Mining Incidents

SHELBY CRUSHED STONE INC: 137 MSHA citations Metal/Non-Metal

Controlled by Thomas S Biamonte
Medina, Orleans County, NY  ·  Active
MSHA Mine ID: 3002633

SHELBY CRUSHED STONE INC has $21K in proposed MSHA penalties and $0 outstanding across 1 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at SHELBY CRUSHED STONE INC.

Fatalities
0
Total incidents
25
Years on record
1987–2024
Latest incident
Oct 2024
Compliance record
MSHA citations since 2000
137
citations
22
significant & substantial
$20,625
proposed penalties
$20,625
paid to date
100% of proposed penalties paid to date, a $0 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2000
59
inspections on record
1,111
inspection hours
12.3
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
137 citations across 1,111 inspection hours.
Source: MSHA inspections data, updated weekly.
Imminent-danger orders
A Section 107(a) order removes miners from an area when an inspector finds an imminent danger. Each order is lifted once the condition is corrected, so this counts orders issued, not orders now in effect.
1
Section 107(a) orders
Most recent order: 2024-12-30.
On record since 2024.
Source: MSHA imminent-danger order records, updated weekly.

SHELBY CRUSHED STONE INC has $21K in proposed MSHA penalties and $0 outstanding across 1 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$21K
proposed penalties
$21K
current assessed
$21K
paid to date
$0
outstanding
133 assessments are final orders; 1 contested dockets.
Of $138 in penalties contested before the Commission, $0 was upheld in final decisions.
As of the most recent assessment on 2026-02-19.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
16.2%
significant & substantial
2.9%
high negligence or reckless
16.2%
reasonably likely or greater
52.2%
permanently disabling or fatal if injury occurs
Negligence coding: 0.7% none, 31.6% low, 64.7% moderate, 2.9% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
When citations were contested
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
1 citations taken to the federal commission · 1% of citations on record
  • Vacated or withdrawn 1 · 100%
0%
S&S designation survived the contest
Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.
of 1 decided S&S contests · industry: 79%
100%
Penalty reduction in decided contests
$138 proposed, $0 after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2015-10-27.
Contested penalties
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this mine contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
Docket Decision Judge Year Proposed / upheld
YORK 2016-0024 Withdrawal Paez 2016 $138 → $0
Source: FMSHRC civil penalty dockets and decisions (public record), updated weekly.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2026-02-20
12%
of limit-tested samples over the exposure limit
25
samples
17
limit-tested
Most sampled contaminants
  • Quartz, respirable, >1% Qtz192 over
  • Respirable dust, <.1mg4
  • Arsenic fumes1
  • Beryllium fumes1
Show the individual readings (37)
Date Contaminant Concentration Limit Conc / limit Occupation
2015-06-17 Quartz, respirable, >1% Qtz 1.25 1.14 1.10 Cleanup Man
2015-06-17 Quartz, respirable, >1% Qtz 4.13 1.25 3.30 Dry Screen Plant Operator
2026-02-20 Arsenic fumes 0 1500 0.00 Utility Man
2026-02-20 Zinc oxide fumes 0 10 0.00 Utility Man
2026-02-20 Vanadium fumes 0 50 0.00 Utility Man
2026-02-20 Nickel fumes 0 3 0.00 Utility Man
2026-02-20 Molybdenum fumes 0 20 0.00 Utility Man
2026-02-20 Manganese fumes 0.02 5 0.00 Utility Man
2026-02-20 Magnesium oxide fumes 0.18 20 0.01 Utility Man
2026-02-20 Lead fumes 0 450 0.00 Utility Man
2026-02-20 Iron oxide fumes 0.37 20 0.02 Utility Man
2026-02-20 Copper fumes 0 300 0.00 Utility Man
2026-02-20 Cobalt fumes 0 300 0.00 Utility Man
2026-02-20 Chromium, insoluble 0 3 0.00 Utility Man
2026-02-20 Cadmium oxide fumes 0 100 0.00 Utility Man
2026-02-20 Beryllium fumes 0 6 0.00 Utility Man
2025-06-25 Quartz, respirable, >1% Qtz 0.32 1.22 0.26 Laborer, Bullgang
2025-06-25 Quartz, respirable, >1% Qtz 0.3 1.28 0.23 Crusher Oper/Worker
2023-06-27 Quartz, respirable, >1% Qtz 0.14 Crusher Oper/Worker
2020-10-07 Respirable dust, <.1mg 0 Front-end Loader Operator
2020-10-07 Quartz, respirable, >1% Qtz 0.15 Crusher Oper/Worker
2020-10-07 Respirable dust, <.1mg 0 Truck Driver
2020-10-07 Quartz, respirable, >1% Qtz 0.18 Crusher Oper/Worker
2018-06-13 Respirable dust, <.1mg 0 Laborer, Bullgang
2018-06-13 Quartz, respirable, >1% Qtz 0.29 Truck Driver
2018-06-13 Quartz, respirable, >1% Qtz 0.33 0.95 0.35 Crusher Oper/Worker
2015-08-06 Quartz, respirable, >1% Qtz 0.61 1.19 0.51 Crusher Oper/Worker
2015-06-17 Quartz, respirable, >1% Qtz 0.39 1.64 0.24 Truck Driver
2015-06-17 Quartz, respirable, >1% Qtz 0.3 1.03 0.29 Truck Driver
2013-09-18 Quartz, respirable, >1% Qtz 0.77 3.22 0.24 Cleanup Man
2013-09-18 Quartz, respirable, >1% Qtz 0.27 1.05 0.26 Cleanup Man
2007-10-03 Quartz, respirable, >1% Qtz 0.86 1.08 0.80 Crusher Oper/Worker
2005-10-19 Quartz, respirable, >1% Qtz 0.26 1.17 0.22 Truck Driver
2005-10-19 Respirable dust, <.1mg 0 Crusher Oper/Worker
2005-10-19 Quartz, respirable, >1% Qtz 0.18 0.96 0.19 Laborer, Bullgang
2005-10-19 Quartz, respirable, >1% Qtz 0.22 1.71 0.13 Truck Driver
2005-10-19 Quartz, respirable, >1% Qtz 0.14 1.29 0.11 Shovel Operator
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.

SHELBY CRUSHED STONE INC recorded 0.00 reportable injury cases per 100 full-time workers in 2025.

Injury rate, 2025
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
Below average. The US metal and nonmetal mining average was 1.65 and the all-US-mining average was 1.97 cases per 100 workers.
In New York, metal and nonmetal mining averaged 2.08 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2025 * 0.00 0.00 0.000
2024 * 8.33 0.00 0.000
2023 * 8.08 8.08 0.000
2022 * 0.00 0.00 0.000
2021 * 0.00 0.00 0.000
2020 * 0.00 0.00 0.000
2019 * 6.77 0.00 0.000
2018 * 8.19 0.00 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
  1. Shelby Crushed Stone Products Inc 1984 to 2005
  2. Shelby Crushed Stone Inc 2005 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year Employees
2026 10
2025 10
2024 10
2023 10
2022 11
2021 11
2020 10
2019 12
2018 11
2017 13
2016 14
2015 18
2014 21
2013 17
2012 21
2011 19
2010 19
2009 18
2008 15
2007 18
2006 17
2005 15
2004 16
2003 14
2002 19
2001 19
2000 19
Source: MSHA quarterly employment and production, updated weekly.

SHELBY CRUSHED STONE INC sits in Orleans County, New York, where the Census mining category is 0.3% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Orleans County, New York · Population 39,686
0.3%
Mining share of county employment
$63,838
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2026 Q2 7,236 0 0 0.0
2026 Q1 5,743 1 0 174.1
2025 Q4 6,758 0 0 0.0
2025 Q3 7,431 0 0 0.0
2025 Q2 6,836 2 0 292.6
2025 Q1 4,295 0 0 0.0
2024 Q4 6,157 11 3 1786.6
2024 Q3 7,366 3 0 407.3
Show 97 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2024 Q2 6,354 0 0 0.0
2024 Q1 4,128 0 0 0.0
2023 Q4 6,222 3 1 482.2
2023 Q3 6,588 0 0 0.0
2023 Q2 7,096 11 0 1550.2
2023 Q1 4,861 0 0 0.0
2022 Q4 6,311 0 0 0.0
2022 Q3 7,386 0 0 0.0
2022 Q2 7,416 5 1 674.2
2022 Q1 5,529 0 0 0.0
2021 Q4 6,969 0 0 0.0
2021 Q3 8,172 0 0 0.0
2021 Q2 6,822 1 1 146.6
2021 Q1 3,923 0 0 0.0
2020 Q4 5,965 10 0 1676.4
2020 Q3 6,938 0 0 0.0
2020 Q2 6,062 1 0 165.0
2020 Q1 3,751 0 0 0.0
2019 Q4 6,515 1 0 153.5
2019 Q3 8,566 0 0 0.0
2019 Q2 8,949 4 1 447.0
2019 Q1 5,508 1 0 181.6
2018 Q4 6,734 0 0 0.0
2018 Q3 7,782 0 0 0.0
2018 Q2 6,106 1 0 163.8
2018 Q1 3,799 0 0 0.0
2017 Q4 7,248 0 0 0.0
2017 Q3 9,234 5 3 541.5
2017 Q2 8,109 0 0 0.0
2017 Q1 5,330 0 0 0.0
2016 Q4 7,234 0 0 0.0
2016 Q3 9,713 0 0 0.0
2016 Q2 9,120 3 0 328.9
2016 Q1 5,013 3 0 598.4
2015 Q4 10,309 0 0 0.0
2015 Q3 10,966 0 0 0.0
2015 Q2 9,837 3 0 305.0
2015 Q1 5,802 0 0 0.0
2014 Q4 9,920 1 0 100.8
2014 Q3 11,813 0 0 0.0
2014 Q2 9,385 0 0 0.0
2014 Q1 5,337 3 1 562.1
2013 Q4 8,575 0 0 0.0
2013 Q3 10,958 5 1 456.3
2013 Q2 9,026 2 0 221.6
2013 Q1 5,677 5 1 880.7
2012 Q4 10,081 0 0 0.0
2012 Q3 12,052 0 0 0.0
2012 Q2 12,012 0 0 0.0
2012 Q1 7,916 0 0 0.0
2011 Q4 11,330 3 0 264.8
2011 Q3 13,570 0 0 0.0
2011 Q2 10,368 10 1 964.5
2011 Q1 5,085 0 0 0.0
2010 Q4 10,042 0 0 0.0
2010 Q3 13,508 0 0 0.0
2010 Q2 11,652 0 0 0.0
2010 Q1 4,190 0 0 0.0
2009 Q4 10,620 0 0 0.0
2009 Q3 10,825 6 2 554.3
2009 Q2 9,211 0 0 0.0
2009 Q1 3,165 0 0 0.0
2008 Q4 6,807 1 1 146.9
2008 Q3 8,488 0 0 0.0
2008 Q2 8,914 0 0 0.0
2008 Q1 4,125 0 0 0.0
2007 Q4 8,755 1 0 114.2
2007 Q3 11,128 0 0 0.0
2007 Q2 11,117 10 0 899.5
2007 Q1 6,914 0 0 0.0
2006 Q4 10,514 0 0 0.0
2006 Q3 10,925 0 0 0.0
2006 Q2 9,961 0 0 0.0
2006 Q1 4,958 0 0 0.0
2005 Q4 8,622 5 1 579.9
2005 Q3 9,708 0 0 0.0
2005 Q2 6,793 0 0 0.0
2005 Q1 2,670 0 0 0.0
2004 Q4 5,244 0 0 0.0
2004 Q3 8,631 0 0 0.0
2004 Q2 8,167 0 0 0.0
2004 Q1 3,127 0 0 0.0
2003 Q4 5,737 1 0 174.3
2003 Q3 8,755 0 0 0.0
2003 Q2 5,139 0 0 0.0
2003 Q1 3,032 0 0 0.0
2002 Q4 5,874 0 0 0.0
2002 Q3 10,375 0 0 0.0
2002 Q2 7,512 2 0 266.2
2002 Q1 3,864 0 0 0.0
2001 Q4 6,745 0 0 0.0
2001 Q3 8,755 4 2 456.9
2001 Q2 8,271 0 0 0.0
2001 Q1 3,726 0 0 0.0
2000 Q4 6,471 0 0 0.0
2000 Q2 9,016 0 0 0.0
2000 Q1 4,098 0 0 0.0
No fatalities recorded at this mine.

Reportable incidents

25 on file

2024 · 1 incident

October 8, 2024 NY · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator HANDTOOLS (NONPOWERED)
Shelby Crushed Stone Inc · Struck by... (Not Elsewhere Classified)

Employee cutting rubber belt with a razor knife. Slipped and cut left hand.

2023 · 1 incident

September 6, 2023 NY · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman STEPPING OR KNEELING ON OBJECT
Shelby Crushed Stone Inc · Over-exertion (Not Elsewhere Classified)

Employee stepped on a rock while stepping down to platform and twisted ankle.

2019 · 1 incident

September 3, 2019 NY · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator SLIP OR FALL OF PERSON
Shelby Crushed Stone Inc · Fall to the walkway or working surface

Employee alleges that EE slipped in mud from recent rain and fell to ground. Injury to right knee.

2018 · 1 incident

November 13, 2018 NY · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman MACHINERY
Shelby Crushed Stone Inc · Caught in, under or between a moving and a stationary object

Two employees working together to prepare a lift with an electric come-along. Injured employee guiding body of come-along to position the lift. Employee advised the control operator to lower the chain. The control operator in error lifted the chain causing right hand of other employee to get caught in a pinch point. Hand caught between chain/body of come-along. Rec'd 5 sutures.

2015 · 1 incident

December 17, 2015 NY · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDLING OF MATERIALS
Shelby Crushed Stone Inc · Caught in, under or between (Not Elsewhere Classified)

Laborer assisting mechanic removing a heavy pin (4-3/8 inch dia. by approx. 12 inches long) from the mast joint socket. While removing pin, it had shifted and caught the right hand between the middle and ring finger in a pinch point against the fender of the loader causing a laceration requiring 5 stitches to the hand. Return to work same day no limitations.

2012 · 2 incidents

July 10, 2012 NY · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer STEPPING OR KNEELING ON OBJECT
Shelby Crushed Stone Inc · Struck against stationary object

The employee was exiting the Cat 235 excavator and he alleges that as he stepped off the machine he stepped on a rock and fell to the ground

July 2, 2012 NY · Metal/Non-Metal ledgeman/hand, quarry man HANDTOOLS (NONPOWERED)
Shelby Crushed Stone Inc · Over-exertion (Not Elsewhere Classified)

Syntron feeder jammed, employee used pry bar to loosen rock, allegedly pry bar jammed and jerked employee as he held bar.

2008 · 1 incident

October 21, 2008 NY · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator SLIP OR FALL OF PERSON
Shelby Crushed Stone Inc · Fall from machine

Employee alledgedly lost footing getting out of back of service truck and injured his knee.

2006 · 1 incident

October 6, 2006 NY · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator MACHINERY
Shelby Crushed Stone Inc · Caught in, under or between running or meshing objects

While removing drive belts from primary feeder, pinched finger between motor pulley & belts.

2003 · 1 incident

2001 · 1 incident

July 16, 2001 NY · Metal/Non-Metal backhoe operator, trackhoe operator, crane operator MACHINERY
Shelby Crushed Stone Products Inc · Struck by falling object

OPERATOR PICKING ROCK FROM FACE WITH CAT FRONT SHOVEL STONE BOUNCED DOWN BOOM AND INTO CAB BROKE WINDOWS IN EQUIPMENT INJURED LEGS OF OPERATOR.

1998 · 2 incidents

November 11, 1998 NY · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDLING OF MATERIALS
Shelby Crushed Stone Products Inc · Over-exertion in lifting objects

SUPERVISOR INSTRUCTED GROUP TO GET A MACHANICAL LIFT AND MOVE ELECTRIC CHAIN FALL. EMPLOYEE ON HIS OWN INITIATIVE LIFTED CHAIN FALL, THREW IT OVER HIS SHOULDER, AND CARRIED IT OVER TO THE BEN CH AND SET IT DOWN. HE ALLEGES HIS BACK POPPED WHEN HE SET CHAIN FALL DOWN ON THE BENCH. WE HAVE FILED THIS REPORT UNDER PROTEST. EMPLOYEE NEVER MENTIONED INJURY UNTIL 1:40PM. WHEN HE ASKED

November 4, 1998 NY · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver HANDLING OF MATERIALS
Shelby Crushed Stone Products Inc · Caught in, under or between running or meshing objects

EE ENTERED SURGE TUNNEL, REMOVED GUARD FROM TAILPULLEY AREA TO REMOVE ROCKS & GOT HAND PINCHED BY BELT. LOST TIP OF RIGHT RING FINGER.

1995 · 1 incident

1992 · 1 incident

June 4, 1992 NY · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator POWERED HAULAGE
Shelby Crushed Stone Products Inc · Struck by flying object

JAW OPERATOR DUMPING TRUCK INTO FEEDER SMALL ROCK CHIP DID 90 DEG TURN WENT INSIDE SHED WHERE OPERATOR WAS STANDING AND HIT EMPL IN HEAD.

1991 · 4 incidents

December 13, 1991 NY · Metal/Non-Metal belt foreman, maintenance foreman, maintenance supervisor OTHER
Shelby Crushed Stone Products Inc · Bodily reaction, (Not Elsewhere Classified)

EE WAS CROUCHING DOWN TO INSPECT MACHINERY AND BACK GAVE OUT. THIS IS A REOCCURANCE OF PREVIOUS BACK PROBLEMS.

November 1, 1991 NY · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator HANDLING OF MATERIALS
Shelby Crushed Stone Products Inc · Struck by flying object

EMPLOYEE WAS TRYING TO REMOVE CAP FROM FUEL TANK ON 1500 TROJAN LOADER. THE CAP WAS ON TOO TIGHT AND WHEN HE FINALLY LOOSENED IT UP, IT FLEW OFF AND HIT HIS LEFT HAND.

August 30, 1991 NY · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator HANDLING OF MATERIALS
Shelby Crushed Stone Products Inc · Struck against stationary object

EMPLOYEE WAS MOVE PIECE OF SCREEN CLOTH & SNAGGED EDGE ON LEG

1990 · 1 incident

October 31, 1990 NY · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator POWERED HAULAGE
Shelby Crushed Stone Products Inc · Caught in, under or between a moving and a stationary object

MAN TRYING TO DISLODGE ROCK FROM CRUSHER OPENING. HE HAD CABLE HOOKED TO TRUCK ON ONE ENDING ROCK ON THE OTHER. ROCK SHIFTED TIGHTENING CABLE TRAPPING MANS LEG AGAINST GRIZZLY.

1989 · 1 incident

1988 · 2 incidents

November 4, 1988 NY · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator HANDTOOLS (NONPOWERED)
Shelby Crushed Stone Products Inc · Caught in, under or between a moving and a stationary object

TRYING TO UNPLUG CHUTE AND SMASHED FINGER BETWEEN RAILING AND PRY BAR.

October 25, 1988 NY · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDTOOLS (NONPOWERED)
Shelby Crushed Stone Products Inc · Struck by... (Not Elsewhere Classified)

EMPLOYEE WAS CLEANING OUT HOPPER UNDER AUGER AND HIT HAND WITH HAMMER.

1987 · 2 incidents

September 19, 1987 NY · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman SLIP OR FALL OF PERSON
Shelby Crushed Stone Products Inc · Fall from scaffolds, walkways, platforms

EMPLOYEE SLIPPE8 ON WET WALKWAY AND FELL APPROX. 2 1/2'. WALKWAY WAS WET FROM RAIN THE NIGHT BEGFORE. BRUISED AND SPRAINED LEFT KNEE AND SHIN.