED WHEN HIS FRONT TIRE HIT A ROCK CAUSING THE STEERING WHEEL TO SPIN AND SPRAINED HIS RIGHT ARM.

EMPLOYEE WAS REMOVING TRAMP IRON FROM FEEDER, THE METAL SLIPPED ON ROCK'S PINCHING THE LEFT MIDDLE FINGER BETWEEN TRAMP IRON AND THE SIDE OF FEEDER.

EMPLOYEE WAS TAKING BOLTS OUT OF A LIFT CYLINDER ON A D8 DOZER. HE WAS TAKING BOLTS OFF AND PULLING DONW ON A BREAKOVER BAR.

EE WAS WORKING ON AN ELECTRICAL REPAIR IN THE CAB UNDER THE DASHBOARD. THE RIGHT FRONT RIDE CYLINDER COLLAPSED CAUSING THE RIGHT FRONT OF THE TRUCK TO DROP APPRO ONE FOOT. THE LEFT DRIVERS DOO R WAS OPENED AND THE EMPLOYEE WAS GRABBING THE DOOR FRAME FOR BALANCE. WHEN THE RIDE CYLINDER COLLAPSED THE DOOR CLOSED ON HIS FINGER.

EMPLOYEE WAS PULLING BOULDER OUT OF THE JAW. HE WAS PULLING IT BACK TO THE PRIMARY JAW AND SLIPPED ON SOME LOOSE ROCK AND TWISTED HIS KNEE.

EE WAS HOOKING UP NEW AIR GREASE GUN AND WHEN HE TESTED IT THE GREASE GUN BLEW UP IN HIS FACE. THE HOSE HIT HIM IN THE EYE AND BLEW GREASE IN HIS EYE.

EMPLOYEE BENT OVER, LIFTED A CRUSHER SCREEN OFF THE GROUND AND STRAINED HIS BACK.

EMPLOYEE WAS ATTEMPTING TO BREAK A ROCK IN THE CRUSHER JAW WITH A SLEDGE HAMMER AND HE PULLED SOME MUSCLES IN HIS UPPER BODY.

EE SLIPPED ON STEPS OF EUCLID. HIS FOOT CAUGHT BETWEEN 2 STEPS & HE FELL TWISTING HIS KNEE.

EMPLOYEE WAS ABOUT TO CUT A PIECE OF METAL WITH A CUTTING TORCH WHEN THE HOSE OF THE CUTTING TORCH EXPLODED.

EMPLOYEE WAS ATTEMPTING TO BREAK A ROCK IN THE CRUSHER JAW WITH A SLEDGE HAMMER. HIS LEFT ARM GAVE OUT CAUSING HIM TO TWIST HIS BACK.

DUMPING ON ROCK PILE, ROCK CAVED OUT FROM UNDER HIM AND EUCLID LOADER TURNED OVER.

OVERSEING REPAIRS WHEN A FOREIGN BODY GOT IN EMPLOYEE'S EYE.

EMPLOYEE WAS USING GRINDER TO MAKE REPAIRS. HIS SAFETY GLASSES HAD SLIPPED DOWN ON HIS NOSE. A PIECE OF METAL GOT INTO HIS EYE.

EE WAS PUSHING DOWN ON A BAR ON SCALES THAT WEIGH TRUCKS.

A NUT WAS STUCK UP IN SOCKET OF IMPACTOR. EMPLOYEE PUT HIS FINGER IN THE SOCKET TO GET IT OUT. HE APPARENTLY HIT THE TRIGGER. THE IMPACTOR SCREWED THE NUT ONTO HIS FINGER.

FEMPLOYEE WAS SITTING ON A CAN WELDING AND THE CAN EXPLODED. THE CAN WAS EMPTY BUT APPARENTLY HAD GASOLINE IN IT AT SOMETIME.

JUST COMPLETED WELDING ON CRUSHER JAW & WAS COMING DOWN LADDER & STEPPED ON UNDECTED ROCK ON CAT WALK, ANKLE TURNED UNDER & SNAPPED.

WELDING ASSEMBLY TAIL PULLEY ON CRUSHER WHEN SLAG HIT RIGHT EYE.

WELDING OVERHEAD ON A MOTOR BRACKET WHEN A PIECE OF SLAG RICOCHET INTO RIGHT EYE.

SLIPPED OFF STEP WHILE DISMOUNTING FROM EUCLID TRUCK.

THROWING PIECE OF METAL TO GROUND FOOT SLIPPED LOST BALANCE AND FELL APPROX. 8FT TO GROUND.

SLIPPED ON LADDER WHILE ATTEMPTING TO REACH & PICK UP AN ITEM THIS RESULTED IN AN INJURED LITTLE FINGER ON LEFT HAND.

EMPLOYEE WAS STEPPING DOWN FROM FRONT END LOADER MISSED STEP & FELL HURTING HIS HIP & BACK

REMOVING JAW FROM CRUSHER-PIECE OF METAL FLEW FROM JAW HITTING EE ON LEFT SHOULDER.