Mining Incidents

Stinnett: 65 MSHA citations Coal

Controlled by Thomas R Hamilton
Stinnett, Leslie County, KY  ·  Abandoned
MSHA Mine ID: 1519825

Stinnett has $23K in proposed MSHA penalties and $11K outstanding across 3 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at Stinnett.

Fatalities
0
Total incidents
3
Years on record
2019
Latest incident
Sep 2019
Compliance record
MSHA citations since 2018
65
citations
7
significant & substantial
$22,617
proposed penalties
$10,481
paid to date
46% of proposed penalties paid to date, a $12,136 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2018
14
inspections on record
802
inspection hours
n/a
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 802 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.

Stinnett has $23K in proposed MSHA penalties and $11K outstanding across 3 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$23K
proposed penalties
$21K
current assessed
$10K
paid to date
$11K
outstanding
65 assessments are final orders; 3 contested dockets.
Of $6K in penalties contested before the Commission, $4K was upheld in final decisions.
As of the most recent assessment on 2020-12-09.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
10.8%
significant & substantial
6.2%
high negligence or reckless
10.8%
reasonably likely or greater
6.2%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 10.8% low, 83.1% moderate, 6.2% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
When citations were contested
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
15 citations taken to the federal commission · 23% of citations on record
  • Settled 15 · 100%
67%
S&S designation survived the contest
Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.
of 3 decided S&S contests · industry: 79%
21%
Penalty reduction in decided contests
$6K proposed, $4K after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2021-02-01.
Contested penalties
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this mine contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
Docket Decision Judge Year Proposed / upheld
KENT 2019-0234 Settlement Manning 2019 $3K → $2K
KENT 2020-0020 Settlement Manning 2020 $3K → $2K
KENT 2021-0048 Settlement Bulluck 2021 $308 → $275
Source: FMSHRC civil penalty dockets and decisions (public record), updated weekly.

MSHA sampling at Stinnett shows 100% of 95 respirable coal dust samples met the 1.5 mg/m3 standard.

Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Respirable coal dust
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.

Last sampled: 2021-02-08, 5 years ago
100%
within 1.5 mg/m3
95
samples
0.63
dust max (mg/m3)
0
over MSHA ECV
The excessive concentration value (ECV) is MSHA's own per-sample enforcement threshold, which builds in measurement uncertainty; a sample over its ECV can trigger a citation. The count covers only samples MSHA assigned an ECV.
47 samples taken by MSHA inspectors, 48 by the operator.
Most-sampled occupations
  • BULLDOZER OPERATOR50
  • HIGHWALL DRILL OPERATOR26
  • HIGHLIFT OPERATOR/FRONT END LOADER6

Silica (quartz)

Last sampled: 2020-12-08, 5 years ago
26.8
silica avg (%)
10
samples
49.7
silica max (%)
Most-sampled occupations
  • BULLDOZER OPERATOR8
  • HIGHWALL DRILL OPERATOR2

Noise
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.

Last sampled: 2020-12-09, 5 years ago
0%
over PEL
25
samples
Most-sampled occupations
  • BULLDOZER OPERATOR5
  • HIGHLIFT OPERATOR/FRONT END LOADER5
  • HIGHWALL DRILL OPERATOR5
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.
Health sampling trend
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.
Respirable coal dust by year
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.
Year within 1.5 mg/m3 samples
2021 100% 3
2020 100% 38
2019 100% 34
2018 100% 20
Silica (quartz) by year
Year silica avg (%) samples
2020 27.0 3
2019 24.8 5
2018 31.6 2
Noise by year
Year over PEL samples
2020 0% 10
2019 0% 10
2018 0% 5
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.

Stinnett recorded 0.00 reportable injury cases per 100 full-time workers in 2020.

Injury rate, 2020
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
Below average. The US coal mining average was 3.19 and the all-US-mining average was 2.08 cases per 100 workers.
In Kentucky, coal mining averaged 3.67 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2020 * 0.00 0.00 0.000
2019 5.80 3.86 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
  1. Nally & Hamilton Enterprises Inc. 2018 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Coal production is reported quarterly and lags the current period; the most recent quarters may be incomplete.
Year Employees Coal produced (tons)
2021 10 16,484
2020 29 186,300
2019 32 331,948
2018 29 250,383
Source: MSHA quarterly employment and production, updated weekly.

Stinnett sits in Leslie County, Kentucky, where the Census mining category is 10.6% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Leslie County, Kentucky · Population 10,261
10.6%
Mining share of county employment
$40,176
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2021 Q2 3,722 0 0 0.0
2021 Q1 12,362 0 0 0.0
2020 Q4 20,407 8 0 392.0
2020 Q3 16,574 11 2 663.7
2020 Q2 24,138 0 0 0.0
2020 Q1 23,978 6 0 250.2
2019 Q4 20,361 0 0 0.0
2019 Q3 27,680 7 1 252.9
Show 5 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2019 Q2 27,600 0 0 0.0
2019 Q1 27,859 10 1 359.0
2018 Q4 22,634 2 0 88.4
2018 Q3 23,921 0 0 0.0
2018 Q2 21,280 12 2 563.9
No fatalities recorded at this mine.

Reportable incidents

3 on file

2019 · 3 incidents

September 24, 2019 KY · Coal greaser, grease man, oiler, lube man, dragline oiler HANDTOOLS (NONPOWERED)
Nally & Hamilton Enterprises Inc. · Fall from machine

Employee was changing a hydraulic filter on a D-11 Dozer when employee's wrench slipped, employee fell off dozer on ground cutting right side of face above ear, receiving (5) staples.

March 16, 2019 KY · Coal greaser, grease man, oiler, lube man, dragline oiler SLIP OR FALL OF PERSON
Nally & Hamilton Enterprises Inc. · Over-exertion (Not Elsewhere Classified)

Employee had gotten off grease truck, was walking and step in a small dip in ground and turned left ankle. Just found out ee has been off from work for this injury.