River Road Quarry Metal/Non-Metal

Employee received a laceration and fracture to left thumb when it was struck by a come-a-long.

Injured employee is allegedly claiming a 8 inch rock fell from an area overhead at the primary crusher frame. Striking him in the right shoulder. The primary crusher was not operating during this clean out process.

Injured employee and another employee had set the crusher ring and were unhooking the crusher ring from the crane. The shackles and straps were laid on side of crusher frame the crane operator started lifting the hoist of the crane and the shackles came off the side of crusher frame and hit injured employee in the mouth, chipping two teeth.

Sharpening drill bit with small air grinder, foreign object allegedly hit eye. EE stated he was wearing safety glasses.

The injured employee was operating a haul truck in the pit. As he descended towards the bottom of the ramp, he lost control of the truck and traveled off the roadway striking his forehead against the windshield.

Injured employee was drilling a hole in the junction box using a hole saw. When the drill bit punched through, the hole saw teeth grabbed the box and the drill slipped out of injured employees hand and hitting him in the mouth. Resulting in stitches.

Injury happend on 7/24/09, but did not get medical treatment until 8/05/09. Injured employee was assisting other employees, swinging a 16lb sledge hammer trying to loosen a nut on the liner of the head of the crusher. Resulting in a shoulder stain.

Employee was operating a Mack DM 690 water truck watering roads. Employee lost control of truck and jumped out resulting in injury to wrist, ankle, knee & head.

The ee was checking a belt for a problem and his glove was pulled into the belt under skirt rubber. Two fingers on left hand were mashed.

THE EMPLOYEE WAS FREEING LODGED ROCK AT THE #3 HEAD BOX BELT. HE WAS USING A PRY BAR AND IT SLIPPED AND HE HIT HIS KNUCKLES ON HIS RIGHT HAND RESULTING IN A CONTUSION.

THE EMPLOYEE WAS STANDING ON A STEP LADDER CHANGING THE OIL IN A 210 KOMATSU TRUCK. HE WAS LEANING AGAINST THE TRUCK FRAME ON HIS RIGHT SIDE AND FELT PAIN IN HIS RIGHT SIDE.

THE EE WAS IN BIN BREAKING UP BIG CLUMP OF MATERIAL. HE WAS PREPARING TO EXIT & MATERAIL BROKE LOOSE AND FELL AROUND HIM

THE EE WAS CARRYING A PIECE OF METAL UP STEPS TO SAND SCREW AND HIS KNEE POPPED.

THE EMPLOYEE WAS WALKING OUT OF SHOP AND TRIPPEDOVER A ROCK AND FELL TO GROUND INJURING RIGHT SHOULDER. " DID NOT BECOME REPORTABLE UNTIL 3.13.98".

THE EE WAS GREASING BELTS AND AS HE TURNED AROUND, HE TWISTED HIS KNEE.

EMPLOYEE WAS OPERATING A HAUL TRUCK AND PULLED LEVER FOR BED TO DUMP AND STRAINED HIS HAND.

REPETIVE MOTION OF OPERATING EQUIPMENT, EMPLOYEE ALLEGES CAUSED CARPAL TUNNEL.

EMPLOYEE AS WASHING TRUCK WITH STEAM CLEANNER AND HAD FINISHED. EMPLOYEE LAID SPRAY WAND DOWN TO TURN OFF MACHINE. WATER PRESSURE CAUSED WANT TO BREAK LOOSE FROM MOUNT AND STEAM SPRAYED EMPL OYEES LEFT FOOT.

1ST EMPLOYEE WELDING ON QUARRY WATER LINE WHICH GOES UP BESIDE QUARRY WALL. SECOND EMPLOYEE WAS STANDING IN BOAT TYING A ROPE TO A PRY BAR WHICH #1 EMPLOYEE NEEDED. WHLE TYING ROPE ROCK FELL FROM QUARRY WALL STRIKING #2 EMPLOYEE IN THE HEAD.

54736YEE HAD THE BUCKET OF THE BOBCAT RAISED INT EH AIR AND WAS WELDING ON THE BOTTOM SIDE. WHILE WELDING ONT EH BUCKET A SPARK OF FIRE FELLL IN HIS LEFT EAR.

EMPLOYEE WAS INSTALLING AN AIR CONDITIONER UNIT IN CAB OF DOZER. HOLE IN TOP OF CAB HAD PREVIOUSLY BEEN CUT WITH CUTTING TORCH, CAUSING PAIN IN TOP OF CAB TO BURN AND FLAKE OFF. WHILE INSTALLI NG UNIT AT A LATER TIME, A SMALL FLAKE OF BURNT PAINT FELL IN EMPLOYEE'S LEFT EYE. EMPLOYEE WAS WEARING SAFETY GLASSES.

EMPLOYEE WAS WELDING AND CUTTING ON BUSHING IN PRIMARY CRUSHER USING CLEAR LENS OVER HIS EYES FOR CUTTING BECAUSE IT WAS TO DARK TO SEE WITH DARK LNES. FLASH FROM WELDING AND CUTTING BURNED BO TH EYES, BUT THE RIGHT EYE WAS BURNED MORE SERIUOS. EMPLOYEE USED DARK LENS TO WELD WITH.

CHUTE AT PUGMIL5 CLOGGED UP. EMPLOYEE HAD ONE END OF A 3" DIAMETER BAR RESTING ON THE GROUND AND WAS SWINGING THE TOP PART OF THE BAR AGAINST THE HOPPER TRYING TO LOOSEN MATERIAL. WHEN HE SWU NG THE BAR, HE 2IT HIS RING FINGER ON HIS LEFT HAND AGAINST A PIECE OF ANGLE IRON.

EMPLOYEE DIGGIN1 WITH BAR TO UNCLOG BIN. MATERIAL CAME LOOSE. BAR HIT EMPLOYEES RIGHT ELBOW.

EMPLOYEE WAS CUTTING HOSE FOR WATER SPOUT WITH KNIFE THE BLADE FOLDED CLESED AS HE WAS CUTTING THE HOSE AND CUT HIS MIDDLE FINGER ON HIS RIGHT HAND