EMPLOYEE WAS FEEDING MATERIAL TO CRUSHER WITH LOADER. AS HE WAS READY TO DUMP A LOAD OF MATERIAL INTO THE CRUSHER, THE BACK END OF THE LOADER RAISED UP AND SWUNG AROUND. THE MATERIAL BERM GAVE WAY AND THE LOADER ROLLED DOWN THE HILL LANDING UPSIDE DOWN. EMPLOYEE RECEIVED SLIGHT SCRAPES AND BRUISES.
Smith River Pit & Mill: 19 MSHA citations Metal/Non-Metal
Smith River Pit & Mill has $1K in proposed MSHA penalties and $0 outstanding across 1 contested dockets, plus health sampling and the full incident record.
Watch this mine
Email me when a new MSHA incident is filed at Smith River Pit & Mill.
- Fatalities
- 0
- Total incidents
- 14
- Years on record
- 1984–1995
- Latest incident
- Nov 1995
ⓘ
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.Smith River Pit & Mill has $1K in proposed MSHA penalties and $0 outstanding across 1 contested dockets.
ⓘ
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.ⓘ
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.ⓘ
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.| Docket | Decision | Judge | Year | Proposed / upheld |
|---|---|---|---|---|
| WEST 2004-51-M | Dismissal | Lesnick | 2004 | $60 → $0 |
ⓘ
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.Metal and nonmetal contaminants (personal samples)
ⓘ
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.
Last sampled: 2009-07-07, 17 years ago
ⓘ
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.- Quartz, respirable, >1% Qtz2
- Respirable dust, <.1mg2
- Unlisted Particulate, respirable, <1% Qtz1
Show the individual readings (5)
| Date | Contaminant | Concentration | Limit | Conc / limit | Occupation |
|---|---|---|---|---|---|
| 2009-07-07 | Unlisted Particulate, respirable, <1% Qtz | 0.24 | Laborer, Bullgang | ||
| 2009-07-07 | Respirable dust, <.1mg | 0 | Supervisor, Co. Official | ||
| 2001-06-20 | Quartz, respirable, >1% Qtz | 0.28 | 0.97 | 0.29 | Crusher Oper/Worker |
| 2001-06-20 | Quartz, respirable, >1% Qtz | 0.3 | 1.07 | 0.28 | Laborer, Bullgang |
| 2001-06-20 | Respirable dust, <.1mg | 0 | Front-end Loader Operator |
- North Coast Paving & Rock 1950 to 2000
- Parnum Paving 2001 to 2002
- Granite Construction Company 2002 to present
| Year | Employees |
|---|---|
| 2011 | 3 |
| 2010 | 4 |
| 2009 | 8 |
| 2008 | 9 |
| 2007 | 11 |
| 2006 | 3 |
| 2005 | 2 |
| 2004 | 7 |
| 2003 | 4 |
| 2002 | 5 |
| 2001 | 15 |
| 2000 | 14 |
Smith River Pit & Mill sits in Del Norte County, California, where the Census mining category is 0.1% of county employment.
ⓘ
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.ⓘ
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2011 Q3 | 0 | 0 | 0 | |
| 2011 Q2 | 484 | 0 | 0 | 0.0 |
| 2011 Q1 | 573 | 0 | 0 | 0.0 |
| 2010 Q4 | 621 | 0 | 0 | 0.0 |
| 2010 Q3 | 1,713 | 0 | 0 | 0.0 |
| 2010 Q2 | 1,098 | 0 | 0 | 0.0 |
| 2010 Q1 | 460 | 2 | 1 | 4347.8 |
| 2009 Q4 | 305 | 0 | 0 | 0.0 |
Show 39 earlier quarters Hide earlier quarters
| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2009 Q3 | 422 | 1 | 0 | 2369.7 |
| 2009 Q2 | 884 | 0 | 0 | 0.0 |
| 2009 Q1 | 118 | 0 | 0 | 0.0 |
| 2008 Q4 | 57 | 0 | 0 | 0.0 |
| 2008 Q3 | 1,239 | 0 | 0 | 0.0 |
| 2008 Q2 | 121 | 0 | 0 | 0.0 |
| 2008 Q1 | 203 | 0 | 0 | 0.0 |
| 2007 Q4 | 440 | 0 | 0 | 0.0 |
| 2007 Q3 | 862 | 0 | 0 | 0.0 |
| 2007 Q2 | 532 | 2 | 0 | 3759.4 |
| 2007 Q1 | 98 | 0 | 0 | 0.0 |
| 2006 Q4 | 155 | 0 | 0 | 0.0 |
| 2006 Q3 | 1,174 | 2 | 0 | 1703.6 |
| 2006 Q2 | 445 | 0 | 0 | 0.0 |
| 2006 Q1 | 54 | 0 | 0 | 0.0 |
| 2005 Q4 | 676 | 0 | 0 | 0.0 |
| 2005 Q3 | 1,620 | 0 | 0 | 0.0 |
| 2005 Q2 | 484 | 0 | 0 | 0.0 |
| 2005 Q1 | 430 | 0 | 0 | 0.0 |
| 2004 Q4 | 933 | 1 | 0 | 1071.8 |
| 2004 Q3 | 1,435 | 0 | 0 | 0.0 |
| 2004 Q2 | 1,650 | 2 | 0 | 1212.1 |
| 2004 Q1 | 767 | 0 | 0 | 0.0 |
| 2003 Q4 | 1,834 | 0 | 0 | 0.0 |
| 2003 Q3 | 1,999 | 0 | 0 | 0.0 |
| 2003 Q2 | 1,650 | 1 | 0 | 606.1 |
| 2003 Q1 | 1,040 | 0 | 0 | 0.0 |
| 2002 Q4 | 3,076 | 0 | 0 | 0.0 |
| 2002 Q3 | 2,561 | 1 | 0 | 390.5 |
| 2002 Q2 | 752 | 0 | 0 | 0.0 |
| 2002 Q1 | 961 | 0 | 0 | 0.0 |
| 2001 Q4 | 599 | 0 | 0 | 0.0 |
| 2001 Q3 | 2,581 | 0 | 0 | 0.0 |
| 2001 Q2 | 2,015 | 1 | 0 | 496.3 |
| 2001 Q1 | 1,798 | 0 | 0 | 0.0 |
| 2000 Q4 | 3,486 | 0 | 0 | 0.0 |
| 2000 Q3 | 3,187 | 0 | 0 | 0.0 |
| 2000 Q2 | 2,189 | 6 | 2 | 2741.0 |
| 2000 Q1 | 4,569 | 0 | 0 | 0.0 |
Reportable incidents
14 on file1995 · 2 incidents
EE WAS TIGHTENING NUTS ON JAW CRUSHER WITH SOCKET WRENCH WRENCH SLIPPED SMASHING MIDDLE FINGER OF RIGHT HAND BETWEEN WRENCH AND JAW CRUSHER.
1993 · 2 incidents
EMPLOYEE WAS PUTTING NEW LAGGING ON SHUT OFF CONVEYOR TO IMPACT CRUSHER. AS HE STRAIGHTENED UP TO GET OFF THE CONVEYOR HE FELT A SHARP PAIN IN HIS BACK.
EMPLOYEE WAS REMOVING COMPENSATOR FROM CRUSHER, USING A HAMMER TO DISLODGE A NUT. THE HAMMER DEFLECTED OFF THE RIM OF THE CONE, CAME DOWN STRIKING EMPLOYEE ON LEFT HAND, BRAKING HAND.
1992 · 3 incidents
EMPLOYEE WAS LOOSENING CAP OVER AIR POT (SPRING LOADED) TO CHANGE RUBBER DIAPHRAM ON 175 MICHIGAN LAODER, SPRING RELEASED CAP WHICH HURLED UP STRIKING EMPLOYEE ABOVE RIGHT EYE BROW. EMPLOYEE RQUIRED STITCHES TO GASH IN HEAD ABOVE RIGHT EYE.
WORKING ON HOT PLANT CLOSING LID ON CONV FINE SAND FROM OFF LID BLEW IN FACE AND EYE
EMPLOYEE WAS HOLDING DOWN CATWALK MATERIAL WHILE ANOTHER EMPLOYEE WAS WELDING ON IT.INJURED EMPLOYEE CHANGED POSITIONS AND SAW FLASH FROM WELDER.
1991 · 3 incidents
EMPLOYEE WAS WORKING ON CONE OF CRUSHER, CUT RIGHT THUMB ON PIECE OF METAL ON CRUSHER.
EMPLOUYEE WAS FEEDING CRUSHER WITH DOZER ON STOCKPILE-WIND BLEW FOREIGN PARTICLES INTO EMPLOYEE'S LEFT EYE.
EMPL WAS TAKING BRAKES OFF 980 LOADER TO CHANGE HE TOOK PLANITORY GEAR OFF & SET IT ON BENCH. PLANITORY GEAR SLIPPED OFF BENCH & ONTO EMPL'S LEFT FOOT. LEFT FOOT WAS BROKEN.
1988 · 2 incidents
EMPL WAS OPERATING CRUSHER HE MOVED ROCK WITH RIGHT HAND LARGE ROCK CAME OFF CRUSHER BELT SMASHING HAND.
EMPL WAS PUTTING NEW WARE PARTS ON IMPACT CRUSHER. CHECKING WARE PARTS ALIGNMENT WITH HAND. ADJUSTMENTS TO ALIGNMENT USUALLY MADE WITH HAND HELD HAMMER. ANOTHER EMPL USING HAMMER HIT INJUR ED EMPL'S FINGER WITH HAMMER.
1987 · 1 incident
EMPLOYEE WAS WE5DING ON A PULLEY FOR THE CRUSHER-A PARTICAL (METAL) FLEW UP AND INTO RIGHT EYE.
1984 · 1 incident
EMP WAS CHANGING A ROLLER ON THE CRUSHER AT TIME OF OCURRANCE HE WAS PRYING A NUT OFF THE CRUSHER WITH A WRENCH THE WRENCH SLIPPED OFF THE NUT AND THE EMP FELL OVER BACKWARDS OFF THE CRUSH HE LANDED ON HIS LEFT KNEE