Rockville Shop Metal/Non-Metal

Employee was walking on rough uneven surface in the yard around the shop, stepped in a hole and twisted right knee. Sought medical treatment, was not on restrictions. On 7-13-07 had arthroscopic surgery - returned to work on 7-16-07. No lost time.

Employee was walking from front of trailer to back, welding up cracks, and stepped on axle, slipped, twisting left knee. Employee was released to work, no lost time. Is doing some extensive physical therapy.

Employee opened big sliding door in the quonset and got his right little finger in between the door and the door stop, cutting it. Right 5th finger laceration, sutures. Employee was temporarily working at Shop as Quarry was closed for winter months.

EE was torqueing a side bolt on a doofer hammer, strained right arm. EE didn't see a doctor right away because EE thought it would get better. When EE saw the doctor on 3/30/05, EE received a prescription and also referred for some therapy. EE is still working - no lost time.

Employee was measuring for some plumbing work on a grove crane, when he sat up he felt pain in his back.

EE WAS MAKING REPAIR TO A DUST COLLECTOR. THE MUFFLER MOVED AND THE HAMMER THE EE WAS USING GLANCED OFF THE MUFFLER AND HIT HIS LEFT LITTLE FINGER, CUTTING IT AND REQUIRING SUTURES.

EE WAS USING A CUTTING TORCH TO CUT OFF A DRILL STEEL, FOREIGN BODY FLEW UP AND BURNED THE OUTSIDE OF HIS LEFT EAR. EE DIDN'T SEE A DOCTOR UNTIL 11/10/03.

EE WAS MAKING LABELS AND A BUG FLEW UNDER HIS SAFETY GLASSES AND STUNG HIM IN THE LEFT EYE.

EE WAS WELDING IN THE BED OF A GROUT TRUCK BOX WHEN HE WAS FLASHED FROM THE AUTOMATIC TRACK WELDER, CAUSING FLASH BURNS TO BOTH EYES. HE SAW DR. ON 5-7-03, THEN TOLD HIS SUPERVISOR ABOUT IT LA TER. DR. SAID HE COULD WITH NO RESTRICTIONS BEGINNING 5-12-03.

EMPLOYEE WAS SITTING ON CHAIR WELDING A DOG BOX (ABOUT A 300# PIECE OF STEEL) THAT WAS SITTING ON HORSES. DOG BOX FELL OFF HORSES AND FELL ON VERY TIP OF HIS RIGHT FOOT, FRACTURING TWO TOES.

EMPLOYEE WAS SLIDING A 1'METAL PLATE IN PLACE ON A 475 MICHIGAN LOADER BUCKET. THE PLATE SLIPPED AND SMASHED THE FINGER IN BETWEEN, REQUIRING SUTURES.

EE WAS WORKING ON MICHIGAN LOADER, PUTTING ON LOWER RADIATOR HOSE. HE STOOD UP, CATCHING HIS EAR ON THE HEATER SHUT OFF VALVE, CUTTING THE LEFT EAR LOBE. HIS EAR WAS TREATED WITH DERMABOND.

EE WAS REPAIRING A REAR PLANITARY GEAR SET AND ASMALL PIECE OF WIRE WENT INTO THE PALM OF HIS LEFT HAND.

EE WAS PUTTING AWAY CYLINDES AND OTHER ITEMS, LOWER BACK INJURY. COLD SPRING GRANITE DID NOT KNOW EE WAS SEEING A CHIROPRACTOR UNTIL 2-18-02.

EE WAS REMOVING A FRONT DRIVE SHAFT FROM 475C LOADER, CUT RIGHT THUMB REQUIRING SUTURES.

EE WAS GRINDING ON METAL ON BACKHOE BUCKET AND APIECE OF METAL ENTERED UNDER HIS SAFETY GLASSES AND GOT STUCK IN LEFT EYE. HE DIDN'T SEE A DOCTOR UNTIL 4/24/01.

EE WAS WORKING ON GROUT TRUCK AND PRYING WITH A PRY BAR. HE STRAINED/SPRAINED HIS RIGHT WRIST. HE DID NOT PAY MUCH ATTENTION TO IT AT FIRST BUT IT CONTINUED TO BOTHER HIM SO HE WENT TO THE DR ON 1-24-01.

EE WAS PRESSURE WASHING BACKHOE TRACKS OFF TO SEND BACKHOE IN FOR REPAIRS. WASH SPRAYED GRAVEL BACK INTO HIS MOUTH. HE BIT DOWN ON GRAVEL AND BROKE/CRACKED HIS TOOTH ON THE BOTTOM LEFT SIDE OF HIS MOUTH.

EMPLOYEE WAS WORKING ON A SLOT DRILL HITTING A PUNCH WITH A HAMMER. A PIECE OF THE PUNCH BROKE OFF AND WENT INTO HIS LEFT PALM.

EMPLOYEE WAS GRINDING BURRS OFF SEAM WEDGES WITH A BENCH GRINDER. HE WAS APPLYING PRESSURE TO THE WEDGE, IT SLIPPED OFF GRINDING WHEEL AND WHEEL CUT TOP OF HIS LEFT HAND, REQUIRING STITCHES.

EE WAS POUNDING SOME ANCHORS INTO A BLOCK OF GRANITE TO SECURE A FENCE. HE SLIPPED WITH THE HAMMER AND HIT HIS LEFT MIDDLE FINGER, FRACTURING IT.

EE WAS MOVING WIRE SAW WEDGE STEEL FROM CART RACK TO HORSES FOR FURNACE OPERATION, WHEN HE STUMBLED AND PINCHED THUMB BETWEEN METAL IN HIS HAND AND METAL ON CART. HE CUT HIS RIGHT THUMB/ POSSI BLE FRACTURE.

EMPLOYEE WAS CUTIING A PLASTIC LINKAGE WITH UTILITY KNIFE, IT SLIPPED AND CUT HIS LEFT INDEX FINGER.

EE WAS PICKING UP RAILROAD TIE PLATES AND THROWING THEM INTO IRON SKIP, HE NOTICED PAIN IN HIS LOWER BACK

EMPLOYEE WAS GRINDING A PIECE OF CHANNEL IRON ON BENCH GRINDER. AS HE SWEPT ACROSS GRINDING WHEEL, HE WENT TO FAR AND IRON WENT PAST WHEEL, LEAVING HIS FINGER COME IN CONTACT WITH GRINDING WHE EL. LACERATION TO RIGHT INDEX FINGER, SUTURES, TETANUS.

EE WAS WAITING FOR A CRANE TO MOVE A BEAM, THE BEAM SWUNG TOWARDS HIM. HE TRIED TO STOP IT WITH HIS LEFT HAND, SMASHED HIS FINGER BETWEEN THE BEAM AND DRILL PRESS. HE CUT HIS LEFT MIDDLE FINGE R, REQUIRING 2 SUTURES.

EMPLOYEE WAS CHANGIGN ENGINE IN LOADER, GOT FOREIGN BODY IN HIS RIGHT EYE.

EE WAS PUTTING HYDRAULIC PUMP DRIVE SHAFT INTO GROUT TRUCK AT MORTON. SHAFT SLIPPED OUT OF HANDS, HITTING EE IN THE TEETH AND CHIPPING BOTH FRONT UPPER TEETH.

EMPLOYEE WAS LAYING ON CREEPER, TIGHTENING BOLTS ON CASE I-H, PULLING HARD ON RATCHET WHEN SOCKET SLIPPED OFF HEAD. THE RATCHET HIT EMPLOYEE IN MOUTH AND BROKE OFF 7TH TOOTH ON TOP JAW.

EMPLOYEE WAS TAKING WIRE SAW WHEEL OFF OF TABLE.IT SLIPPED AND EMPLOYEE GRABBED AT IT,CAUSING STRAIN TO MID-SECTION.EMPLOYEE WENT TO DOCTOR ON 05-31-94 BECAUSE IT CONTINUED TO BOTHER HIM.

EMPLOYEE'S DOCTOR SAID HE HAD CARPAL TUNNEL DUE TO WELDING.

EMPLOYEE DOESN'T RECALL ANY SPECIFIC INCIDENT. HE WAS DIAGNOSISED WITH FOREIGN BODY IN RIGHT EYE.

24955D WHILE USING OXYGEN TORCH.

THE EMPLOYEE WAS USING A HAMMER AND CHISEL WHEN THE CHISEL SLIPPED OUT OF HIS HAND CAUSING HIM TO HIT THE TRANSMISSION CASE. LACERATION TO LEFT PALM AND THUMB.

THE EMPLOYEE WAS PULLING 475-B TILT ARM OFF OF FORK LIFT TRUCK WHEN HE TWISTED HIS LEFT FOOT. CONTUSION TO THE LEFT LITTLE TOE.

EMPLOYEE SLIPPED ON WET FLOOR CAUSING HIS RIGHT KNEE TO BE TWISTED OUTWARDS.

THE EMPLOYEE CAME IN CONTACT WITH POISON IVEY WHILE INSTALLING A CHAIN LINK FENCE.

SLIPPED ON WET GRASS WHILE ROLLING UP ELECTRICAL CORD AND FELL ON TO STONE HITTING RIGHT SIDE OF BACK.

WIRE ROD PUNCTU9ED HAND BETWEEN INDEX FINGER.

CUT CENTER OF F2REHEAD.

PINCHED FINGER 3N HYDRAULIC RAM

EE WAS ASSISTING IN THREADING OF DRILL STEEL BY HOLDING ONTO THE END OF A 16\ PIECE OF DRILL STEEL WHILE THE OTHER END WAS BEING THREADED. AS THE STEEL WAS TURNING IT CAUGHT THE EES GLOVES & B EGAN ROTATING THE EE ALSO.

EMP WAS HITTING A CHIESEL WITH A HAMMER WHEN PIECE OF STEEL FLEW OFF EMBEDING ITSELF IN EMPLOYEES RT ARM

EMPLOYEE WAS HOLDING GUIDE ROPE WITH PRY BAR, BAR SLIPPED AND ROPE STRUCK HIM IN THE GROIN.

WIRE FLEW FROM WIRE BRUSH AND EMBEDDED IN LEG