Mining Incidents

QUARRY SLATE IND.: 123 MSHA citations Metal/Non-Metal

Poultney, Rutland County, VT  ·  Active
MSHA Mine ID: 4300012

QUARRY SLATE IND. has $14K in proposed MSHA penalties and $2K outstanding across 0 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at QUARRY SLATE IND..

Fatalities
0
Total incidents
30
Years on record
1985–2025
Latest incident
Sep 2025
Compliance record
MSHA citations since 2000
123
citations
27
significant & substantial
$14,275
proposed penalties
$12,673
paid to date
89% of proposed penalties paid to date, a $1,602 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2000
93
inspections on record
1,806
inspection hours
6.8
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
123 citations across 1,806 inspection hours.
Source: MSHA inspections data, updated weekly.

QUARRY SLATE IND. has $14K in proposed MSHA penalties and $2K outstanding across 0 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$14K
proposed penalties
$14K
current assessed
$13K
paid to date
$2K
outstanding
121 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2026-03-10.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
22.0%
significant & substantial
0.0%
high negligence or reckless
22.0%
reasonably likely or greater
48.0%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 35.8% low, 64.2% moderate, 0.0% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2026-03-10
27%
of limit-tested samples over the exposure limit
84
samples
74
limit-tested
Most sampled contaminants
  • Quartz, respirable, >1% Qtz7620 over
  • Respirable dust, <.1mg8
Show the individual readings (84)
Date Contaminant Concentration Limit Conc / limit Occupation
2024-11-20 Quartz, respirable, >1% Qtz 0.47 0.42 1.12 Stone Polisher/Cutter
2024-03-19 Quartz, respirable, >1% Qtz 0.7 0.5 1.40 Stone Polisher/Cutter
2024-02-22 Quartz, respirable, >1% Qtz 0.86 0.67 1.28 Stone Polisher/Cutter
2023-08-09 Quartz, respirable, >1% Qtz 0.81 0.42 1.93 Cutting Mach Operator
2022-11-29 Quartz, respirable, >1% Qtz 0.64 0.46 1.39 Stone Polisher/Cutter
2022-11-29 Quartz, respirable, >1% Qtz 0.98 0.73 1.34 Stone Polisher/Cutter
2019-04-10 Quartz, respirable, >1% Qtz 1.55 0.6 2.58 Stone Polisher/Cutter
2019-03-13 Quartz, respirable, >1% Qtz 2.44 0.47 5.19 Stone Polisher/Cutter
2019-03-13 Quartz, respirable, >1% Qtz 1.74 0.53 3.28 Stone Polisher/Cutter
2016-02-24 Quartz, respirable, >1% Qtz 2.04 0.5 4.08 Stone Polisher/Cutter
2016-02-24 Quartz, respirable, >1% Qtz 1.24 0.42 2.95 Stone Polisher/Cutter
2014-12-02 Quartz, respirable, >1% Qtz 0.56 0.48 1.17 Stone Polisher/Cutter
2014-09-30 Quartz, respirable, >1% Qtz 0.63 0.51 1.24 Stone Polisher/Cutter
2014-08-20 Quartz, respirable, >1% Qtz 0.62 0.47 1.32 Stone Polisher/Cutter
2014-08-20 Quartz, respirable, >1% Qtz 1.12 0.77 1.45 Stone Polisher/Cutter
2010-02-18 Quartz, respirable, >1% Qtz 0.45 0.4 1.13 Stone Polisher/Cutter
2006-01-25 Quartz, respirable, >1% Qtz 0.47 0.47 1.00 Stone Polisher/Cutter
2004-04-28 Quartz, respirable, >1% Qtz 1.01 0.66 1.53 Stone Polisher/Cutter
2004-01-27 Quartz, respirable, >1% Qtz 1.39 0.45 3.09 Stone Polisher/Cutter
2003-03-06 Quartz, respirable, >1% Qtz 1.32 0.47 2.81 Stone Polisher/Cutter
2026-03-10 Quartz, respirable, >1% Qtz 0.41 0.56 0.73 Stone Polisher/Cutter
2026-03-10 Quartz, respirable, >1% Qtz 0.16 0.58 0.28 Utility Man
2026-03-10 Quartz, respirable, >1% Qtz 0.2 0.5 0.40 Utility Man
2024-11-20 Quartz, respirable, >1% Qtz 0.38 0.51 0.75 Stone Polisher/Cutter
2024-11-20 Quartz, respirable, >1% Qtz 0.21 0.47 0.45 Stone Polisher/Cutter
2024-11-20 Quartz, respirable, >1% Qtz 0.26 0.51 0.51 Stone Polisher/Cutter
2024-11-20 Quartz, respirable, >1% Qtz 0.27 0.45 0.60 Stone Polisher/Cutter
2024-11-20 Quartz, respirable, >1% Qtz 0.34 0.44 0.77 Stone Polisher/Cutter
2024-11-20 Respirable dust, <.1mg 0 Stone Polisher/Cutter
2024-11-20 Respirable dust, <.1mg 0 Stone Polisher/Cutter
2024-11-20 Respirable dust, <.1mg 0 Stone Polisher/Cutter
2024-11-20 Quartz, respirable, >1% Qtz 0.21 0.65 0.32 Stone Polisher/Cutter
2024-05-07 Quartz, respirable, >1% Qtz 0.33 1.15 0.29 Stone Polisher/Cutter
2024-02-22 Quartz, respirable, >1% Qtz 0.41 0.59 0.69 Stone Polisher/Cutter
2023-09-20 Quartz, respirable, >1% Qtz 0.4 0.49 0.82 Cutting Mach Operator
2023-08-09 Quartz, respirable, >1% Qtz 0.29 0.61 0.48 Cutting Mach Operator
2023-01-19 Quartz, respirable, >1% Qtz 0.41 0.54 0.76 Stone Polisher/Cutter
2023-01-19 Quartz, respirable, >1% Qtz 0.19 0.68 0.28 Stone Polisher/Cutter
2022-11-29 Respirable dust, <.1mg 0 Front-end Loader Operator
2022-11-29 Quartz, respirable, >1% Qtz 0.48 0.71 0.68 Stone Polisher/Cutter
2021-08-26 Respirable dust, <.1mg 0 Washer Operator
2021-08-26 Quartz, respirable, >1% Qtz 0.42 0.62 0.68 Washer Operator
2019-05-15 Quartz, respirable, >1% Qtz 0.23 Stone Polisher/Cutter
2019-04-10 Quartz, respirable, >1% Qtz 0.44 Stone Polisher/Cutter
2019-03-13 Quartz, respirable, >1% Qtz 0.51 0.85 0.60 Stone Polisher/Cutter
2016-03-23 Quartz, respirable, >1% Qtz 0.25 0.43 0.58 Stone Polisher/Cutter
2016-03-23 Quartz, respirable, >1% Qtz 0.43 0.52 0.83 Stone Polisher/Cutter
2014-09-30 Quartz, respirable, >1% Qtz 0.24 0.49 0.49 Stone Polisher/Cutter
2014-08-20 Quartz, respirable, >1% Qtz 0.2 0.46 0.43 Stone Polisher/Cutter
2014-08-20 Quartz, respirable, >1% Qtz 0.21 0.45 0.47 Stone Polisher/Cutter
2014-08-20 Quartz, respirable, >1% Qtz 0.32 0.45 0.71 Stone Polisher/Cutter
2012-10-03 Quartz, respirable, >1% Qtz 0.22 0.55 0.40 Stone Polisher/Cutter
2012-10-03 Quartz, respirable, >1% Qtz 0.13 0.36 0.36 Stone Polisher/Cutter
2012-10-03 Quartz, respirable, >1% Qtz 0.22 0.8 0.28 Stone Polisher/Cutter
2012-10-03 Quartz, respirable, >1% Qtz 0.17 0.33 0.52 Stone Polisher/Cutter
2012-10-03 Quartz, respirable, >1% Qtz 0.19 0.41 0.46 Stone Polisher/Cutter
2012-10-02 Quartz, respirable, >1% Qtz 0.16 0.4 0.40 Utility Man
2012-10-02 Quartz, respirable, >1% Qtz 0.32 0.46 0.70 Stone Polisher/Cutter
2012-10-02 Quartz, respirable, >1% Qtz 0.34 0.39 0.87 Stone Polisher/Cutter
2012-10-02 Quartz, respirable, >1% Qtz 0.21 0.51 0.41 Forklift Operator
2012-10-02 Quartz, respirable, >1% Qtz 0.31 0.38 0.82 Stone Polisher/Cutter
2010-02-18 Quartz, respirable, >1% Qtz 0.17 0.48 0.35 Stone Polisher/Cutter
2007-10-24 Quartz, respirable, >1% Qtz 0.17 0.64 0.27 Stone Polisher/Cutter
2007-10-24 Quartz, respirable, >1% Qtz 0.32 0.53 0.60 Stone Polisher/Cutter
2007-10-24 Quartz, respirable, >1% Qtz 0.15 0.6 0.25 Stone Polisher/Cutter
2007-10-24 Quartz, respirable, >1% Qtz 0.14 0.61 0.23 Stone Polisher/Cutter
2006-01-25 Quartz, respirable, >1% Qtz 0.25 0.46 0.54 Stone Polisher/Cutter
2006-01-25 Quartz, respirable, >1% Qtz 0.3 0.61 0.49 Stone Polisher/Cutter
2006-01-25 Quartz, respirable, >1% Qtz 0.21 1.42 0.15 Stone Polisher/Cutter
2006-01-25 Quartz, respirable, >1% Qtz 0.38 0.66 0.58 Stone Polisher/Cutter
2005-03-03 Quartz, respirable, >1% Qtz 0.36 0.52 0.69 Stone Polisher/Cutter
2005-03-03 Quartz, respirable, >1% Qtz 0.5 0.51 0.98 Stone Polisher/Cutter
2005-03-03 Respirable dust, <.1mg 0 Stone Polisher/Cutter
2005-03-03 Quartz, respirable, >1% Qtz 0.24 0.4 0.60 Forklift Operator
2004-08-24 Respirable dust, <.1mg 0 Stone Polisher/Cutter
2004-01-27 Quartz, respirable, >1% Qtz 0.68 0.72 0.94 Stone Polisher/Cutter
2004-01-27 Quartz, respirable, >1% Qtz 0.18 0.63 0.29 Stone Polisher/Cutter
2004-01-27 Quartz, respirable, >1% Qtz 0.15 0.46 0.33 Stone Polisher/Cutter
2003-05-08 Quartz, respirable, >1% Qtz 0.22 0.42 0.52 Stone Polisher/Cutter
2003-05-08 Respirable dust, <.1mg 0 Stone Polisher/Cutter
2003-03-06 Quartz, respirable, >1% Qtz 0.31 0.49 0.63 Stone Polisher/Cutter
2003-03-06 Quartz, respirable, >1% Qtz 0.23 0.64 0.36 Stone Polisher/Cutter
2003-03-06 Quartz, respirable, >1% Qtz 0.31 0.83 0.37 Stone Polisher/Cutter
2000-07-20 Quartz, respirable, >1% Qtz 0.3 0.48 0.63 Stone Polisher/Cutter

Area samples (mill and shop air)

Last sampled: 2024-11-20
1
samples
Show the individual readings (2)
Date Contaminant Concentration Limit Conc / limit Area sampled
2024-11-20 ANALYZED BULK DUST MASS 0 MP GENERAL
2024-11-20 QUARTZ (BULK DUST) 0 MP GENERAL
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.

QUARRY SLATE IND. recorded 2.20 reportable injury cases per 100 full-time workers in 2025.

Injury rate, 2025
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
2.20
total case rate
2.20
days-away rate
0.000
fatality rate
Above average. The US metal and nonmetal mining average was 1.65 and the all-US-mining average was 1.97 cases per 100 workers.
In Vermont, metal and nonmetal mining averaged 2.67 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2025 * 2.20 2.20 0.000
2024 * 4.37 4.37 0.000
2023 * 0.00 0.00 0.000
2022 * 2.35 2.35 0.000
2021 * 0.00 0.00 0.000
2020 * 0.00 0.00 0.000
2019 * 0.00 0.00 0.000
2018 * 0.00 0.00 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
  1. Quarry Slate Industries 1950 to 2014
  2. Greenstone Slate Company 2014 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year Employees
2026 42
2025 43
2024 45
2023 43
2022 42
2021 41
2020 37
2019 40
2018 41
2017 40
2016 48
2015 52
2014 54
2013 52
2012 55
2011 51
2010 47
2009 52
2008 55
2007 61
2006 58
2005 53
2004 53
2003 47
2002 45
2001 50
2000 52
Source: MSHA quarterly employment and production, updated weekly.

QUARRY SLATE IND. sits in Rutland County, Vermont, where the Census mining category is 0.5% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Rutland County, Vermont · Population 60,484
0.5%
Mining share of county employment
$64,778
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2026 Q2 25,274 0 0 0.0
2026 Q1 24,002 1 0 41.7
2025 Q4 24,990 0 0 0.0
2025 Q3 20,772 0 0 0.0
2025 Q2 22,782 4 0 175.6
2025 Q1 22,424 0 0 0.0
2024 Q4 23,424 6 0 256.1
2024 Q3 21,581 0 0 0.0
Show 98 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2024 Q2 24,503 0 0 0.0
2024 Q1 21,938 1 1 45.6
2023 Q4 30,537 0 0 0.0
2023 Q3 23,546 2 0 84.9
2023 Q2 22,281 0 0 0.0
2023 Q1 20,795 0 0 0.0
2022 Q4 19,980 6 2 300.3
2022 Q3 22,484 0 0 0.0
2022 Q2 22,144 2 2 90.3
2022 Q1 20,598 0 0 0.0
2021 Q4 21,849 0 0 0.0
2021 Q3 22,586 1 0 44.3
2021 Q2 20,936 0 0 0.0
2021 Q1 19,691 0 0 0.0
2020 Q4 21,179 0 0 0.0
2020 Q3 20,028 0 0 0.0
2020 Q2 13,760 0 0 0.0
2020 Q1 21,443 0 0 0.0
2019 Q4 20,380 0 0 0.0
2019 Q3 20,433 0 0 0.0
2019 Q2 21,065 2 2 94.9
2019 Q1 20,232 2 0 98.9
2018 Q4 20,042 0 0 0.0
2018 Q3 22,428 0 0 0.0
2018 Q2 21,667 0 0 0.0
2018 Q1 20,427 0 0 0.0
2017 Q4 19,933 0 0 0.0
2017 Q3 20,882 0 0 0.0
2017 Q2 20,879 1 0 47.9
2017 Q1 21,346 0 0 0.0
2016 Q4 22,934 0 0 0.0
2016 Q3 26,750 1 0 37.4
2016 Q2 28,072 0 0 0.0
2016 Q1 21,509 5 2 232.5
2015 Q4 27,613 0 0 0.0
2015 Q3 27,590 1 1 36.2
2015 Q2 28,639 0 0 0.0
2015 Q1 24,238 1 0 41.3
2014 Q4 29,463 1 0 33.9
2014 Q3 29,497 3 2 101.7
2014 Q2 28,464 0 0 0.0
2014 Q1 27,517 0 0 0.0
2013 Q4 24,860 2 0 80.5
2013 Q3 25,163 2 0 79.5
2013 Q2 26,990 0 0 0.0
2013 Q1 26,075 6 1 230.1
2012 Q4 24,628 0 0 0.0
2012 Q3 26,895 0 0 0.0
2012 Q2 26,731 0 0 0.0
2012 Q1 25,675 3 0 116.8
2011 Q4 25,064 0 0 0.0
2011 Q3 26,025 0 0 0.0
2011 Q2 25,376 3 0 118.2
2011 Q1 22,523 8 1 355.2
2010 Q4 25,138 0 0 0.0
2010 Q3 25,856 2 0 77.4
2010 Q2 23,631 0 0 0.0
2010 Q1 21,643 3 0 138.6
2009 Q4 27,153 0 0 0.0
2009 Q3 26,728 4 0 149.7
2009 Q2 25,917 0 0 0.0
2009 Q1 19,936 2 0 100.3
2008 Q4 29,797 0 0 0.0
2008 Q3 29,554 0 0 0.0
2008 Q2 24,684 0 0 0.0
2008 Q1 23,360 0 0 0.0
2007 Q4 32,984 1 1 30.3
2007 Q3 30,085 0 0 0.0
2007 Q2 30,908 2 0 64.7
2007 Q1 25,967 4 0 154.0
2006 Q4 30,253 1 0 33.1
2006 Q3 32,215 2 0 62.1
2006 Q2 33,150 0 0 0.0
2006 Q1 28,865 2 0 69.3
2005 Q4 30,058 0 0 0.0
2005 Q3 31,265 2 0 64.0
2005 Q2 27,601 0 0 0.0
2005 Q1 24,108 4 1 165.9
2004 Q4 28,176 0 0 0.0
2004 Q3 26,386 0 0 0.0
2004 Q2 24,205 0 0 0.0
2004 Q1 20,012 7 2 349.8
2003 Q4 25,497 1 0 39.2
2003 Q3 23,574 0 0 0.0
2003 Q2 19,801 0 0 0.0
2003 Q1 14,846 1 1 67.4
2002 Q4 19,237 0 0 0.0
2002 Q3 19,851 0 0 0.0
2002 Q2 21,483 0 0 0.0
2002 Q1 21,997 3 2 136.4
2001 Q4 22,579 0 0 0.0
2001 Q3 22,375 0 0 0.0
2001 Q2 20,790 5 1 240.5
2001 Q1 19,568 0 0 0.0
2000 Q4 25,671 0 0 0.0
2000 Q3 24,307 2 0 82.3
2000 Q2 21,088 0 0 0.0
2000 Q1 18,415 9 5 488.7
No fatalities recorded at this mine.

Reportable incidents

30 on file

2025 · 1 incident

September 15, 2025 VT · Metal/Non-Metal stone finishing and sizing personnel, stone/rock cut/polish/saw operator, splitter, cutter, trimmer SLIP OR FALL OF PERSON
Greenstone Slate Company · Fall from machine

Climbed on rollers, fell, ankle fracture

2024 · 2 incidents

October 30, 2024 VT · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator MACHINERY
Greenstone Slate Company · Caught in, under or between a moving and a stationary object

Employee put hand inside of guard for a drill, glove hit the drill bit and pulled hand into the drill bit injuring left ring finger.

2022 · 1 incident

March 7, 2022 VT · Metal/Non-Metal stone finishing and sizing personnel, stone/rock cut/polish/saw operator, splitter, cutter, trimmer SLIP OR FALL OF PERSON
Greenstone Slate Company · Fall onto or against objects

Slip and fall, fell on a metal dump box, fractured jaw

2017 · 1 incident

January 31, 2017 VT · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver SLIP OR FALL OF PERSON
Greenstone Slate Company · Fall onto or against objects

Slip and fall on ice, cut knee on stone block

2016 · 1 incident

December 12, 2016 VT · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech SLIP OR FALL OF PERSON
Greenstone Slate Company · Fall to the walkway or working surface

Slip & fall on cement floor, hairline fracture to right heel.

2015 · 1 incident

July 15, 2015 VT · Metal/Non-Metal stone finishing and sizing personnel, stone/rock cut/polish/saw operator, splitter, cutter, trimmer SLIP OR FALL OF PERSON
Greenstone Slate Company · Fall onto or against objects

Employee was climbing on a series of power rolls to change a light bulb. The employee mis stepped falling through the rolls. Possibly fracturing his right femur

2005 · 1 incident

November 7, 2005 VT · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman MACHINERY
Quarry Slate Industries · Struck by... (Not Elsewhere Classified)

EE suffered a severe finger inury at 2:30 pm while operating a barrel trimming machine. He wipe away debris from the machine was operating to wipe the tile clean of debris. He failed to turn the rotary blade off. Blade struck his left ring and middle fingers. removal of approx. half inch of the left ring finger and approx. one inch of the left middle finger.

2002 · 1 incident

2001 · 1 incident

August 2, 2001 VT · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator HANDTOOLS (NONPOWERED)
Quarry Slate Industries · Struck by... (Not Elsewhere Classified)

WHILE CLEAVING A STONE, THE HAND HELD HAMMER FELL AND HIT THE EMPLOYEES LEG. EMPLOYEE NOTIFIED THE COMPANY THE LEG WAS BROKE.

1999 · 3 incidents

November 30, 1999 VT · Metal/Non-Metal shaft repair, skip tender, station tender SLIP OR FALL OF PERSON
Quarry Slate Industries · Fall from machine

EE IS LIFT TRUCK OPERATOR WHO STOPPED MACHINE HE WAS DISMOUNTINGFROM MACHINE WHICH WAS STOPPED& EMERGENCY BRAKE APPLIED. SLIPPED & FEET FLEW OUT BENEATH HIM WHILE GETTING OFF MACHINE

August 27, 1999 VT · Metal/Non-Metal miner, prospector, nec MACHINERY
Quarry Slate Industries · Over-exertion (Not Elsewhere Classified)

EMPLOYEE DOES NOT KNOW WHAT HAPPENED, BUT COMPLAINED OF BACK PAIN AROUND 9:00 AM. DIAGNOSED AS LUMBRAL STRAIN. RETURNED TO WORK 9-9-99 FULL DUTY

January 19, 1999 VT · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman POWERED HAULAGE
Quarry Slate Industries · Struck by powered moving object

EE STEPPED INTO PATH OF LIFT TRUCK DESPITE BACKUP ALARM & FLASHING BACKUP LIGHTS--SENT TO DR. FOR EXAM--FOUND POSSIBLE BLADDER CONTUSION--NO CONFIRMED INJURY.

1996 · 1 incident

November 18, 1996 VT · Metal/Non-Metal prep plant foreman, supervisor, mill plant supervisor, kiln supervisor HANDTOOLS (NONPOWERED)
Quarry Slate Industries · Struck by falling object

EE WORKING ON STONE WHILE IT WAS ON LIFT TRUCK FORK. STONE SLID OFF FORKS AND LACERATED LEFT FOOT.

1994 · 1 incident

January 25, 1994 VT · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator SLIP OR FALL OF PERSON
Quarry Slate Industries · Fall to the walkway or working surface

SLIPPED ON ICE ON FLOOR AND SUFFERED HAIRLINE FRACTURE TO LEFT ELBOW.

1993 · 2 incidents

November 12, 1993 VT · Metal/Non-Metal ledgeman/hand, quarry man MACHINERY
Quarry Slate Industries · Over-exertion in pulling or pushing objects

PULLING ON STONE ON SAW- SPRAINED LOWER BACK MUSCLES.

January 4, 1993 VT · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDLING OF MATERIALS
Quarry Slate Industries · Over-exertion in lifting objects

EMPLOYEE WAS LIFTING OR MOVING A STONE WHEN HE INJURED BACK.

1992 · 1 incident

April 10, 1992 VT · Metal/Non-Metal coal/ore shovel operator, shoveler, power shoveler MACHINERY
Quarry Slate Industries · Struck by falling object

DROPPED ROCK HAMMER ON FOOT 4 FRACTURES RIGHT MIDDLE TOE. EMPLOYEE WAS WEARING SAFETY SHOES.

1990 · 4 incidents

December 5, 1990 VT · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDTOOLS (NONPOWERED)
Quarry Slate Industries · Struck by... (Not Elsewhere Classified)

EMPLOYEE STRUCK LEFT HAND WITH HAMMER HELD IN RIGHT HAND.

May 25, 1990 VT · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman EXPLOSIVES AND BREAKING AGENTS
Quarry Slate Industries · Struck by flying object

RICOCHETED FLYROCK STRUCK TAILGATE OF DUMP TRUCK AND BOUNCED OUT OF BOX AND STRUCK EMPL ON OUTSIDE OF LEFT FOOT.

April 20, 1990 VT · Metal/Non-Metal ledgeman/hand, quarry man HANDLING OF MATERIALS
Quarry Slate Industries · Over-exertion in pulling or pushing objects

EMPLOYEE DEVELOPED HERNIA ON LEFT LOWER ABDOMINAL WALL SURROUNDING AREA OF OLD SCAR. NO DEFINITE DATE OF INJURY OR REASON FOR INJURY KNOWN. MAY HAVE BEEN CAUSED BY REPEATED LIFTING.

March 9, 1990 VT · Metal/Non-Metal SLIP OR FALL OF PERSON
Quarry Slate Industries · Fall onto or against objects

I.NAME WAS PUSHING STONE ON ROLLER CONVEYORS WHEN HE SLIPPED AND CUT HIS LEFT FOREARM REQUIRING FIRST AID AND SUTURES. DIDN'T MISS ANY TIME.

1988 · 7 incidents

September 28, 1988 VT · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator HANDLING OF MATERIALS
Quarry Slate Industries · Caught in, under or between a moving and a stationary object

PUSHING STONE OFF ?SECOND PLACE?.PUSHED STONE ON HIS OWN FINGER SMASHED LEFT MIDDLE FINGER.

July 29, 1988 VT · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDLING OF MATERIALS
Quarry Slate Industries · Struck against stationary object

EMPLOYEE WAS WEIGHING PALLET WHEN HE BUMPED H IS ARM INTO A SHARP STONE LACERATED LEFT FOREARM 1ST AID & STITCHES

July 26, 1988 VT · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech POWERED HAULAGE
Quarry Slate Industries · Caught in, under or between a moving and a stationary object

I.NAME WAS REPAIRING CONVEYOR WHEN A XXX EMPLOYEE INADVERTENTLY TURNED THE CONVEYOR ON LEFT HAND WAS LACERATED LEFT INDEX FINGER WAS SERIOUSLY LACERATED WITH DAMAGE TO JOINT TENDONS

June 7, 1988 VT · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator HANDLING OF MATERIALS
Quarry Slate Industries · Struck against stationary object

TOUCHED FINGER AGAINST STONE. LEFT INDEX FINGER CUT-NEEDED FIRST AID & 3 STITCHES.

March 26, 1988 VT · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech MACHINERY
Quarry Slate Industries · Struck by... (Not Elsewhere Classified)

BRUSHED CHAIN SAW AGAINST HIS LEG WHILE CUTTING LOG. LACERATION TO LEFT LEG-NEEDED STITCHES.

1985 · 1 incident

March 15, 1985 VT · Metal/Non-Metal miner, prospector, nec MACHINERY
Quarry Slate Industries · Struck by... (Not Elsewhere Classified)

EMPLOYEE WAS TRIMMING SLATE WHEN A PILE OF CHIPS FELL FROM A PALLET, STRIKING HIM IN THE BACK OF THE CALVES, AND PUSHING HIM INTO THE TRIMMING MACHINE. HE CAUGHT HIMSELF WITH HIS LEFT HAND, WH ICH WAS TRUCK BY THE BLADE. INJURIES OPEN FX INDEX FINGER, OPEN FX MIDDLE FINGER SUSEQUENTLY AMPUTAUTED LACERATION.