SUWANNEE RIVER MINE Metal/Non-Metal

EE WAS TO CHECK COOLANT AND ENGINE OIL ON A 627E PAN. AFTER EE HAD COMPLETED BOTH CHECKS HE WENT TO DISMOUNT THE MACHINE ON THE RIGHT SIDE. THE STEP HAD BEEN PUSHED INTO A LOCKED UNSAFE POSITI ON. EE SOMMITTED TO STEP DOWN AND WITH NO STEP TO SUPPORT HIS BODY WEIGHT, HE WAS SUSPENDED BY HIS RIGHT ARM & SHOULDER THUS PULLING HIS RIGHT SHOULDER.

EE HAD THE TASK OF REMOVING PARTS FROM A 3406 CAT D8N ENGINE. IN REMOVING PART FROM THE CYLINDER HEAD, EE HAD A PROBLEM WITH THE BOLTS SECURING THE TURBO MOUNT TO EXHAUST MANIFOLD. THE NUTS WE RE NOT HEAT RESISTANT AND HAD ROUNDED OFF. EE MADE THE DECISION TO USE A CHISEL. EE HAD ALMOST FINISHED THE CUTTING, WHEN HE MISSED CAUSING THE CHISEL TO HIT HIS L THUMB AGAINST MANIFOLD, CUT

EMPLOPYEE STATED THAT AS HE WAS CLOSING THE CHAIN LINK GATE ON THE BALL PEN, HE FELT A SHARP PAIN IN RIGHT SHOULDER.

EE SUSPECTS THAT OPERATING THE BLADE LEVER ON DOZER CAUSED THE PROBLEM.

INJURED EE WAS REMOVING THE POP TOP FROM A 50 LB METAL CONTAINER OF 1018 WELDING RODS. WHEN THE POP TOP BROKE LOOSE IT HIT THE EE S LEFT FOREARM CAUSING A 3" LACERATION. THE EDGES OF THE POP T OP WERE EXTREMELY SHARP.

EMPLOYEE WAS OPERATING AN OVERHEAD HOIST WHEN HIS LEFT MIDDLE FINGER GOT TRAPPED IN EYE OF NYLONSTRING.

EE WAS HELPING MOVE A 3/4" METAL PLATE WHEN HIS RIGHT HAND SLIPPED OFF PLATE, PLATE THEN DROPPED DOWN CATCHING HIS LEFT HAND BETWEEN PLATE AND BOOM TRUCK BED. EE REMOVED HIS GLOVE AND OBSERVBE D HIS LEFT 3RD DIGIT TIP HAD BEEN MASHED AND CUT.

EE WAS REPAIRING THE HYDRAULIC SYSTEM ON 627 PAN. THE HYDREAULIC VALVE ASSEMBLY WEIGHS APPROX. 100 POUNDS. LEFT FRONT TIR AND FENDER HAD BEEN REMOVED. A THREE STEP PLATFORM WAS MOVED INTO PLAC E TO GAIN ACCESS. AFTER LINKAGE WAS DISCONNECTEDEE SAT VALVE ASSEMBLY ON WHEEL SPINDLE TO REPOSITION BODY. AS HE MOVE LEFT TO DESCEND STEPS, HE FELT PAIN IN GROIN AREA-LEFT SIDE.

WHILE WELDING DEBRIS FELL INTO HIS EYE. EMPLOYEE WAS WEARING SAFETY GALSSES AT TIME OF ACCIDENT.

EMP WAS ASSISTING IN LOADING A FAULTY REFRIGERATOR ONTO THE BED OF A PICKUP TRUCK. INJURED EMP REMOVED AN OBJECT FROM THE TOP OF THE REFRIGERATOR AND PLACED IT ON THE GROUND. WHEN HE RAISED BA CKUP TO ASSIST IN MOVING REFRIGERATOR, OTHER EMPTILTED UNIT TOWARDS INJURED EMP AND TOP EDGE OF UNIT STRUCK HIM IN MOUTH, CHIPPING HIS TOOTH.

EMPLOYEE WERE REMOVING A 1/4 SECTION OF THE TIRE ON THE "Y"-TRAIN DRYER. EMPLOYEE HAD WELDED A LIFTING LUG TO THE 1/4 SECTION FOR ATTACHING A CHAIN HOIST FOR LOWERING TO THE PLATFORM BELOW (9 FOOT). THE PULL CHAIN ON THE HOIST HAD BECOME ENTANGLED & WOULD NOT OPERATE. EMPLOYEES WERE ABOVE THE SUSPENDED LOAD. FOREMAN CAME OVER TO FREE PULL CHAIN. LUG BROKE & FOREMAN KNOCKED TO FLOOR

EE WAS HAULING SAND TO #3 DL WHEN HE HIT A SOFT SPOT IN THE ROAD CAUSING THE PAN TO DIP SUDDENLY. LATER IN THE DAY, EE FELT SLIGHT STIFFNESS IN HIS NECK. FOLLOWING MORNING, EE STILL HAD STIFFN ESS & CONTRIBUTED IT TO THE PAN DIPPING SUDDENLYWHICH CAUSED HIM TO BER STIFF W/O NOTICE WHILE OPERATING THE PAN.

EE WAS GOINT TO FRONT OF MACHINE FROM OPERATOR'S CAB TO GET HIS WATER COOLER. AS EE GRABBED THE TOP HANDRAIL TO SWING AROUND TO THE FRONT OF THE PAN, THE WEIGHT PRESENTED ON THE GRABRAIL CAUSE D THE BOLTS TO SHEAR, CAUSING THE HANDRAIL TO BECOME DETACHED WHICH IN TURN CAUSED EE TO FREE FALL APPROX. 6-8' TO THE GROUND.

PERSON HAS WORKED IN MOBILE MAINTENCE HIS ENTIRE TIME (15 YEARS) WITH OCCIDENTAL. HE HAS BEEN REQUIRED TO USE HANDS TO PULL WRENCHES, USE PNEUMATIC TOOLS ETC. HE NOTICED HAND GOING TO SLEEP OR CRAMPING 5 YEARS AGO. LEFT IS WORSE THAN RIGHT. HE HAS SAID HE VISITED CLINIC FOR THIS BUT CLINIC NURSE HAS FOUND NO RECORDS TO DOCUMENT THIS. PROBLEM HAS INTENSIFIED & MAY REQUIRE DR.

EE WAS INSTALLING A NEW 1 1/4 IN WINCH CABLE ON A D8L BULLDOZER. EE ATTEMPTED TO SECURE THE END OF THE CABLE IN THE SLOT ON THE SIDE OF WINCH. DURING THIS PROCESS, THE END OF THE CABLE CAME LO OSE, SPRINGING BACK, STRIKING EE ABOVE THE RT EYE.

EE WAS REMOVING A PIECE OF CONCRETE APPROX. 10-12 INCHES IN DIAMETER FROMT HE DISCHARGE CHUTE AT GATE 22 OF THE TUNNEL CONVEYOR BELT AS HE REACHED UNDER THE CHUTE WITH HIS LEFT HAND, THE PIECE OF CONVERTE FELL FREE, PINCHING HIS LEFT THUMB AGAINST THE BOTTOM EDGE OF THE METAL DISCHARGE CHUTE.

EMPLOYEE HAD CLIMBED UP ON TOP OF WATER TANKER TO GET A PIECE OF ROPE. AS HE WAS CLIMBING DOWN OFF TANKER HE MISSED THE LAST STEP & FELL BACKWARDS STRAINING HIS NECK & RIGHT SHOULDER.

EMPLOYEE FEELS HIS CARPAL TUNNEL SYNDROME IS AN ACCUMULATION OF YEARS OF HEAVY WORK

EMPLOYEE & CO-WORKERS WERE SWEEPING SHOP AREA WHEN A GUST OF WIND BLEW SAND INTO HIS FACE & EYES. EMPLOYEE RECEIVED A FOREIGN BODY IN LEFT EYE THAT RESULTED IN ABRASION WHICH REQUIRED TREATME NT WITH PRESC. EYE DROPS.

EMPLOYEE HAD DISMOUNTED A PAN WAS WALKING TOWARD FRONT OF VEHICLE WHEN SLIPPED IN MUD & FELL. EMPLOYEE BENT OVER TO PICK UP HARD HAT WHEN HE STRUCK FOREHEAD ON LEFT REAR FENDER OF PAN.

EMPLOYEE WAS REMOVING A 4 INCH DIAMETER HOSE FROM A SEALING WATER PUMP. WHEN HE UNSCREWED THE CONNECTION, THE ASSEMBLY DROPPED APPROX. 4". HIS LEFT INDEX FINGER WAS CAUGHT BETWEEN THE HOSE COU PLER AND A LIFTING LUG ON THE PUMP SLED.

EMPLOYEE WAS EXITING THE PASSENGER SIDE OF A COMPANY TRUCK. AS HE WAS CLOSING THE TRUCK DOOR, A GUST OF WIND BLEW THE DOOR CLOSED BEFORE EMPLOYEE COULD MOVE HIS HAND. HIS LEFT MIDDLE FINGER WA S CAUGHT BETWEEN THE DOOR AND THE BODY OF THE TRUCK.

54736YEE CHANGED OUT A 400 AMP CIRCUIT BREAKER IN A CUTLER HAMMER STARTER. UPON ENERGIZING TEH CIRCUIT BREAKER A FAUTL APPEARED AT THE BREAKER CAUSIGN A FLASH INSIDE OF THE CABINET WHICH RESU 33540IN THE DOOR BEING EXPANDED AND THE FLASH CONTINUING OUTSIDE, BURNIGN THE EMPLOYEE'S LEFT FOREARM.

EMPLOYEE WAS OPERATING A 627 PAN WHICH BECAME STUCK IN AROADSIDE DITCH.ANOTHER PAN ATTEMPTED TO PULL THE STUCK PAN OUT OF THE DITCH.IN THE PROCESS,THE STUCK PAN FELL ONTO ITS SIDE.EMPLOYEE CLI MBED OUT AND STEPPED ONTO THE TIRE TO CLIM DOWN.THE TIRE TURNED CAUSING HIM TO FALL AND STRIKE HIS LEFT THIGH ON AN ANGLE IRON GUARD RESULTING IN A LACERATION REQUIRING 50 SUTURES AND STAPLES

EE WAS WORKING OVERHEAD USING A ROUTER WHEN A FOREIGN BODY ENTERED HIS RIGHT EYE CAUSING A CORNEAL ABRASION.

INJURED EMPLOYEE, ALONG WITH OTHER MEMBERS OF THE LINE CREW WERE RETIRING POWER LINES FROM POLES IN THE #3 MINE AREA. EMPLOYEE WAS WORKING AT THE BASE OF A POWER POLE WHEN HE WAS STRUCK ON THE HEAD (HARD HAT) BY A LINE CONDUCTOR (WIRE), WHICH FELL APPROX. 15 FEET.

EMPLOYEE WAS WELDING ON LAUNDERS WHEN HE RECEIVED FLASH BURNS TO HIS EYES.

EMPLOYEE WAS STANDING ON A TRAILER TONGUE ATTEMPTING TO REMOVE A HITCH TO SEPARATE THE TRAILER FROM A PAYLOADER. AS HE STARTED TO DISMOUNT THE TRAILER TONGUE, HE STRUCK HIS LEFT ELBOW AGAINST THE EDGE OF THE FLANGE ATTACHED TO THE END OF THE MATRIX PIPE THAT WAS LOADED ON THE TRAILER.

EMPLOYEE ALLEGES THAT WHILE WORKING ON A TRACTOR IN AN AWKWARD PSOTIION USING A IMPACT WRENCH HE STRAINED HIS BACK.

EMPL USING PLIERS TO BEND OFF BROKEN STRAND OF DRAGLINE CABLE WHEN PLIERS SLIPPED CAUSING EMPL TO CUT RIGHT FOREARM ON THE WIRE.

EMPL DISMOUNTING CABLE REEL TRUCK WHEN RIGHT LEG GOT CAUGHT ON A METAL STRAP USED TO HOLD MUD FLAP TO FENDER.RESULTED IN LACERATION TO RIGHT LEG

EMPL ATTACHING CHAIN TO TOP OF SPILLWAY RISER.STANDING ON RISER FRAME 5' OFF GROUND,LOST FOOTING AND JUMPED BACKWARD LANDING ON ROUGH,UNEVEN GROUND.

EMPL WALKING FROM PARKING LOT TO SHOP AND TRIPPED OVER ELEVATION STRING AND FELL.

EMPLOYEE WAS PULLING A 7FT SECTION OF CABLE WHEN HE STRAINED HIS BACK

EMPLOYEE WAS MOVING TRAIL CABLE WHEN HE STRAINED HIS BACK.

EE STATED SHE TWISTED HER LEFT FOOT IN THE PARKING LOT AND FRACTURED IT.

EMPLOYEE WAS HELPING INSTALL AN AXLE ON A GRADER WHEN HE STRAINED HIS LEFT SHOULDER AND UPPER BACK.

EE STATES THAT HE WAS LEANING AGAINST THE HOOD OF A TRUCK WHEN ANOTHER EE ENGAGED THE TRANSMISSION AND THE TRUCK WHEEL RAN OVER HIS RIGHT FOOT.

EMPLOYEE STATES HE WAS ATTEMPTING TO MOVE A DRAGLINE POWER CABLE WHEN HE LOST HIS BALANCE & FELL STRAINING HIS LOWER BACK

REWINDING BREAKER DISCHARGE SPRING USING RATCHET WHEN THE RATCHET SLIPPED CAUSING TO STRUCK HIS R HAND ON COVER LACER R FINGER

EMPLOYEE WAS TRYING TO HOOK UP A HYDRAULIC LINE ON THE BOTTOM OF A PUMP WHEN HIS HAND SLIPPED STRIKING HIS ARM ON A PUMP GUARD.

EMPLOYEE WAS INSTALLING ELECTRICAL EQUIPMENT INSIDE THE #1 DRAGLINE WHILE MECHANICS WERE INSTALLING SHEET METAL ON THE OUTSIDE WHEN SLAG FROM THE WELDING ROD PENETRATED THE MACHINE HOUSE, DROP PING ONTO THE EMPLOYEE.

EMPLOYEE WAS CHANGING THE HYDRAULIC FILTERS ON A DREDGE WHEN THE WRENCH SLIPPED CAUSING THE EMPLOYEE TO FALL,STRAINING HIS LEFT KNEE.

EMPLOYEE WAS IN A MANLIFT WHEN HE NOTICED A PICKUP TRUCK ROLLING BACKWARDS. EMPLOYEE STARTED RUNNING TOWARD THE TRUCK TO TRY AND STOP THE TRUCK FROM ROLLING WHEN HE WAS STOPPED ABRUPTLY BY THE LIFELINE HE HAD ON.

EMPL WELDING IN MAINT.SHOP THROUGHOUT DAY AND REPORTED EYE IRRITATION UPON REPORTING TO WORK 1-4

EMPLOYEE WAS HELPING UNLOAD A SULFURIC ACID CAR RUPTURE VALVE ASSEMBLY WAS PLUGGED WITH SULFATE BUILDUP & WOULD NOT LET THE CAR VENT PROPERLY EMPLOYEE PROCEEDED TO OPEN THE ACID LINE & ACID SP RAYED OUT HITTING THE EMPLOYEE

EMPLOYEE WAS OPERATING A PAN WHEN HE LOST CONTROL CAUSING THE PAN TO TURN OVER LANDING ON ITS SIDE CAUSING THE EMPLOYEE TO SPRAIN HIS RIGHT ANKLE.

EE WAS USING A MACHETE TO CHOP TREES WHEN THE MACHETE DEFLECTED OFF AN OBJECT AND STRUCK EE ON HIS RIGHT WRIST.

EMPLOYEE WAS INSTALLING HANDRAILS AT THE FLOAT PLANT. AS HE WAS FITTING A HAND RAIL SECTION INTO PLACE FOR WELDING, HIS HANDS SLIPPED CAUSING HIM TO CONTACT AN AREA OF THE HANDRAIL SECTION THA T HAD JUST BEEN WELDED RESULTING IN A SECOND DEGREE BURN TO HIS LEFT WRIST.

EE AND CO WORKER WAS REMOVING FABRICATED STEPS FROM A FLATBED TRUCK. THE CO WORKER WAS USING THE TORCH AND THE EE WAS HOLDING THE STEPS. WHEN THE STEPS WERE CUT FREE, THE ROLLED BACK AND STRUC K THE EE.

EMPLOYEE WAS LAYING PIPE WHEN HE RECEIVED MULTIPLE ANT BITES TO HIS HANDS WHICH CAUSED SECONDARY FUNGUS INFECTION.

EE WAS DESCENDING A CHERRYPICKER WITH HIS LEFT HAND ON THE HANDRAIL AND STRAINED HIS LEFT SHOULDER.

EMPLOYEE WAS STEPPING DOWN FROM A FLAT CONCRETE SURFACE TO A PEBBLE SURFACE WHEN THE PEBBLES SHIFTED UNDER HIS RIGHT FOOT CAUSING A STRAIN TO HIS RIGHT KNEE.

EMPL STEPPED OVER 18"CULVERT PIPE AND TURNED RIGHT ANKLE.

EMPLOYEE WAS ATTEMPTING TO CLIM INTO THE SEAT OF A GRADALL FORKLIFT.AS HE WAS STEPPING INTO THE CAB AND PULLING HIMSELF AT THE SAME TIME,HE STRUCK HIS RIGHT ELBOW ON THE DOOR FRAME.

EMPLOYEE STATES HE WAS DRIVING A GRADALL WHEN IT SUDDENLY DECELERATED CAUSING A STRAIN TO HIS NECK.

EE AND CO WORKER WAS IN A MANLIFT BASKET WELDING WHEN THE EE RECIEVED FLASH BURNS TO BOTH EYES.

EMPLOYEE WAS OPERATING A BULLDOZER WHEN IT FELL INTO A HOLE CAUSING THE OPERATOR TO FALL FORWARD STRIKING HIS HEAD ON THE INSTRUMENTATION PANEL.

EMPL OPERATING PAN.WHILE BEING PUSHED BY BULLDOZER,EMPL JOLTED BY BULLDOZER PUSHING PAN CAUSING NECK STRAIN.

EMPLOYEE WAS ATTEMPTING TO DRIVE A DISC OFF A NARROW SHAFT WHEN HIS HAMMER GLANCED OFF ADJOINING DISC AND STRUCK HIS LEFT LITTLE FINGER.

EMPL WAS USING PRY BAR TO RAISE PIECE OF GRATING TO REMOVE OBJECT FROM UNDERNEATH WHEN GRATING SLIPPED OFF PRY BAR & FELL ACROSS EMPLS LEFT WRIST.

ATTEMTP TO UNROLL CUTTING TORCH HOSE FORM REEL PULLED ON HOSE, EMP STRUCK R ELBOW ON DOOR OF LOCKER

EMPLOYEE WAS OBSERVING A CO-WORKER CUTTING DOWN A 20" TREE. EMPLOYEE WAS APPROXIMATELY 14' FROM THE TREE BEING CUT WHEN HE WAS STRUCK ON THE HEAD BY A 26' (DEAD AND ROTTED) TREE WHICH WAS 18' TO HIS REAR.

EMPLOYEE WAS INSTALLING A SEAL PLATE ON THE IMPELLER END OF A PUMP BEARING UNTI WHICH IS SECURED BY SCREWS. EMPLOYEE WAS APPLYING PRESSURE ON THE END OF THE SCREWDRIVER WITH HIS LEFT HAND WHIL E TURNING IT WITH A 6" ADJUSTABLE WRENCH WITH HIS RIGHT HAND. THE SCREWDRIVER SLIPPED OFF THE SCREW, ALLOWING EMPLOYEE'S LEFT THUMB TOSTRIKE AGAINST THE SHOULDER OF THE SHAFT, CAUSING THE LAC

EMPLOYEE WAS ATTEMPTING TO UNLOAD A EXCAVATOR FROM A LOWBOY WHEN HE SLIPPED & FELL TO THE BED OF THE LOWBOY STRIKING HIS RIGHT SIDE

EE WAS USING A HAND CART TO MOVE A PIPE STAND WHEN HE GOT HIS RIGHT LITTLE FINGER PINCHED BETWEEN THE PIPE AND THE HANDLE ON THE CART, LACERATING HIS FINGER.

EMPL APPLYING HARD COAT WELD TO INSIDE OF 42" 90 DEGREE PIPE FITTING.A FAN WAS SET UP TO EXHAUST FUMES AND SMOKE OUT AND AWAY FROM EMPL.AIR TURBULENCE CAUSED FOREIGN MATERIAL TO ENTER LEFT EYE

EMPLOYEE WAS TRANSFERRING DRY ROCK INTO BIN #6 IN HEADHOUSE. HE OBSERVED SOME SPILLAGE/LEAKAGE OUT OF SHUTTLE CONVEYOR. HE STEPPED UP ON DECK/RAIL ABOVE NORMAL WORK PLATFORM TO VISUALLY OBSERV E EXACT SPILLAGE PROBLEM. AFTER THE OBSERVATION HE STEPPED BACK TO WORK ON PLATFORM CAUSING AN ANKLE SPRAIN.

AFTER WELDING ON PREWASHER MUDBALL BELT LEVEL EMPLOYEE BROKE OUT WITH A RASH ON FACE & ARM (RIGHT)

EMPLOYEE WAS REMOVING OPERATING SUPPLY MATERIALS FROM CAB SIDE SHOE #1 DRAGLINE INTO THE DRAGLINE HOUSE. AS EMPLOYEE STOOPED TO PICK UP A ROLL OF TUB PAPER HE "BLACKED OUT" AND DOESN'T REMEMBE R ANYTHING UNTIL HE FOUND HIMSELF ON THE GROUND.HE HAD LACERATED HIS LOWER LIP FROM TEETH BITE.

EMPLOYEE WAS USING A CLEAN-UP HOSE ON HIGH PRESSURE WASHING HIS WORK AREA WHEN HE STRAINED HIS BACK.

EMPLOYEE WAS LAND CLEARING USING A BULLDOZER AS THE EMPLOYEE STARTED PUSHING A TREE THE BLADE SLIPPED OFF SIDE OF THE TREE CAUSING A QUICK SURGE WITH BULLDOZER EMPLOYEE STATES THAT AFTER HE BE GAN EXPERIENCING LOWER BACK PAIN

TRYING TO MOVE STARTER STRAINED R SHOULDER

EMPL WAS PUTTING ROLLER ON HOOD FRAME OF A VEHICLE WHEN THE TORSION BAR SLIPPED FROM BEHIND THE HOOD FRAME CATCHING HIS L INDEX FINGER BETWEEN THE ROLLER AND TORSION BAR

EMPL INSTALLING LEFT REAR SHOCK ON VEHICLE USING IMPACT WRENCH.7/8" SOCKET RETAINER RING LOST SPRING TENSION ALLOWING SOCKET TO COME OFF STRIKING EMPL ON RIGHT MIDDLE FINGER.EMPL SENT TO HOSP AND RETURNED TO WORK.

EMPL STEPPED ON MATRIX SCREEN CAUSING HIM TO FALL AGAINST RAIL.

EMPLOYEE WAS CLIMBING ACROSS PUMP SUCTION WITH A WATER HOSE IN HIS HAND WHEN HIS FOOT SLIPPED OFF THE PIPE CAUSING HIM TO FALL,STRIKING HIS RIGHT ARM ON THE PIPE FLANGE.

EMPL WAS ATTEMPTING TO FREE DRAG CABLE WHICH WAS HUNG UP ON THE BOLT OF TRI-PLATE AS THE EMPL TURNED TO GET A PRY BAR THE CABLE SLIPPED OUT OF SOCKET AND STRUCK HIM ON THE BACK OF HIS LEG

ROLLING OUT CABLE CUT HIS L THUMB ON CABLE SPOOL.

EMPLOYEE STATED THAT AS HE WAS TAKING BOLTS OUT OF A JOINT OF PIPE, USING A SPUD WRENCH, HE FELT PAIN IN HIS LOWER BACK.

EE WAS MOVING BALES OF HAY OF HOOKER BAY AREA WHEN HE NOTICED HIS CHEST AREA STARTED ITCHING.

EMPLOYEE WAS ASSISTING IN THE INSTALLATION OF A 18" GATE VALVE BEING SUSPENDED FROMTHE BOOM OF A BULLDOZER. THE INJURED EMPLOYEE AND THE BULLDOZER OPERATOR WAS TRYING TO LINE UP THE BOLT HOLES IN THE FLANGES. AS THE INJURED EMPLOYEE STOOD UP FROM A KNEELING POSITION TO GET OUT OF THE WAY, THE VALVE SLIPPED, SWINGING TOWARD HIM AND PINNING HIM BETWEEN IT AND ANOTHER GATE VALVE.

EMPLOYEE WAS CUTTING A DRILL LINE IN THE WOODS AND CAME IN CONTACT WITH POISON IVY.

EMPL WAS INSTALLING FAN COVER AT TIME OF INJURY. HE HAD STARTED ONE SCREW WHEN COVER SHIFTED. IN EFFORT TO STOP COVER FROM SHIFTING LEFT INDEX FINGER CAME IN CONTACT WITH SARP EDGE ON SHEET ME TAL FRAME.

EMPLOYEE WAS USING A MACHETE TO BUSHES WHEN THE MACHETE GLANCED OFF THE BUSH, STRIKING THE EMPLOYEE'S RIGHT FOOT. IT CUT THROUGH HIS BOOT, CAUSING A SMALL LACERATION TO HIS RIGHT TOE.

STANDARD THRESHOLD SHIFT-STS-PER CALL,OCCUPATIONAL HEARING LOSS OF 10 OR MORE DECIBELS.

EMPLOYEE WAS MOVING/LIFTING POWER CABLE WHEN HE STRAINED HIS BACK.

EMPL WAS CUTTING LINE FOR SURVEY SHE DETECTED SOMETHING ON HER ARM AND SAW IT WAS AN INSECT OR SMALL LIZARD SHE BECAME DISTURBED AND DURING THE ENSURING CONFUSION SHE LACERATED HER L ARM WITH A MACHETE

EMPLOYEE WAS LAYING PIPE ON NORTH TAILINGS WHEN HE FELT PAIN IN HIS LOWER BACK.

STANDARD THRESHOLD SHIFT (STS).

EMPLOYEE AND CO-WORKER WERE CUTTING TREES USING A MACHETE. THE INJURED EMPLOYEE DID NOT HEAR THE WARNING TO CLEAR THE LINE AND WAS STRUCK ON HIS RIGHT SHOULDER BY A SMALL TREE.

STANDARD THRESHOLD SHIFT STS

STANDARD THRESHOLD SHIFT STS

STANDARD THRESHOLD SHIFT STS

EMPLOYEE WAS PUSHING AGAINST THE BED OF A VEHICLE WHEN HE STRAINED HIS BACK.

DUMPING WATER OUT OF MOP BUCKET L HAND SLIPPEDCAUSING ALL THE WT TO FALL ON HER R HAND STRAINING HER R ARM.

EE WAS USING A 1 1/2 WATER HOSE AND AS SHE ADJUSTED THE POSITION OF THE HOSE, SHE FELT PAIN IN HER SIDE BACK.

EMPLOYEE WAS INSTALLING A T HRUST COLLAR ON A PUMP BARREL SHAFT AS HE WAS LIFTING THE COLLAR HE FELT A SHARP PAIN IN HIS LOWER BACK

WELDING PUMP SLED IN PUMP CREW SHOP. PHONED NURESE TO REPORT EYE BURNING AND WATERY. TREATED FORFLASH BURNS TO BOTH EYES

EMPLOYEE HAD GOTTEN A 2IN DRAG CABLE WRAPPED AROUND RIGHT REAR AXLE WHILE TRYING TO GET IT LOOSE THE CABLE TRIED TO UNWIND & PULLED EMPLOYEE OVER THE AXLE STRAINING HIS BACK

EMPL WAS REMOVING PUNCH LOCK CLAMP FROM HEADER NIPPLE USING SCREWDRIVER. AS HE INSTERED SCREWDRIVER BETWEEN CLAMP & HOSE SCREWDRIVER SLIPPED LACERATING RIGHT FOREARM.

STEPPING DOWN FORM CAB OF TRUCK STRPPED ON S ROOT CAUSING TO TWIST R ANKLE.

STANDARD THRESHOLD SHIFT. HEARING LOSS.

EMPL DOES NOT KNOW HOW OR WHEN ACCIDENT OCCURRED. WEATHER CONDITIONS WERE WINDY & THERE WAS CONTRACTORS WORKING IN AREA DOING SANDBLASTING.

IN BELLY PAN OF TRACTOR IN SQUATTING POSTION LEANIG FORWARD TYING TO REMVOE WINCH PUP WHEN HE TWISTED BACK.

EMPL TRYING TO OPEN VENT WINDOW INSTIDE PICKUP TRUCK WHEN IT BROKE,LACERATING EMPL RIGHT LITTLE FINGER.

EMPLOYEE & A COWORKER WERE PLACING SCAFFLING BOARDSK ON THE BOOM OF A DRAGLINE WHEN EMPLOYEE PLACED HIS RT HAND ON ANGLE FOR SUPPORT & HIS COWORKER PUSHED THE BOARD FROM OTHER END CAUSING EMPL OYEES RT THUMB TO BE CAUGHT BETWEEN THE END OF THE BOARD & THE ANGLE BRACE

EMPLOYEE WAS DESCENDING STEPS ON DRAGLINE WHEN HE SLIPPED AND FELL,SPRAINING HIS LEFT ANKLE.

EMPLOYEE WAS LIFTING THE CONTROL HANDLES TO INSTALL ON THE FRONT OF THE DRILL PRESS WHEN HE FELT A SHARP PAIN IN HIS UPPER BACK.

EMPLOYEE WAS STEPPING DOWN OFF A PUMP TO THE GROUND APPROX 14IN WHEN HE FELT PAIN IN HIS LOWER BACK

EMPLOYEE WAS GETTING READY TO POUR ACETIC ACID ON DRAG WHEN HE GOT SOME ON HIS RIGHT INDEX FINGER.

EMPLOYEE WAS LIFTING A PIECE OF STEEL,WEIGHING APPROX 46 1/2 POUNDS,WHEN HE STRAINED HIS LEFT WRIST.

EMPLOYEE WAS USING A 20 POUND HAMMER TO REMOVE BOOM PIN FROM A PC300 EXCULVATOR WHEN HE STRAINED HIS BACK.

EMPL WAS MOVING A DRAG MOTOR USING AN OVERHEAD HOIST EMPL HAD TO RELOCATE THE DRAGLINE HOIST CABLE TO LET THE OVERHEAD CRANE COME TO THE FRONT OF THE MACHINE SO THAT HE COULD PULL THE MOTOR TH E EMPL L LITTLE FINGER WAS CAUGHT BETWEEN THE CABLE AND PINION GUARD ON THE FRONT DRAG MOTOR

OPERATING CHERRY PICKER WHEN ENGINE STALLED CAUSING LOSS OF BRAKES.EMPL JUMPED FROM MACHINE AS IT STARTED ACCELERATING DOWN HILL CAUSING FX TO LEFT ANKLE.

WHILE CHANGING OUT DUMP CABLES ON DRAGLINE BUCKET THE CABLE STRUCK BUCKET RIGGING AND BOUNCED BACK STRIKING EMPLOYEES NOSE CAUSING 1ST AND 2ND DEGREE BURNS

EMPL STATES HE WAS POSITIOING ELECTRICAL POWER CABLE NEXT TO TUB ON #1 DRAGLINE. HE STEPPED ON CABLE & AS HE PUT WEIGHT ON RIGHT FOOT FOOT SLIPPED OF CABLE CAUSING ANKLE TO TWIST.

EMPLOYEE STEPPED ON A ROCK AND TWISTED HIS RIGHT KNEE.

EMPL WAS REMOVING THE HEAD BOLTS FROM A DIESEL ENGINE USING A 1/2" IMPACT WITH A PULL HANDLE THE SOCKET BROKE AND THE TORQUE REACTION FORCED THE MEPL HAND AGAINST A FUEL INJECTOR CAUSING A SCA RAPING WOUND

EMPL OPERATING CUTTING TORCH -BURNED LEFT THUMB.

EMPLOYEE WAS REACHING FOR A PIECE OF STAINLESS STEEL METAL FROM ANOTHER EMPLOYEE WHEN IT SLIPPED LACERATING EMPLOYEE S RIGHT THUMB.

EMPLOYEE WAS GETTING A BOX DOWN OFF A SHELF WHEN IT STARTED TO FALL, CAUSING HIM TO MOVE QUICKLY, STRAINING HIS BACK.

EMPLOYEE WAS WALKING BETWEEN A WORK BENCH AND PARTS WASHER WHEN HIS LEFT FOOT CAUGHT IN A AIR HOSE CAUSING HIMN TO FALL FORWARD LANDING ON HIS LEFT SHOULDER.

EMPLOYEE STATES HE HURT HIS BACK EITHER EXITING THE BOAT OR CLIMBING UP THE BANK

EMPLOYEE WAS LIFTING A TOOL BAG FROM THE TRUCK BED WHEN HE FELT A STING IN HIS LEFT SHOULDER.

EMPLOYEE AND A CO-WORKER WERE TURNING A 20" GATE VALVE,REACHING OVERHEAD AND PULLING DOWNWARD WHEN EMPLOYEE STRAINED HIS BACK.

WHILE PULLING PUMP PACKING USING A PACKING PULLER T-HANDLE BROKE JAGGED EDGE OF HANDLE CUT EMPLOYEES HAND DURING HIS REACTION TO THE HANDLE BREAK

EMPL WORKING IN BEE HAVEN BAY SWAMP WHEN CAME IN CONTACT WITH POISON IVY.

EMPL WAS SITTING ON SYN MOTOR WHEN HE TURNED TO DISMOUNT FROM MOTOR. HE STEPPED ON EDGE OF WALKWAY & IN DOING SO TURNED HIS RIGHT ANKLE.

EMPLOYEE WAS CROSSING OVER BELT VIA CROSS OVER PLATFORM AND GOT HER RIGHT FOOT CAUGHT IN BETWEEN THE STEPS AND FELL FORWARD CAUSING HER TO STRAIN HER RIGHT KNEE.

EMPL SECURING WOODBLOCKING UNDER SECTION OF STEEL PIPE IN NO.2 MATRIX LINE WHEN EARTH BELOW BLOCKING GAVE WAY CAUSING PIPE TO SLIEDE,STRIKING EMPL ON OUTSIDE OF RIGHT KNEE.

EMPLOYEE STATES THAT HE WAS ASSISTING IN LIFTING A FLAT BOTTOM 14' FIBERGLASS BOAT WHEN HE FELT A PAIN IN HIS LOWER BACK.

EMP AND CO WORKERS WERE CUTTING DOWN TREES WHEN AN ENTANGLED VINE STRUCK THE IN EMP IN THE BACK AND RIGHT ARM

WHILE CUTTING HEAVY BRUSH WITH MACHETE, EMPL STRUCK THICK BASE OF BRUSHH & VIBRATION FROMM IMPACT CAUSED HIM TO LOSE HIS GRIP. MACHETE RICHOCHETED & CUT HIS RIGHT INDEX FINGER KNUCKLE.

EMP WAS STEPPING DOWN FROM T HE BACK OF A FLATBAED TRUCK WHEN HE TWISTED HIS FEFT ANKLE

INJURED EMPL WAS OPENING STOARGE BIN DOOR ON LINE TRUCK WHILE CO-WORKER WAS PUTTING DOWN OUTREIGGERS. AS OUTRIGGERS CAME DOWN ONE OF THEM STRUCK IN JURED EMPL ON HIS RIGHT FOOT.

EMPLOYEE WAS PUSHING AGAINST THE BOTTOM OF A VERTICAL GUIDE ROLLER TO LINE UP SHAFT WHEN HE FELT PAIN IN HIS LEFT SHOULDER

EMPLOYEE STATES AS HE WAS OPENING DRAIN VALVE USING A PIPE WRENCH WITH CHEATER BAR, HE STRAINED HIS LEFT SHOULDER.

EMPL STATES THAT HE WAS USING 12 LB SLEDGE HAMMER TO DRIVE BUSHING IN PUMP HOUSING & FELT PAIN IN HIS LEFT SHOULDER.

EMPLOYEE WAS REPLACING THE GUARD OVER THE DRAG COUPLING WHEN IT SLIPPED AND FELL ON HIS RIGHT FOOT.

EMPLOYEE AND A CO-WORKER WERE BACKFILLING A SPILLWAY USING A PORTABLE DIRT TAMPER. THE MACHINE STARTED SPRAYING MOTOR OIL CAUSING THE INJURED EMPLOYEE TO FALL STRIKING HIS RIGHT KNEE ON THE DI RT TAMPER.

EMP. WAS LIFTING A ROTOR ASSEM BLY TO HANG ON HTE FRAME OF A VEHICLE WHEN HE FELT PAIN IN HIS BACK.

THE EMPLOYEE WAS ON HIS BACK HOLDING A NUT ON THE BOTTOM SIDE OF A HOIST GEAR BOX A CO WORKER WAS ON THE TOP SIDE REMOVING THE RACHET FROM THE NUT, WHEN T HE ADAPTER FELL, STRIKING THE EMPLOYE THE MOUTH.

EMPLOYEE WAS CUTTING BEARINGS OFF OF A PINION SHAFT USING A TORCH WHEN HE BURNED HIS LEFT THUMB.

EMPLOYEE HAD STOPPED THE PAN HE WAS OPERATING TO CHECK A SLACK TIRE WHEN THE PAN FOLLOWING HIM HIT HIM IN THE REAR CAUSING HIM TO BE THROWN FROM HIS PAN THE DOOR LATCH STRUCK HIM IN THE LOWER RT BACK JUST ABOVE THE BELT

EMPLOYEE WAS OPENING WATER VALVE TO CHANGE TUNNEL WATER FROM OPEN DITCH TO FLOAT PLANT WHEN HE FELT PAIN IN HIS ABDOMEN EMPLOYEE WAS TREATED FOR INGUINAL STRAIN

EMPLOYEE STATES THAT HE WAS PICKING UP A BOX OF WELDING WIRE WEIGHING APPROXIMATELY 26 POUNDS WHEN THE BOX SLIPPED FALLING ON HIS RIGHT AHND.

EMPLOYEE WAS PICKING UP AN IMPELLER HANGER FROM THE BACK OF A FLAT BED TRUCK WHILE STANDING ON THE GROUND THE EMPLOYEE GRASPED THE HANGER WITH BOTH HANDS HIS RT.HAND SLIPPED OFF & THE HANGER P INCHED HIS LEFT INDEX FINGER BETWEEN THE HANGER & THE TRUCK BED

EMPLOYEE WAS CHANGING THE SAMPLE BAG ON ROUGHER CONCENTRATE LINE AND AS HE STOOD UP HE STRUCK THE BACK OF HIS HARD HAT ON THE CONCENTRATE LINE.

EMPLOYEE WAS MOVING A WHEELBARROW LOADED WITH BEARINGS, WHEN THE LOAD SHIFTED CAUSING EMPLOYEE TO TWIST HIS RIGHT ANKLE.

EMPLOYEE AND CO-WORKER WAS TIGHTENING THE BOLTS ON AN AIR CONDITION GEAR BOX. THE EMPLOYEE WAS LAYING ON HIS BAK HOLDING THE WRENCH ON A NUT. THE CO-WORKER WAS ABOUT TO STRIKE THE WRENCH WIT H A SLEDGE HAMMER, WHEN THE EMPLOYEE FLINCHED. THE WRENCH SLIPPED AND FELL STRICKING THE EMPLOYEE ON THE RIGHT SIDE OF HIS FACE.

EMPLOYEE WAS CUTTING SURVEY LINES USING A MACHETE WHEN HE GOT A THORN IN HIS LEFT INDEX FINGER

EMPLOYEE WAS USING A 12 LB SLEDGE HAMMER TO TIGHTEN LOCK NUT ON A SHAFT BEARING WHEN HE FELT PAIN IN HIS RT ARM

EMPLOYEE STATED THAT WHILE ROTATING TROMMEL SCREENS HE STARTED HAVING PAINS IN HIS LOWER BACK

EMPLOYEE WAS AT7ACHING HOOK TO RAILROAD HOPPER CAR WHEN HIS LEFT AHND SLIPPED AND WAS CAUGHT BETWEEN HOPPER CAR AND THE HOOK.

EMPLOYEE WAS ST1ANDING ON EQUIPMENT DECK WITH HIS RT.FOOT UNDER PADDLE SHAFT ASSEMBLY AS EMPLOYEE TURNED TO HIS LEFT TO GET A WRENCH FROM TOOL BUCKET HE FELT A SHARP PAIN IN H IS RT.ANKLE

EMPLOYEE WAS WA5KING ACROSS AN 8" WATER LINE TO KEEP FROM WALKING IN WATER, WHEN SHE LOST HER BALANCE, STRIKING HER LEFT HAND ON A CROSS BEAM.

EMPLOYEE WAS AT7EMPTING TO TIGHEN LOOSE SCREW IN CHAIR ARM WITH POCKET KNIFE. AS HE APPLIED PRESSURE THE KNIFE BLADE CLOSE ON FINGER, LACERATING HIS LEFT RING FINGER.

EMPLOYEE AND CO3WORKER WAS CHANGING A TOOTH ON A DRAGLINE BUCKET. THE EMPLOYEE HAD ONE END OF THE TOOTH AND THE CO WORKER HAD THE OTHER. THE CO WORKER END DROPPED LEAVING THE EMPLOYE EHOLDING THE TOOTH BY H3MSELF. EMPLOYEE STATES THAT IS WHEN HE FELT PAIN IN HIS BACK.

EMPLOYEE WAS LI0TING A PORTABLE GAS PUMP BY HIMSELF, WEIGHING APPROX. 50 POUDS, WHEN HE FELT PAIN IN HIS LEFT GROIN AREA.

EMPLOYEE WAS RE4OVING A BOLT FROM THE ROLLER FRAME OF A D8. HE WAS USING A 1 INCH EMPACT WRENCH. HE HAD TO USE AN EXTENSION IN ORDER TO CLEAR THE JACK STAND WHICH CAUSED THE IMPACT WRENCH TO H AVE VERY LITTLE3CLEAREANCE. THE EMPLOYEE ELECTED TO USE A SCREWDRIVER TO ACTIVATE THE SWITCH DUE TO THE SMALL CLEARANCE. WHEN THE BOLT BACKED OUT, THE SCREWDRIVER JAMMED THE TRIGGER AND PINCH

EMPLOYEE AND A 7O-WORKER WERE PULLING A SWING ON #1 DRAGLINE. EMPLOYEE WAS IN THE TUB TAKING THE GEAR OFF THE SHAFT. THE GEAR WAS ON A DOLLY. AS HE ATTEMPTED TO REPOSITION THE DOLLY, THE GEAR SLIPPED OFF A 1IECE OF ALLTHREAD, PINNING HIS HAND BETWEEN THE DOLLY AND THE GEAR.

EMP WAS STEPPIN1 DOWN OFF A FORKLIFT HE WAS OPERATING WHEN HE SLIPPED IN MUD, TWISTING HIS RIGHT ANKLE

EMP HAD CLIMBED3UP LADDER ON SIDE OF A TRUCK BODY AND WAS IN THE PROCESS OF G A SSING UP AIR COMPRESSOR GAS TANK. HE STARTED TO LOSE HIS BALANCE AND ATTEMPTED TO STEADY HIMSELF AND LAID HIS LEFT HAND ON TH9 AIR COMPRESSOR ENGINE MUFFLER CAUSING 1ST & 2ND DEGREE BURNS TO HIS LEFT HAND

EMPLOYEE WAS DI8CONNECTING A HYDRAULIC PIPE LINE UTILIZING A SPUD WRENCH AND A RATCHET.AS HE APPLIED FORCE TO THE NUTS AND BOLTS, THE SPUD WRENCH SLIPPED STRIKING THE EMPLOYEE ON THE RIGHT SID E OF HIS LOWER 5IP.

EMPL REMOVING 13SECTION OF G1W LSA 44 PUMP STUFFING BOX.LIFTING IT OUT -70 LBS-FELT SHARP PAIN IN LOWER BACK.

EMPLOYEE WAS LO2SENING THE BOLTS THAT CONNECT THE SECONDARY CABLES ON THE 1250 HORSE POWER MOTOR. WHEN THE EMPLOYEE WAS APPLYING PRESSURE TO THE BOLT, HE STRAINED THE MUSCLES IN HIS NECK.

EMPLOYEE WAS UN5OADING BALES OF HA Y AT AN AREA WHERE THEY WERE PLANTING GRASS SEED WHILE HE WAS UNLOADING ONE OF THE BALES HE FELT SOMETHING PULL IN HIS CHEST

EMPLOYEE WAS R9POSITIONING A CHUTE MADE OF ABRASION RESISTANT PLATE, USING A PLATE DOG, TO WELD ON IT. THE PLATE DOG SLIPPED OFF THE CHUTE AND STRUCK THE EMPLOYEE IN THE MOUTH. THE EMPLOYEE W AS TAKEN TO LAK9 SHORE HOSPITAL WHERE HE RECEI-VED THREE INTERNAL SUTURES TO THE LOWER RIGHT LIP AND SIX EXTERNAL SUTURES TO THE LOWER RIGHT LIP.

EMPLOYEE WAS RE4OVING CYLINDER LINERS FROM AN ENGINE USING A LINER PULLER THE WRENCH ON THE PULLER SLIPPED AND THE EMPLOYEES RT INDEX FINGE STRUCK A HEAD BOLT

EMPLOYEE WAS WA5KING TO SCRAP YARD TO GET A 10IN PIECE OF PIPE WHEN HE STGEPPED ON A ROUND OBJECT CAUSING HIM TO FALL ON HIS LEFT H IP & ELBOW

EMPLOYEE STATED3THAT HE WAS SETTING CYCLONE ON BACK OF TRUCK WITH THE CRANE.THE CYCLONE SPUN AROUND CAUSING THE EMPLOYEE TO JUMP FROM THE TRUCK.EMP EMPLOYEE STUCK 2IS HAND OUT TO BREAK HIS FALL,AND HIS WRIST STRUCK THE PIPE.

EMPLOYEE WAS CU7TING IN THICK UNDERBRUSH ANDCAME IN CONTACT WITH A WASP NEST.

EMPLOYEE WAS US3NG A COME ALONG TO PICK UP A PIPE WHILE CHANGING CYCLONE INLET ADAPTER WHEN THE EMPLOYEE SWITCHED THE LEVER ON THE COMEALONG TO THE DOWN POSITION, THE HANDLE STARTED SPINNING A ND AROUND AND S7RUCK THE EMPLOYEE ON THE RIGHT HAND, RESULTING IN AN ABRASION AND ABRASION AND CONTUSION.

THE EMPLOYE HAD3PARKED THE GRADER FOR LUNCH. HE REMOVED HIS ASHTRAY TO SEE IF IT WOULD ALLOW MORE AIR FLOW THROUGH THE AIR CONDITIONER DUCT. HE STUCK HIS HAND DOWN IN THE OPENING AND STRUCK TH E FAN BLADE. TH9 TIP OF THE EMPLOYEE S LEFT MIDDLE FINGER WAS PARTIALLY AMPUTATED AND REQUIRED 8 SUTURES.

EMPLOYEE WAS CL9ANING A HUB IN A PARTS WASHER.THE HUB SHIFTED AND THE PARTS WASHER STARTED TO TURN OVER.THE EMPLOYEE CAUGHT THE PARTS WASHER AND SET IT BACK UP AND STRAINED HIS BACK.

EMPLOYEE WAS PU5LING CLX CABLE ON THE #3 DRAGLINE.EMPLOYEE PULLED AN EXCESS AMOUNT OF CABLE OFF THE REEL,TURNED TO GET HELP AND TRIPPED OVER THE EXCESS CABLE.AS THE EMPLOYEE ATTEMPTED TO CATCH HIS BALANCE HE 8TRUCK THE JAGGED EDGE OF A CAN OF CIRCUIT BREAKER OIL.EMPLOYEE WAS TAKEN TO THE LAKELAKE CITY EMERG. CENTER WHERE HE RECEIVED 10 SUTURES.

EMPLOYEE WAS LO2KING FOR A TOOL IN A TRUCK TOOL BOX. A PLUG DRAIN VALVE ON AN AIR COMPRESSOR HAD BEEN LEFT OPENED BUT WAS PLUGGED WITH TRASH. THE COMPRESSOR BUILT UP PRESSURE BLOWING THE PLUG OUT, KNOCKING 9MPLOYEE S GLASSES OFF, FILLING HIS EYES WITH SAND AND DEBRIS. EMPLOYEE WAS TAKEN TO THE LAKE CITY EMERGTICENTER AND WAS TREATED FOR CORNEAL ABRASION TO LEFT EYE.

EMPLOYEE WAS RE4OVING BATTERIES AND PARTS FROM A SEMI TRAILER AND PLACING THEM IN THE BED OF A PICK UP TRUCK. SHE LIFTED SEVERAL ITEMS WEIGHTING 30-60 LBS. WHEN FINISHED WITHT HE WORK, THE EMP LOYEE COMPLAINE8 OF PAIN IN THE LOWER BACK. EMPLOYEE WAS SEEN BY THE COMPANY NURSE, SENT TO A DR WHO RECOMMENDED 5 DAYS BED REST.

EMPLOYEE WAS AT7EMPTING TO HOOK A FORK LIFT HOIST THROUGH A PAD EYE ON TOP OF AN ELECTRIC WELDER. THE PAD EYE WAS SMALL AND THE EMPLOYEE WAS HOLDING THE HEADACHE BALL WITH HIS RIGHT HAND AND PUT THE HOOK T2ROUGH THE PAD EYE WITH HIS LEFT HAND. WHEN THE MECHANIC HOISTED DOWN, THE HEADACHE BALL PINCHED HIS RIGHT MIDDLE FINGER ON THE PAD EYE RESULTING IN A LACERATION TO THE RIGHT MI

EMPLOYEE WAS LO5DING PINION SHAFT ON FLAT BED TRUCK, HE PUSHED ON BOTTOM OF SHAFT TO GET IT INTO THE RIGHT POSITION ON THE TRUCK. THE NEXT MORNING, EMPLOYEE NOTICED PAIN IN HIS LEFT SHOULDER. ON 2-18 THE EMP5OYEE WAS TIGHTENING RACK BOLTS AND THE WRENCH SLIPPED OFF THE HEAD OF THE BOLT. THE EMPLOYEE ALSO EXPERIENCED PAIN AGAIN, WAS SEEN BY OUR NURSE AND SENT TO DR.

EMPLOYEE WAS TO8SING SPILLWAY BOARDS FROM A 55-TON CRANE. EMPLOYEE CAUGHT HISFINGER IN AN EYE BOLT THAT WAS SCREWED ON TOP OF A BOARD. EMPLOYEE WAS TREATED AT THE CLINIC, FAILED TO RETURN FOR A SCHEDULED FO5LOW UP ON 2-5-87, BUT RETURNED ON 6-4-87 COMPLAINING OF PAIN EMPLOYEE WAS THEN SENT TO A PHYSICIAN.

EMPLOYEE AND C2WORKERS WERE CHANGING A 480 VOLT BREAKER THEY THOUGHT THEY HAD SECURED THE CIRCUIT AND THE EMPLOYEE TESTED THE CIRCUIT WITH A WIGGY TESTER IT SHOWED NO VOLTAGE THE EMPLOYEE THE N SHORTED ONE 1HASE WITH HIS SCREWDRIVER AND THE PRIMARY SIDE OF THE BREAKER FLASHED CAUSING SECOND DEGREE BURNS TO HIS RT HAND AND FACE

A SWIVEL YOKE W5S OFF CENTER BETWEEN THE MAST RAILS ON A DRILL RIG.I NAME INSERTED A SMALL PLUG IN PULLDOWN SPROCKET. I REACHED UP WITH MY RIGHT HAND TO FEEL FOR THE PLUG. OPERATOR MOVED PULLD OWN CHAIN SLOWL2 BUT I STILL HAS MY FINGERS ON THE PLUG. AS THE SPROCKET TURNED MY TWO FINGER WERE CAUGHT BETWEEN THE PULLDOWN CHAIN AND SPROCKET. I RECEIVED THREE SUTURES IN TRIGHT MIDDLE FI

EMPL CLOSING TO1 DOOR ON HOPPER CAR WHEN HE LOST HIS GRIP AND DOOR FELL STRIKING LEFT FOOT.EMPL RECD 8 SUTURES.

EMPLOYEE WAS AT7EMPTING TO START BARGE PUMP FROM IN-LINE SUBSTATION EMPLOYEE OPENED DOOR ON SUBSTATION TO DETERMINE WHICH STARTER THE BARGE WAS CONNECTED TO WHILE THE DOOR WAS OPENED THE EMP PUSHED THE STAR7ER WHICH ARCED CAUSING A LARGE FLASH EMPLOYEE RECEIVED 2ND DEGREE BURTNS OF FACE NECK & RIGHT ARM

EE WAS ROTATING3A PUMP SHAFT USING A PRY BAR WHEN IT GOT HUNG ON A COUPLING BOLT CAUISNG HIM TO LOSE CONTROL OF THE SHAFT & PINCHED HIS ELFT HAND BETWEEN THE PRY BAR & THE PUMP PEDESTAL. E E RECEIVED 6 SU7URES.

EMPLOYEE WAS IN8TALLING TRAMMEL SCREENS.WHILE LIFTING SCREEN INTO PLACE,EMPLOYEE GOT HIS 4TH FINGER ON RIGHT HAND CAUGHT BETWEEN THE SCREEN AND TRAMMEL FRAME.

EMPLOYEE WAS RE4OVING A PISTON FROM AN ENGINE HE WAS WORKING ON WHEN ONE OF THE PISTONS SLIPPED BACK DOWN INTO THE LINER CUTTING HIS RT HAND BETWEEN HIS FINGER AND THUMB EMPLOYEE RECEIVED THR EE SUTURES 3

EMPL REMOVING B2LT FROM BOTTOM SIDE OF FLANGE.AS HE WIGGLED BOLT TO FREE IT,PIPE MOVED CAUSING RIGHT MIDDLE FINGER TO BE PINCHED BETWEEN BOLT AND BOTTOM SIDE OF PIPE.

EMP WAS ATTEMPTING TO REMOVE A PIPE SUPPORT FROM A FLATBED TRUCK WHEN IT BECAME HUNG ON OTHER SUPPORTS AS THE EMP STARTED TO PULL ON THE PIPE SUPPORT THE END HE WAS HOLDING DROPPED PINCHING HIS LEFT LITTLE FINGER BETWEEN THE PIPE SUPPORT AND THE TRUCK BED

EMPLOYEE ALONG WITH CO WORKERS WERE SETTING INTERMEDIATE SWING GEAR WHEN THE CHAIN SLIPPED ON OUTSIDE OF GEAR, STRIKING EMPLOYEE ON THE RIGHT HAND.

EMPL DISMOUNTING DOZER WHEN HIS FOOT SLIPPED CAUSING HIM TO HIT LEFT ELBOW ON TRACK OF DOZER.EMPL RECEIVED 5 SUTURES.

EMPLOYEE WAS REPAIRING SWING GEAR. HE HAD SET A DRUM PAN OFF 1 SWING UNIT ON TOP OF LARGE SWING BULL GEAR HE THENW ENT AROUND PAN TO TAKE THE CHAIN OFF WHEN HE MISSED HIS FOOTING AT EDGE OF S HOE AND FELL TO THE GROUND. HE STRUCK THE CORNER OF THE PAN CUTTING THE INSIDE OF HIS RIGHT UPPER LEG.

EMPL AND CO-WORKER OFF LOADING UPPER BALE CHAIN FROM FLAT BED TRUCK.THEY ELECTED TO DRAG BALE CHAIN ABOUT 450 LBS OFF BACK OF TRUCK FAR ENOUGH TO LET CHAINS WEIGHT FINISH PULLING IT OFF.AS CHA N BEGAN TO FALL EMPL STEPPED BACK TO CLEAR HIMSELF FROM FALLING CHAIN AND TRIPPED AND FELL LANDING ON HIS RIGHT PALM FX RIGHT WRIST.

EMPLOYEE WAS FABRICATING FLANGES FROM 3/8" PLATE. AFTER COMPLETING OUT A FLANGE, THE FLANGE AND A SECTION OF SCRAP METAL FELL, GLANCING OFF THE SAWHORSE LEG AND STRUCK THE EMPLOYEE ON TOP OF H IS LEFT FOOT CAUSING A PUNCTURE WOUND. EMPLOYEE RECEIVED THREE SUTURES.

INJURED EMPLOYEE WAS ASSISTING IN CHANGING OUT DRAG CABLES ON #2 DRAGLINE INJURED EMPLOYEE WAS HOLDING A BACK-OUT PUNCH WHILE ANOTHER EMPLOYEE STRUCK IT WITH A 20POUND SLEDGE HAMMER TO DRIVE O UT A DRAG CABLE SOCKET WEDGE AS HAMMER STRUCK BACK-OUT PUNCH A SLIVER OF STEEL BROKE OFF PUNCH & STRUCK INJURED EMPLOYEE IN NOSE WHERE IT BECAME EMBEDDED EMPLOYEE RECEIVED 2 SUTURES

WHEN APPLYING PRESSURE WITH HIS FOOT TO A ROOF SHEET A CLAMP CAME LOOSE & THE SHEET SLIPPED CAUSIG I.NAME TO FALL 24\ TO THE GROUND.