Mining Incidents

Silverton Stripping: 45 MSHA citations Coal

Controlled by John W Rich
Branch Twp., Schuylkill County, PA  ·  Abandoned
MSHA Mine ID: 3608613

Silverton Stripping has $4K in proposed MSHA penalties and $0 outstanding across 0 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at Silverton Stripping.

Fatalities
0
Total incidents
1
Years on record
2005
Latest incident
Mar 2005
Compliance record
MSHA citations since 2000
45
citations
14
significant & substantial
$3,937
proposed penalties
$3,937
paid to date
100% of proposed penalties paid to date, a $0 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2000
66
inspections on record
1,734
inspection hours
2.6
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
45 citations across 1,734 inspection hours.
Source: MSHA inspections data, updated weekly.

Silverton Stripping has $4K in proposed MSHA penalties and $0 outstanding across 0 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$4K
proposed penalties
$4K
current assessed
$4K
paid to date
$0
outstanding
45 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2016-05-18.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
31.1%
significant & substantial
0.0%
high negligence or reckless
33.3%
reasonably likely or greater
13.3%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 22.2% low, 77.8% moderate, 0.0% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.

MSHA sampling at Silverton Stripping shows 100% of 101 respirable coal dust samples met the 1.5 mg/m3 standard.

Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Respirable coal dust
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.

Last sampled: 2016-05-09, 10 years ago
100%
within 1.5 mg/m3
101
samples
1.11
dust max (mg/m3)
0
over MSHA ECV
The excessive concentration value (ECV) is MSHA's own per-sample enforcement threshold, which builds in measurement uncertainty; a sample over its ECV can trigger a citation. The count covers only samples MSHA assigned an ECV.
99 samples taken by MSHA inspectors, 2 by the operator.
Most-sampled occupations
  • CRANE OPER/DRAGLINE OPERATOR36
  • HIGHLIFT OPERATOR/FRONT END LOADER31
  • BULLDOZER OPERATOR11

Silica (quartz)

Last sampled: 2007-03-26, 19 years ago
15.8
silica avg (%)
4
samples
25.9
silica max (%)
Most-sampled occupations
  • BULLDOZER OPERATOR2
  • HIGHLIFT OPERATOR/FRONT END LOADER1
  • REFUSE TRUCK DRIVER/BACKFILL TRUCK DRIVE1

Noise
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.

Last sampled: 2016-05-18, 10 years ago
0%
over PEL
64
samples
Most-sampled occupations
  • CRANE OPER/DRAGLINE OPERATOR23
  • HIGHLIFT OPERATOR/FRONT END LOADER21
  • BULLDOZER OPERATOR6
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.
Health sampling trend
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.
Respirable coal dust by year
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.
Year within 1.5 mg/m3 samples
2016 100% 1
2015 100% 5
2014 100% 2
2013 100% 6
2012 100% 6
2011 100% 7
2010 100% 10
2009 100% 3
2008 100% 8
2007 100% 9
2006 100% 8
2005 100% 5
2004 100% 9
2003 100% 3
2002 100% 4
2001 100% 8
2000 100% 7
Silica (quartz) by year
Year silica avg (%) samples
2007 25.9 1
2004 6.8 1
2002 9.2 1
2000 21.3 1
Noise by year
Year over PEL samples
2016 0% 1
2015 0% 2
2013 0% 4
2012 0% 3
2011 0% 8
2010 0% 6
2009 0% 3
2008 0% 4
2007 0% 4
2006 0% 4
2005 0% 2
2003 0% 5
2002 0% 4
2001 0% 6
2000 0% 8
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.

Silverton Stripping recorded 0.00 reportable injury cases per 100 full-time workers in 2001.

Injury rate, 2001
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
No reportable injury cases in any year shown. Employee-hours were reported in each of those years, so these are true zeros rather than missing data. Citations, listed in the compliance record above, are inspector-found violations and are counted separately from worker injuries.
Below average. The US coal mining average was 6.94 and the all-US-mining average was 5.26 cases per 100 workers.
In Pennsylvania, coal mining averaged 7.64 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2001 * 0.00 0.00 0.000
2000 * 0.00 0.00 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
  1. Selkirk Mining Company 1997 to 2005
  2. Selkirk Enterprises LLC 2005 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Coal production is reported quarterly and lags the current period; the most recent quarters may be incomplete.
Year Employees Coal produced (tons)
2022 0
2021 0
2020 0
2019 1
2018 2 8,718
2017 0 3,861
2016 1 21,678
2015 1 17,219
2014 2 4,748
2013 2 32,633
2012 2 44,866
2011 2 44,544
2010 2 34,529
2009 2 36,480
2008 3 49,422
2007 4 53,660
2006 5 55,447
2005 5 29,582
2004 8 40,688
2003 6 32,180
2002 6 31,722
2001 10 38,125
2000 8 38,374
Source: MSHA quarterly employment and production, updated weekly.

Silverton Stripping sits in Schuylkill County, Pennsylvania, where the Census mining category is 1.1% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Schuylkill County, Pennsylvania · Population 143,259
1.1%
Mining share of county employment
$66,901
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2022 Q1 0 0 0
2021 Q4 0 0 0
2021 Q3 0 0 0
2021 Q2 0 0 0
2021 Q1 0 0 0
2020 Q4 0 0 0
2020 Q3 0 0 0
2020 Q2 0 0 0
Show 81 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2020 Q1 0 0 0
2019 Q4 0 0 0
2019 Q3 0 0 0
2019 Q2 0 0 0
2019 Q1 160 0 0 0.0
2018 Q4 160 0 0 0.0
2018 Q3 200 0 0 0.0
2018 Q2 302 0 0 0.0
2018 Q1 165 0 0 0.0
2017 Q4 0 0 0
2017 Q3 0 0 0
2017 Q2 0 0 0
2017 Q1 569 0 0 0.0
2016 Q4 502 0 0 0.0
2016 Q3 476 0 0 0.0
2016 Q2 522 1 0 1915.7
2016 Q1 576 0 0 0.0
2015 Q4 545 1 0 1834.9
2015 Q3 533 1 0 1876.2
2015 Q2 584 0 0 0.0
2015 Q1 721 0 0 0.0
2014 Q4 999 0 0 0.0
2014 Q3 1,006 0 0 0.0
2014 Q2 1,007 1 0 993.0
2014 Q1 956 0 0 0.0
2013 Q4 1,105 1 0 905.0
2013 Q3 1,115 0 0 0.0
2013 Q2 1,163 0 0 0.0
2013 Q1 1,094 0 0 0.0
2012 Q4 1,024 0 0 0.0
2012 Q3 979 0 0 0.0
2012 Q2 1,099 0 0 0.0
2012 Q1 1,287 0 0 0.0
2011 Q4 1,050 0 0 0.0
2011 Q3 1,059 0 0 0.0
2011 Q2 1,119 1 0 893.7
2011 Q1 1,176 0 0 0.0
2010 Q4 1,098 0 0 0.0
2010 Q3 638 0 0 0.0
2010 Q2 831 0 0 0.0
2010 Q1 920 2 0 2173.9
2009 Q4 887 0 0 0.0
2009 Q3 932 0 0 0.0
2009 Q2 975 0 0 0.0
2009 Q1 1,129 0 0 0.0
2008 Q4 1,753 0 0 0.0
2008 Q3 1,731 0 0 0.0
2008 Q2 1,847 1 0 541.4
2008 Q1 1,486 3 1 2018.8
2007 Q4 1,693 0 0 0.0
2007 Q3 2,084 0 0 0.0
2007 Q2 2,131 2 1 938.5
2007 Q1 2,410 2 1 829.9
2006 Q4 2,525 0 0 0.0
2006 Q3 2,192 2 0 912.4
2006 Q2 2,584 0 0 0.0
2006 Q1 2,509 1 0 398.6
2005 Q4 2,639 1 1 378.9
2005 Q3 2,971 4 3 1346.3
2005 Q2 1,437 0 0 0.0
2005 Q1 2,774 3 0 1081.5
2004 Q4 3,492 0 0 0.0
2004 Q3 3,826 0 0 0.0
2004 Q2 4,071 3 2 736.9
2004 Q1 3,641 0 0 0.0
2003 Q4 3,441 3 0 871.8
2003 Q3 2,684 0 0 0.0
2003 Q2 2,837 1 0 352.5
2003 Q1 3,078 2 2 649.8
2002 Q4 2,797 0 0 0.0
2002 Q3 3,060 2 0 653.6
2002 Q2 2,603 0 0 0.0
2002 Q1 3,223 0 0 0.0
2001 Q4 4,783 1 0 209.1
2001 Q3 7,878 0 0 0.0
2001 Q2 6,809 0 0 0.0
2001 Q1 7,419 0 0 0.0
2000 Q4 6,243 3 1 480.5
2000 Q3 5,458 0 0 0.0
2000 Q2 4,300 2 2 465.1
2000 Q1 5,387 0 0 0.0
No fatalities recorded at this mine.

Reportable incidents

1 on file

2005 · 1 incident

March 5, 2005 PA · Coal FIRE
Selkirk Mining Company · Accident type, without injuries

Wood burner flue overheated and burned office trailer.