Mining Incidents

Sky Ridge Stone: 99 MSHA citations Metal/Non-Metal

Sky Ridge Stone LLC · Surface
Controlled by Joseph Mrak III
Gordon, Palo Pinto County, TX  ·  Active
MSHA Mine ID: 4104641

Sky Ridge Stone has $23K in proposed MSHA penalties and $9K outstanding across 7 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at Sky Ridge Stone.

Fatalities
0
Total incidents
2
Years on record
2019–2022
Latest incident
Nov 2022
Compliance record
MSHA citations since 2008
99
citations
21
significant & substantial
$23,129
proposed penalties
$12,617
paid to date
55% of proposed penalties paid to date, a $10,512 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2008
48
inspections on record
583
inspection hours
n/a
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 583 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.

Sky Ridge Stone has $23K in proposed MSHA penalties and $9K outstanding across 7 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$23K
proposed penalties
$22K
current assessed
$13K
paid to date
$9K
outstanding
95 assessments are final orders; 7 contested dockets.
Of $13K in penalties contested before the Commission, $8K was upheld in final decisions.
As of the most recent assessment on 2026-06-16.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
21.2%
significant & substantial
13.1%
high negligence or reckless
20.2%
reasonably likely or greater
35.4%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 1.0% low, 85.9% moderate, 13.1% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
When citations were contested
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
37 citations taken to the federal commission · 37% of citations on record
  • Settled 29 · 78%
  • Vacated or withdrawn 8 · 22%
70%
S&S designation survived the contest
Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.
of 10 decided S&S contests · industry: 79%
36%
Penalty reduction in decided contests
$13K proposed, $8K after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2023-11-20.
Contested penalties
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this mine contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
Docket Decision Judge Year Proposed / upheld
CENT 2013-238M Settlement Simonton 2013 $4K → $1K
CENT 2010-421M Settlement Rae 2012 $3K → $2K
CENT 2013-609M Settlement Bulluck 2014 $2K → $2K
CENT 2011-1253M Settlement Rae 2012 $1K → $1K
CENT 2024-0029 Settlement Manning 2024 $1K → $1K
CENT 2012-754M Settlement Lesnick 2013 $651 → $100
Source: FMSHRC civil penalty dockets and decisions (public record), updated weekly.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2009-10-14, 16 years ago
3
samples
0
limit-tested
Most sampled contaminants
  • Respirable dust, <.1mg3
Show the individual readings (3)
Date Contaminant Concentration Limit Conc / limit Occupation
2009-10-14 Respirable dust, <.1mg 0 Stone Polisher/Cutter
2009-10-14 Respirable dust, <.1mg 0 Stone Polisher/Cutter
2009-10-14 Respirable dust, <.1mg 0 Stone Polisher/Cutter
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.

Sky Ridge Stone recorded 0.00 reportable injury cases per 100 full-time workers in 2025.

Injury rate, 2025
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
Below average. The US metal and nonmetal mining average was 1.65 and the all-US-mining average was 1.97 cases per 100 workers.
In Texas, metal and nonmetal mining averaged 1.17 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2025 * 0.00 0.00 0.000
2022 * 7.47 0.00 0.000
2021 * 0.00 0.00 0.000
2020 * 0.00 0.00 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
  1. Arnold Stone Inc 2007 to 2018
  2. Arnold Stone Prds 2018 to 2024
  3. Sky Ridge Stone LLC 2024 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year Employees
2026 19
2025 21
2024 6
2023 10
2022 14
2021 14
2020 12
2019 12
2018 7
2017 7
2016 8
2015 7
2014 5
2013 11
2012 10
2011 11
2010 6
2009 6
2008 3
2007 6
Source: MSHA quarterly employment and production, updated weekly.

Sky Ridge Stone sits in Palo Pinto County, Texas, where the Census mining category is 3.5% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Palo Pinto County, Texas · Population 28,920
3.5%
Mining share of county employment
$64,972
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2026 Q2 3,802 4 0 1052.1
2026 Q1 9,465 6 1 633.9
2025 Q4 8,230 0 0 0.0
2025 Q3 11,290 2 0 177.1
2025 Q2 7,990 0 0 0.0
2025 Q1 3,462 2 0 577.7
2024 Q4 3,235 5 2 1545.6
2024 Q3 2,650 1 0 377.4
Show 69 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2024 Q1 1,081 4 0 3700.3
2023 Q4 2,645 0 0 0.0
2023 Q3 3,399 4 3 1176.8
2023 Q2 2,637 4 2 1516.9
2023 Q1 4,112 0 0 0.0
2022 Q4 4,802 0 0 0.0
2022 Q3 7,423 2 0 269.4
2022 Q2 7,397 0 0 0.0
2022 Q1 7,145 2 0 279.9
2021 Q4 9,482 0 0 0.0
2021 Q3 7,588 1 0 131.8
2021 Q2 5,957 2 0 335.7
2021 Q1 4,822 2 0 414.8
2020 Q4 4,468 0 0 0.0
2020 Q3 5,635 2 0 354.9
2020 Q2 6,027 0 0 0.0
2020 Q1 4,891 0 0 0.0
2019 Q4 3,687 3 1 813.7
2019 Q3 4,374 2 1 457.2
2019 Q2 6,657 0 0 0.0
2019 Q1 4,172 2 0 479.4
2018 Q4 3,908 0 0 0.0
2018 Q3 3,765 5 0 1328.0
2018 Q2 2,616 0 0 0.0
2018 Q1 2,024 3 2 1482.2
2017 Q4 2,496 0 0 0.0
2017 Q3 2,249 0 0 0.0
2017 Q2 2,568 1 0 389.4
2017 Q1 2,806 2 0 712.8
2016 Q4 3,890 0 0 0.0
2016 Q3 2,694 3 1 1113.6
2016 Q2 1,677 0 0 0.0
2016 Q1 1,623 1 0 616.1
2015 Q4 2,077 0 0 0.0
2015 Q3 3,403 1 1 293.9
2015 Q2 3,127 0 0 0.0
2015 Q1 1,639 0 0 0.0
2014 Q4 1,739 0 0 0.0
2014 Q3 1,548 0 0 0.0
2014 Q2 1,756 0 0 0.0
2014 Q1 1,488 4 0 2688.2
2013 Q4 2,419 0 0 0.0
2013 Q3 2,985 0 0 0.0
2013 Q2 4,145 5 1 1206.3
2013 Q1 5,152 0 0 0.0
2012 Q4 3,495 3 0 858.4
2012 Q3 2,240 0 0 0.0
2012 Q2 2,422 1 1 412.9
2012 Q1 4,631 1 1 215.9
2011 Q4 4,228 0 0 0.0
2011 Q3 4,230 6 1 1418.4
2011 Q2 3,078 0 0 0.0
2011 Q1 2,090 0 0 0.0
2010 Q4 1,936 0 0 0.0
2010 Q3 2,569 0 0 0.0
2010 Q2 2,174 0 0 0.0
2010 Q1 2,227 0 0 0.0
2009 Q4 2,514 10 3 3977.7
2009 Q3 2,066 0 0 0.0
2009 Q2 3,282 0 0 0.0
2009 Q1 1,889 0 0 0.0
2008 Q4 550 2 0 3636.4
2008 Q3 962 0 0 0.0
2008 Q2 1,046 0 0 0.0
2008 Q1 1,140 1 0 877.2
2007 Q4 2,794 0 0 0.0
2007 Q3 4,061 0 0 0.0
2007 Q2 2,150 0 0 0.0
2007 Q1 1,239 0 0 0.0
No fatalities recorded at this mine.

Reportable incidents

2 on file

2022 · 1 incident

November 12, 2022 TX · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer HANDLING OF MATERIALS
Arnold Stone Prds · Caught in, under or between (Not Elsewhere Classified)

Employee was working on the Generator. While stepping down, EE was holding on to the frame of the generator when EE's ring finger became caught, tearing the skin away from the finger. Had EE not been wearing a ring on the finger, the accident would have been avoided.

2019 · 1 incident

March 28, 2019 TX · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDLING OF MATERIALS
Arnold Stone Prds · Caught in, under or between a moving and a stationary object

While employee was loading stone block on pallet, the stone slipped in employee's hands and pinched finger between the stone and the pallet.