Mining Incidents
Search Operators Mines Alerts Research Controllers Fatalgrams About
English Español
← Back to search

Rockhampton #1: 13 MSHA citations Coal

Controlled by Emily Rabnott
Kettle, Island, Bell County, KY  ·  Abandoned
MSHA Mine ID: 1519592

Rockhampton #1 has $1K in proposed MSHA penalties and $0 outstanding across 0 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at Rockhampton #1.

Fatalities
0
Total incidents
0
Years on record
—
Latest incident
—
Compliance record
MSHA citations since 2012
13
citations
3
significant & substantial
$1,324
proposed penalties
$1,324
paid to date
100% of proposed penalties paid to date, a $0 gap.
Source: MSHA violations data, updated weekly.
See Rockhampton Energy LLC's full MSHA compliance history →
Inspection activity
MSHA inspections since 2011
7
inspections on record
117
inspection hours
n/a
citations per 100 inspection hours
ⓘ This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 117 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.

Rockhampton #1 has $1K in proposed MSHA penalties and $0 outstanding across 0 contested dockets.

Penalty disposition
ⓘ Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$1K
proposed penalties
$1K
current assessed
$1K
paid to date
$0
outstanding
13 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2013-08-20.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
ⓘ Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
23.1%
significant & substantial
0.0%
high negligence or reckless
23.1%
reasonably likely or greater
23.1%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 0.0% low, 100.0% moderate, 0.0% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.

MSHA sampling at Rockhampton #1 shows 100% of 5 respirable coal dust samples met the 1.5 mg/m3 standard.

Health sampling
ⓘ A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Respirable coal dust
ⓘ Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.

Last sampled: 2012-02-03, 14 years ago
100%
within 1.5 mg/m3
5
samples
0.29
dust max (mg/m3)
5 samples taken by MSHA inspectors, 0 by the operator.
Most-sampled occupations
  • BULLDOZER OPERATOR2
  • BACKHOE OPERATOR1
  • HIGHLIFT OPERATOR/FRONT END LOADER1

Silica (quartz)

Last sampled: 2012-02-09, 14 years ago
35.5
silica avg (%)
1
samples
35.5
silica max (%)
Most-sampled occupations
  • BULLDOZER OPERATOR1
See US coal mines ranked by silica in their dust samples.

Noise
ⓘ The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.

Last sampled: 2012-02-03, 14 years ago
0%
over PEL
5
samples
Most-sampled occupations
  • BULLDOZER OPERATOR2
  • BACKHOE OPERATOR1
  • HIGHLIFT OPERATOR/FRONT END LOADER1
See US mines ranked by noise samples over the legal limit.
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.

Rockhampton #1 recorded 0.00 reportable injury cases per 100 full-time workers in 2012.

Injury rate, 2012
ⓘ This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
No reportable injury cases in any year shown. Employee-hours were reported in each of those years, so these are true zeros rather than missing data. Citations, listed in the compliance record above, are inspector-found violations and are counted separately from worker injuries.
Below average. The US coal mining average was 3.74 and the all-US-mining average was 2.96 cases per 100 workers.
In Kentucky, coal mining averaged 4.35 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
  1. M&G Mining, LLC 2011 to 2011
  2. Rockhampton Energy LLC 2011 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
ⓘ Coal production is reported quarterly and lags the current period; the most recent quarters may be incomplete.
Year Employees Coal produced (tons)
2013 17
2012 20 32,943
2011 15 4,911
Source: MSHA quarterly employment and production, updated weekly.

Rockhampton #1 sits in Bell County, Kentucky, where the Census mining category is 3.6% of county employment.

Local economic context
ⓘ County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Bell County, Kentucky · Population 23,878
3.6%
Mining share of county employment
$32,403
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
ⓘ Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2013 Q3 10,228 1 0 97.8
2013 Q2 10,134 0 0 0.0
2013 Q1 8,755 0 0 0.0
2012 Q4 8,274 0 0 0.0
2012 Q3 8,124 0 0 0.0
2012 Q2 11,183 0 0 0.0
2012 Q1 16,869 10 3 592.8
2011 Q4 8,354 0 0 0.0

No reportable incidents on file.

MSHA has no recorded reportable accidents for this mine in the current dataset. New reports appear here within a week of being filed.