Noralyn Metal/Non-Metal

EMPLOYEE STATES HE WAS WALKING DOWN STAIRS & TRIPPED, CAUSING HIM TO FALL & INJURE HIS SHOULDER.

Employee states he was lifting trash can (+50#) and felt pain in back. (has history of back pain) he went to clinic on 7-6-04 and was given rx medicine and placed on modified duty.

EMPLOYEE STATES HE WAS DRILLING HOLE IN METAL BRACKET THAT HE WAS MAKING. DRILL BIT HUNG UP IN BRACKET CAUSING BRACKET TO SPIN AND CUT HIS HAND.

EE STATES HE WAS SCREWING END BELL ONTO 4" PIPE FOR PUMP AND HE FELT PAIN IN SHOULDER.

EE STATES SHE WAS SWEEPING FLOOR AND STEPPED BACKWARDS OUT OF ENTRANCE, CAUSING HER TO TWIST ANKLE DUE TO DIFFERENCE IN ELEVATION. PLACED ON RESTRICTED DUTY.

EE STATES HE WAS CARRYING PIECE OF STEEL WEIGHING APPROX 50 LBS AND FELT PAIN IN BACK. HAS BEEN UNDER DOCTOR'S CARE FOR BACK INJURY 8 YEARS AGO. NOT REPORTED UNTIL 1-17-03. STILL UNDER INVESTI GATION.

EMPLOYEE STATES HE WAS REMOVING BEARING RACE WITH HAMMER AND CHISEL & STRUCK HAND WITH HAMMER.

PUTTING BLADE ON TRACTOR, GOT HIS FINGER BETWEEN BLADE AND FRAME.

EE STATES HE WAS MOVING SHAFT ON DRILL PRESS TABLE AND IT FELL OFF THE TABLE, STRIKING HIM ON THE FOOT BEHIND STEEL TOED BOOTS.

EE STATES THAT HE WAS HOSING DOWN SHOP FLOOR ANDFELT SOMETHING GET IN HIS EYE. WAS GIVEN PRESCRIPTION FOR EYE INFECTION IN DAYS FOLLOWING INCIDENT. (WAS UNDER INVESTIGATION).

EMPLOYEE STATES HE WAS WALKING IN FAB SHOP AND TWISTED KNEE. MAN HAD SURGERY ON KNEE IN SEPTEMBER. A RECENT AUDIT HAS DETERMINED THAT THE SURGERY MAY BE RELATED TO THE MARCH 2002 INJURY.

EE STATES HE WAS WALKING ON CONCRETE PAD AND SLIPPED CAUSING HIM TO FALL APPROX. 4'. HIS ARM STRUCK FRAME WHILE FALLING. PLACED ON RESTRICTED DUTY ON 10-11-01. ACCIDENT HAS BEEN UNDER INVESTIG ATION.

EE STATES HE THINKS HE GOT HIT IN FACE BY SPARKS FROM WELDING DONE BY CO WORKER. HE HAD FOREIGN MATERIAL IN RIGHT EYE. DIRT, ETC WAS REMOVED AND MAN WAS GIVEN PRESCRIPTION MEDICATION TO PREVEN T INFECTION.

(UPDATED TO REPORTABLE ON 8-15-01) EMPLOYEE STATES HE WAS ROLLING A PIECE OF ANGLE IRON (3/8 X 4"X 4" X 20') OFF A BUNDLE, AND FELT PAIN IN RIGHT SHOULDER.

EMPLOYEE STATES HE WAS SWINGING A SLEDGE HAMMER, MISSED TARGET AND TWISTED KNEE. PLACED ON RESTRICTED DUTY 3/13/01.

EE HAD HIS HAND ON AN IMPELLER BEING MOVED WITH A CHAIN AND PINCHED FINGER BETWEEN CHAIN AND IMPELLER.

EE STATES HE WAS REMOVING SHAFT WITH HAMMER & CHISEL WHEN HAND SLIPPED & HE CUT HIS FINGER ON IMPELLER. LACERATION WAS GLUED TOGETHER IN LIEU OF SUTURES

EE STATES HE WAS USING A PRYBAR TO MOVE PUMP LINER AND LOAD SHIFTED CAUSING PRYBAR TO PRESS AGAINST LEFT ANKLE AND FOOT. PLACED ON RESTRICTED DUTY.

EE STATES HE WAS STUNG BY A WASP AND HAS AN ALLERGIC REACTION. ANAPHYLACTIC SHOCK WAS TREATED AT HOSPITAL.

EE STATES HE WAS REACHING FOR OBJECT IN BED OF TRUCK AND CUT KNUCKLE ON SHARP OBJECT. FINGER HAD MEDICAL GLUDE APPLIED TO CLOSE WOUND IN LIEU OF SUTURES.

EE STATES HE WAS WORKING IN PLANT & GOT SOMETHING IN EYE. RX & 1 DAY RESTRICTED DUTY

EE STATES HE WAS WALKING AND STEPPED UP ON A PALLET AND TWISTED HIS KNEE. (HAS BEEN BEING RESEARCHED) LATER PLACED ON RESTRICTED DUTY.

EE STATES HE WAS STRUCK BY SHAFT OFF ROLL OF CONVEYOR BELT THAT WAS BEING UNROLLED ONTO BELT STRUCTURE. BELT BEGAN UNROLLING TOO FAST AND SHAFT FELL FROM THE SUSPENDED LOAD ON BELT INCLINE AND BOUNCED & STRUCK MAN ON RIBS & BACK.

EE STATES HE WAS CARRYING BUCKET AND FELT PAIN IN LEFT SHOULDER. LATER PLACED ON RESTRICTED DUTY. HAS BEEN UNDER REVIEW.

EE STATES HE BENT OVER TO PICK UP TOOLS AND FELT PAIN IN BACK. PLACED ON RESTRICTED DUTY BEGINNING 11/19/99.

EMPLOYEE STATES HE STEPPED INTO A SOFT SPOT WHILE WALKING AND FELT PAIN IN HIS LEFT KNEE. HE PREVIOUSLY HAD SURGERY ON THIS KNEE. (RESTICTIONS AND PRESCRIPTION).

EE STATES HE WAS CLIMBING STAIRS AND STRUCK HEAD ON 1" PIPE CAUSING NECK STRAIN. WAS GIVEN PRESCRIPTION MEDICATION ON 10-13-99.

EE STATES THAT HE SLIPPED IN MUD AND TWISTED HIS RIGHT KNEE.

EE STATES THAT HE BENT OVER TO LIFT A PIECE OF METAL AND FELT PAIN IN BACK. MAN WAS GIVEN PRESCRIPTION MEDICATION. ACCIDENT HAS BEEN UNDER INVESTIGATION.

EE STATED HE WAS STANDING ON A LARGE MATRIX PIPE AND SLIPPED AND FELL, CAUSING HIM TO INJURED HIS TAILBONE.

EMPLOYEE STATES SHE WAS LIFTING BUCKET OF SLIME SAMPLES AND FELL AGAINST BED OF TRUCK CAUSING FRACTURE OF RIB. DID NOT REPORT INJURY UNTIL 9 DAYS AFTER IT ALLEGEDLY OCCURRED. INCIDENT HAS BEEN UNDER INVESTIGATION.

EE STATES HE WAS WALKING FROM PARKING LOT & TWISTED RIGHT KNEE RESTRICTED DUTY

EE STATES THAT HE WAS CLOSING VALVE ON PUMP AND HAND SLIPPED CAUSING HIS RT. THUMB TO HYPER-EXTEN BACKWARDS TOWARDS HIS WRIST. THUMB WAS NOT FRACTURED BUT WAS IMMOBILIZED WITH SPLINT BY A PHYS ICIAN.

EMPLOYEE STATES THAT HE PUT CABLE ON WINCH AND THE CABLE CAME LOOSE AND STRUCK HIM ON THE RIGHTINDEX FINGER CAUSING A FRACTURE.

EMPLOYEE STATES THAT 16" STEEL PIPE BEING INSTALLED ON GROUND SLID OFF WOOD BLOCK AND LANDED ON LEFT FOOT. DIAGNOSED AS SIMPLE FRACTURE ON 7-7-99.

EE STATES HE WAS TIGHTENING BOLTS WITH WRENCH AND FELT PAIN IN ARM. APPRENTLY, MAN HAS GONE TO DR. 2 OR 3 TIMES FOR TESTS SINCE INJURY. ON 10-20, MAN WAS GIVEN PLASTIC SPLINT TO IMMOBILIZE WRI ST AND ALSO PRESCRIPTION FOR MEDICINE.

EE CUTTING 18" PIPLINE LOOSE WHILE RUBBER TIRE TRACTOR PICKING IT UP SO HE COULD CUT BOTTOM BOLTS. WHEN HE CUT 5 BOLTS LOOSE PIPE SLID OFF FORKS OF TRACTOR AND STRUCK INSIDE RT ANKLE Y

EE WAS ADJUSTING VALVES ON 85 HYDRO-UNDERFLOW DISCHARGES. HE STEPPED ON #9 DISCHARGE PIPE AND HIS RIGHT FOOT SLIPPED BETWEEN #4 AND #65 DISCHARGE PIPES, TWISTING HIS RIGHT ANKLE.

EE WALKING IN DRAGLINE SWING/PROPEL COMPARTMENT. WHEN DRAGLINE CHANGED SWING DIRECTION, EE LOST BALANCE AND GRABBED ONTO A GUARD TO STEADY SELF. IN THE PROCESS HE STRAINED RIGHT SHOULDER.

EE WAS GETTING INTO OPERATOR'S CAB ON BOOM TRUCK AND TWISTED HIS LEFT KNEE WHEN HE SLIPPED AND STRUCK LEFT KNEE ON BOOM TRUCK CAB.

EE ASSISTING MECHANIC CHANGE OUT A 22 DEGREE PIPE FITTING. THE FITTING WAS SUPPORTED BY A CRANE. WHEN THE LAST BOLTS WERE REMOVED THE "DOWN SPOUT" (VERTICLE END OF THE FITTING) TURNED SIDEWAYS & STRUCK EE IN RIGHT SIDE CHEST.

EE WAS DRIVING AN ELECTRICLA GROUND ROD INTO THE GROUND. HE WAS HOLDING ROD WITH LEFT HAND AND ROD DRIVER WITH RIGHT HAND. AS HE STRUCK TOP OF ROD WITH DRIVER HIS LEFT THUMB WAS CAUGHT BETWEEN ROD AND DRIVER.

INSTALLING CAM ROLLER ON DRAGLINE WALKING CAM. PIN FELL OUT OF ROLLER & STRUCK EE ON RIGHT SHOULDER.

EE CLEANING OUT CHIP BINS IN THE MACHINE SHOP AND CUT LEFT THUMB ON METAL CHIP/SHAVING. WAS WEARING GLOVES BUT WRONG TYPE.

EE WALKING THROUGH PLANT AREA AND SLIPPED ON ALGAE. HE DID NOT FALL BUT STRAINED HIS RIGHT SHOULDER AS HE CAUGHT HIMSELF.

EE WAS TIGHTENING BOLT WITH SOCKET WRENCH. SOCKET SLIPPED OFF BOLT CAUSING EE TO FALL FORWARD AND STRIKE MOUTH ON PIPE FLANGE.

EE WAS TIGHTENING A STUD ON A PUMP THE STUD ON A PUMP THE STUD THREADS STRIPPED CAUSING EE TO HIT WRIST (RIGHT) ON PUMP PEDESTAL (FRAME)

EE WAS USING A 36" RACHET WRENCH TO TIGHTEN A PIPELINE BOLT. AS HE WAS PUSHING DOWN ON WRENCH THE RACHET SLIPPED CAUSING EE TO LURCH FORWARD AND JAR LOWER BACK. WENT TO DR ON 10/10/98

USING A LOCKBLADE KNIFE TO TRIM THE END OF A PRIMING HOSE, KNIFE SLIPPED AND CUT LEFT THUMB. EE RECEIVED THREE SUTURES AND RESTRICTED DUTY.

WHILE REACHING ACROSS A TABLE THAT HAD JUST BEENUSED FOR WELDING MATERIAL ON, EE LAID HIS HAND ON IT AND BURNED HIS HAND. EE RECEIVED 2ND DEGREEBURNS TO HIS PALM. EE WAS PUT ON RESTRICTED DUTY

EE WAS LOOKING FOR A PIPE FITTING, LOST HIS FOOTING AND FELL ON A SHARP PIECE OF PIPE RESULTING N SIX SUTURES. EE RETURNED TO FULL DUTY.

EMPLOYEE WAS WALKING ACROSS RAILROAD TRACKS AND SLIPPED AND FELL IN ALGAE. EMPLOYEE PUT ON RESTRICTED DUTY.

EE WAS LIFTING ARM-ASSEMBLY ON AN 8" PIT GUN, IT SHIFTED CAUSING IT TO FALL AND STRIKING RIGHT BOOT. EE RECEIVED A HEMATOMA AND CONTUSION TO RIGHT 4TH TOE AND WAS PUT ON RESTRICTED DUTY.

WHILE EE WAS PRYING ON A PIECE OF PLATE BEING CUT FROM CHUTE, IT FLIPPED WHEN IT CAME LOOSE AND STRUCK EMPLOYEE'S ARM. EE RECEIVED A LACERATION REQUIRING SUTURES. EE WAS RETURNED TO FULL DUTY.

EE WAS WALKING FROM THE STAGE PUMP HOUSE TO THE CLEAR WATER MARINA TO SHOW STAGE PUMP OPERATOR A VALVE AT THE WASHER HIGH PRESSURE PUMP. ALGAE WAS BUILD UP BELOW WATER. EE SLIPPED AND FELL ON LEFT SHOULDER AND WAS PUT ON RESTRICTED DUTY. T

EE WAS RIGGING A SLING CHAIN IN DRAG LINE HOUSE AND THOUGHT THAT CHAIN HIT HIM. AFTER A FEW DAYS IT APPEARED A THOUGHT A SPIDER BIT HIM. AN INFECTION SET IN AND THE EE WAS GIVEN PRESCRIPTION M EDICATION AND RESTRICTED WORK DAYS.

WHILE ROLLING IN DRAG CABLE HORN SIGNAL WAS GIVEN TO OPERATOR TO ROL IN DRAG CABLES. WHEN OPERATOR PICKED UP EXPRATION THE DRAG DRUM WENT FULL POWER IN OPPOSITE DIRECTION PUTTING BIG LOOPS IN CABLES HITTING EE KNOCKING HIM DOWN INTO DRAG DRUN AND INTO DRAG PIT. WHILE IN DRAG PIT EE WAS BEING KNOCKED AROUND BY CABLES. EE WAS PUT ON RESTRICTED DUTY.

EES WERE CUTTING UP 24" HYDRAULIC LINE, ONE ON NORTH SIDE OF PIPE & ONE ON SOUTH SIDE. EE ON SOUTH SIDE WAS CLEANING OFF BOLTS BY HITTING THEM WITH WRENCH. EE ON NORTH SIDE WENT TO STEADY HIMS ELF BY PUTTING HAND ON TOP OF PIPE. EE ON SOUTH SIDE SAW EE'S HAND TOO LATE & HIT IT WITH WRENCH.

EE WAS UNCHOKING WITH DISCHARGE PIPE OFF ON WESTINTERMEDIATE SCREEN. EE REACHED RIGHT HAND IN HOLE THAT'S CUT OUT TO UNCHOKE PIPE TO GET GRASS OUT. WHEN HE DID THAT, THE MATERIAL CAME DOWN AND CAUGHT EE'S HAND AND WRIST WITH CAUSED PAIN. EE WAS SENT TO DR AND RETURNED WITH RESTRICTIONS.

WALKING DOWN DIRT INCLINE IN ORDER TO STEP UP ON END OF FLOATING WALKWAY, RIGHT FOOT SLIPPED AS RAISING LEFT FOOT TO STEP UP ON WALKWAY. RIGHT LEG JAMMED AGAINST END OF WALKWAY.

HIT FINGER WITH HAMMER WHILE HITTING KEYSTOCK.

EE WAS CARRYING NIPPLE INTO BIN WHEN FOOT SLIPPED CAUSING HIM TO FALL. HE PINCHED HIS LEFT HAND BETWEEN BOTTOM OF BIN AND NIPPLE. EE RECEIVED FOUR SUTURES TO LITTLE FINGER.

EE WAS DRILLING A REDUCING FLANG WITH AN ELECTIRC DRILL. THE FLANGE WAS NOT SECURED & DRILL SPUN AROUND & STRUCK EE IN LEFT RING FINGER BY BIT. CAUSING LACERATION.

WHILE CLOSING A POLE TOP ELECTRICAL DISSCONNECT SWITCH EMPLOYEES LEFT LITTLE FINGER GOT CAUGHT BETWEEN SWITCH HANDLE AND AN "I" BEAM THE ASSEMBLY WAS ATTACHED TO.

..

EMPLOYEE WAS SITTING IN A CHAIR IN THE OFFICE (CHAIR WITH ROLLERS). HIS FEET CAME OFF OF THE FLOOR, THE CHAIR ROLLED OUT FROM UNDER HIM AND HE STRUCK HIS LEFT ELBOW ON THE FLOOR AS HE FELL TO FLOOR.

EE WAS SQUATTING DOWN CLEANING TRACK UNDER CAR WITH SHOVEL. UPON COMPLETION EE GRABBED SIDE OF CAR WITH HIS LEFT HAND, WITH RIGHT HAND STILL ON SHOVEL HANDLE FOR SUPPORT. EE THEN STARTED TO PU LL HIMSELF TO AN UPRIGHT POSITION. JUST AS HE STRAIGHTENED UP HE FELT A SEVERE PAIN IN HIS LOWER BACK. BACK WENT OUT.

EE WAS PULLING ADAPTER OUT OF TRAILER 029 FOR LIGHTS, THE WIRE HANDLE CAME LOSE AND THE CORNER OF THE WIRE RIPPED THROUGH THE MIDDLE FINGER OF THIS RIGHT HAND.

EE WAS ATTEMPTING TO REMOVE A COMEALONG THAT WAS SUPPORTING A SHEAVE PIN. EE LOST CONTROL OF PIN AND PIN FELL TAKING THE COMEALONG WITH IT. THE HOOK ON THE COMEALONG BOUNCED OFF THE FAIRLEAD W ALKWAY STRIKING EE IN THE RIGHT LEG ABOVE THE KNEE.

EE WAS TRYING TO GRAB LOOSE WATER HOSE AND THE HOSE CLAMP CUT THROUGH THE RIGHT GLOVE.

EMPLOYEE WAS REMOVING SCREEN FROM FRAME FOR CLEANING. WHEN LOWERING THE SCREEN, HER GRIP SLIPPED AND THE SCREEN DROPPED ABOUT 2 1/2 FT. WITH THE CORNER OF IT STRIKING THE TOP OF THE LEFT FOOT .

AFTER DEFROSTING, CLEANING AND REMOVING ALL VISIBLE ICE FROM SMALL REFRIGERATOR, EMPLOYEE SLIPPED ON A PIECE OF ICE AND FELL INTO REFRIGERATOR. EMPLOYEE BRUISED RIGHT LOWER GUM, CUT LOWER LIP, CUT RIGHT JAW AND BRUISED CHIN. REFRIGERATOR ISA COMPACT MODEL, POSITIONED IN A HUTCH, 3 FEET ABOVE FLOOR LEVEL. EMPLOYEE WAS HOLDING DOOR OPENW/ RIGHT HAND AS SHE STEPPED BACK FROM REFRIG.

WHILE REMOVING TRIPPER WHEEL FROM LATHE, KNEE HIT HANDLE ENGAGIN, MACHINE AND PULLING LEFT HAND AGAINST CONTROL BOX.

WHILE GRINDING GEARS UNIDENTIFIED FOREIGN BODIES BLEW INTO LEFT EYE. EMPLOYEE WAS WEARING SAFETY GLASSES AND WELDING SHEILD.

WHILE USING AN IMPACT WRENCH TO INSTALL LOG TEETH AT THE WASHER, SOMETHING GOT INTO THE LEFT EYE. EE WAS WEARING GLASSES WITH SIDESHIELDS. EE THROUGH THE EYE WAS OK, THAT IT WAS JUST DUST, BUT THE EYE WAS WORSE THE FOLLOWING MORNING.

WHILE UNCHOKING CENTER TROMMEL MUDBALL CHUTE AT DOUBLE DECK LEVEL, BLOCKAGE SUDDENLY BROKE FREE AND EE STEPPED BACK QUICKLY. EE'S FOOT WENT INTOOPENING FOR NEXT LEVEL LADDER WHERE WASHER OPERA TOR WAS UNCHOKING ANOTHER SECTION OF CHUTE. AS EE WAS FALLING HE CAUGHT HIMSELF WITH HIS LEFT SHOULDER AND ARM.

ON OR ABOUT 1:00 PM FRIDAY AFTERNOON, I WAS INSTRUCTED BY THE SECTION LEADER TO GO TO KIGSFORD MINE FOR A PROJECT. AFTER DECIDING WHAT EQUIPMENT WAS NEEDED, I STARTED LOADING VEHICLE. I REACHE D UP ON RACK TO LOAD HOSED, A 150 MESH SCREEN WAS HANGING ON RACK. THE 150 MESH SCREEN FELL HITTING ME IN MY MOUTH, CHIPPING FRONT TOOTH AND BUSTING MY LIP.

WHILE HOOKING DOZIER CABLE HOOK TO DRAW BAR ON 417 DOZIER DOZIER WAS STUCK. EE FINISHED, STOOD UP AND HIT HIS HEAD ON THE HORIZONTAL CROSS BAR ON THE A FRAME OF THE DOZIER. THIS PUSHED HIS HEA D STRAIGHT DOWN CAUSING SEVERE PAIN IN HIS NECK.

WHILE WORKING AT WASH RACK CLEANING UP SHEAVES, WEARING STEEL TOED RUBBER BOOTS. SLIPPED AND FELL. GROUND WAS WET AND GREASY AND AT A 5 DEGREE INCLINE.

EMPLOYEE WAS RIDING IN COMPANY VEHICLE HEADING SOUTH ON HWY 555, WHEN HE WAS APPROACHED BY ANOTHER VEHICLE WHICH WAS OUT OF CONTROL DURING A DOWN POUR OF RAIN. THE OTHER VEHICLE (NON COMPANY) HIT COMPANY VEHICLE HEAD ON.

EMPLOYEE WAS RIDING IN COMPANY VEHICLE HEADING SOUTH ON HWY 555, WHEN HE WAS APPROACHED BY ANOTHER VEHICLE WHICH WAS OUT OF CONTROL DURING A DOWN POUR OF RAIN. THE OTHER VEHICLE (NON COMPANY) HIT COMPANY VEHICLE HEAD ON.

WHILE CLEANING WITH WIRE BRUSH, HIT RT MIDDLE FINGER AGAINST 2 " NIPPLE, CUTTING KNUCKLE.

WHILE WORKING AT LOADING DOCK AND BACKING THE CAR VERY VERY SLOWLY. HE WAS SQUATTING DOWN UNDER THE CAR. HE MOVED TOWARD THE EDGE OF DOCK. AS HE STOOD UP, THE LADDER ON THE RAIL CAR WAS EVEN W ITH HIS BODY AND HE STRUCK HIS RIGHT HIP ON THE LADDER. HE CAUGHT ONTO THE LADDER WITH BOTH HANDS TO GET OUT OF THE WAY BUT WAS IN A CNFINED SPACE, LADDER RUNG BUMPED LEFT ARM BENDING WRIST B

WHILE CUTTING WRAPPING OFF A BEARING THAT WAS INTHE BOX, HE WAS CUTTING AWAY FROM HIMSELF, THE KNIFE CUT THROUGH THE WRAPPING SUDDENLY STICKING HIS LEFT THUMB.

EE RECEIVED FLAHS BURN WHILE WELDING, LATER FOREIGN BODY WAS FOUND IN RIGHT EYE.

EMPLOYEE WAS OPENING A LOW PRESSURE WATER LIEN VALVE AND FELT "SOMETHING PULL" IN LEFT HIP.

WHILE AIR ARCHING BOOM CORD ON A DRAGLINE WITH WINDS BLOWING 15 MPH. WINDS BLEW SLAG UP AND INTOTHE LEFT EYE.

EMPLOYEE WAS REMOVING WELDING SLAG FROM A STEELFITTING HE HAD JUST WELDED.

EE WAS WORKING IN VERY WINDY CONDITIONS, FELT FOEIGN MATTER IN LEFT EYE AND WENT TO NURSE IN DISPENASRY, EYE CLEARED OF DIRT AND WASHED OUT. FELT MORE DIRT NOT DETECTABLE BY NURSE.

EE WAS WALKINGUP STEPS TOWARD TANK HOUSE WHEN HE FELT A BURNING IN HIS STOMACH. EE WAS CARRYING A BUCKET OF TOOLS.

EE WAS USING A PRY BAR TO ASSIST IN INSTALLING PROPEL BRAKES ON A DRAGLINE TO ALIGN BRAKES AROUND THEM. THE PRY BAR SLIPPED HITTING EE ON LEFT JAW AND LEFT EYE SOCKET.

ASSISTING FITTING IMPELLER ON PUMP, LIFTING IMPELLER UP WITH HOIST APPROX 30". IMPELLER HUNG UP,BUMPED ON THE HOIST, 2 CLAMPS SLIPPED OFF DROPPING IMPELLOR ON HAND.

CUTTING WITH AIR ARC, DEBRIS BLEW IN FACE AND EYES.

EE WAS GRIDING D/L SWING SHAFT BEARING PLATE WITH DISC GRINDER. DISC CAUGHT THE EDGE OF PLATE AND KICKED BAKC TWISTING IN EE'S HAND. ACTION CAUSED THE DISC TO CUT THROUGHT LEATHER WORK GLOVE A ND EMBEDDING PART OF GRINDING DISC IN LEFT LITTLE FINGER.

ATTEMPTED TO LIFT WASHER LOG BEARING ONTO PALLET, FELT SHARP PAIN LOWER LEFT SIDE OF BACK.

WHILE OPERATING CHERRY PICKER AT WASHER AT NORALYN COMETHING BLEW INTO LEFT EYE. HE THOUGHT HE GOT IT OUT & CONTINUED WORKING. LEFT EYE BECAME PAINFUL THAT NIGHT. HE TOLD ANOTHER EE ABOUT IT O N 8/14/96, & THAT EE THOUGHT HE SAW FOREIGN BODYIN EE'S EYE.

ASSISTING OTHER DISASSEMBLE A GEAR BOX. OTHER WAS STRIKING DOWEL PIN WITH A HAMMER, PIECE OF METAL CHIP FLEW OFF AND STRUCK EE IN THE MOUTH.

WHILE PULLING UP PACKING ON WEST DEBRIS PUMP EMPLOYEE STRUCK TOP OF RIGHT THUMB ON EXPOSED END OF HOSE CLAMP

REMOVING SCREEN PANELS IN CONCENTRATE BIN, USING CHIPPING HAMMER TO REMOVE CUT BOLTS, A PIECE OF METAL FLEW INTO RIGHT SIDE OF NECK. A PIECE OF METAL REAMINED IN NECK CAUSING CONTINUOUS BLEEDI NG.

EMPLOYEE WAS HOLDING A STRONGBACK ON 600 TON PRESS AS ANOTHER POSITIONED A TROMMEL WHEEL IN THE PRESS. WHEEL MOVED STRIKING STRONGBACK AND PINCHING EMPLOYEE'S MIDDLE FINGER BETWEEN WHEEL AND S TRONGBACK.

WHILE DESCENDING VERTICAL LADDER SLIPPED AND FELL ABOUT 6-7 FT ONTO CONCRETE SLAB COVERED WITH 1-2 FT OF WATER AND FROTH. LANDED ON BOTH HEELS.

RIGGING COM-A-LONG TO LIFT BEARING ON PULLY FOR REMOVAL. ANGLE IRON USED FOR SUPPORT BROKE LOOSE & STRUCK EMPLOYEE ON HEAD & BACK.

EMPLOYEE WALKING TOWARD SET OF 3 STEPS WITH COM-A-LONG OVER SHOULDER. LOST HIS BALANCE & FELL HITTING LEFT KNEE ON EDGE OF CONCRETE STEP.

ATTEMPTING TO GUIDE ACETYLENE CYLINDER OFF BACK OF TRUCK, IT DROPPED A FOOT OFF TRUCK,PIVIOTING AND CAUGHT FINGER BETWEEN CYLINDER CAP AND TRUCK BED.

EMPLOYEE WAS WASHING OFF BEARING WHEN SHELL BLEW FEED HIT EMPLOYEEIN THE FACE & LEFT UPPER BODY

EMPLOYEES WERE REPLACING THE BEARING ASSEMBLY ON THE SOUTH DISTRIBUTOR MECHANICS USING COM-A-LONG TO LIFT THE REPLACEMENT UNIT INTO POSITION THE WALL OF THE SOUTH DISTRIBUTOR WHERE THE LOAD CH AIN OF THE COM-A-LONG WAS HOOKED SUDDENLY COLLAPSED & THE BEARING ASSEMBLY FELL EE LEFT HAND MIDDLE & RING FINGERS WERE CAUGHT BETWEEN THE FALLING BEARING ASSEMBLY & A SECTION OF ANGLE IRON A

BUSHING SET ON FLOOR ROLLED OVER & LACERATED RT HAND RING FINGER NOT WEARING LEATHER GLOVES& NOT USING OVERHEAD LIFTING EQUPMENT

HOLDING BOTTOM OF CHUTE WHILE COME A LONG WAS LETTING CHUTE DOWN CHUTE WAS SHARP ON DISCHARGE END.

CLEANING 18" HAZELTON PUMP USING STRAIGHT GRINDER WITH WIRE WHEEL ATTACHED; HAND GOT HUNG UP AND FORCED AGAINST SIDE OF HOUSING.

USING HAND GRINDER WITH A WIRE BRUSH TO CLEAN SHIM. BRUSH CAUGHT IN HOLE OR EYE OF SHIM AROUND HAND. GLOVES WORN.

EMPLOYEE WAS DRILLING A 1/4" CHANNEL IRON. DRILL SLIPPED OFF CENTER HOLE & CAUGHT SLEEVE OF SHIRT TEARING SKIN OF RIGHT FOREARM.

STEPPED OVER MATRIX LINE AND HIS LEFT FOOT HIT UNEVEN GROUND CAUSING EMPLOYEE TO TWIST LEFT LEG AND LOWER BACK. (SURGERY 1-27-94)

EMPLOYEE WAS PUTTING STOPPER IN 250 ML FLASK, NECK OF FLASK BROKE CUTTING EMPLOYEE'S RIGHT INDEX FINGER.

USING PORTABLE GRINDER WHEN WOODEN HANDLE ON SHAFT TURNED CAUSING BLADE TO HIT AND CUT LEFT WRIST.

EMPLOYEE REMOVING PLUG FROM BALL MILL DOWN PIPE PLUG FELL OFF EMPLOYEE TRIED TO CATCH IT CATCHING HIS HAND BETWEEN HANDRAIL & PLUG

EMPLOYEE FELL 12 FEET FROM A PIPE SUPPORT BEAM TO THE GROUND WHEN A SECTION OF PIPING BEING REMOVED STRUCK HIM AND KNOCKED HIM OFF THE BEAM. HE WAS WEARING A SAFETY BELT/LANYARD AND WAS ATTACH ED TO A BOLT HOLE IN THE SUPPORT BEAM. THE FORCE OF THE BLOW TO THE EMPLOYEE TORE THE LANYARD HOOK OUT OF THE I-BEAM.

EMPLOYEE ATTEMPTED TO CROSS SMALL DITCH BETWEEN C AND B TRACKS. EMPLOYEE TRIPPED ON A ROCK IN DITCH, CAUSING HIM TO FALL. EMPLOYEE RELEASED RAILROAD BAR IN HIS HAND, TO BRACE HIS FALL, THE RAI LROAD BAR LANDED ON TOP OF HIS RIGHT HAND. EMPLOYEE WAS WEARING GLOVES.

54736YEE WAS CHANGING OUT CENTER HAMMERMILL ROTATING ELEMENT, AT THE LAST STAGE OF JOB HANGING OFF-SET CHUTE WITH BMC. EMPLOYEE NEEDED TO GET TO OTHER SIDE OF BMC TO RIG COME-ALONG TO CHUTE. S 35775D ON BMC WITH COME-ALONG IN BOTH HANDS, LEFT FOOT SLIPPED OFF BMC CAUSING EMPLOYEE TO STRIKE LEFT LOWER LEG ON BMC.

INSTALLING TRANSMISSION INTO #495 CRANE. WHILE MOUNTING TRANSMISSION ONTO LIFT JACK,EMPL PREPARD TO CHAIN & SECURE TRANSMISSION WHEN THE UNIT FELL OFF JACK,PINCHING EMPL LEFT THUMB BETWEEN JAC K AND TRANSMISSION CASE.

EMPL ASSEMBLING 6" PIT GUN.WHILE TIGHTENING HEADS OF BOLTS THE 1/2" SWIVEL & SOCKET WAS BINDING UP AGAINST VERTICAL PIT GUN SWIVEL SECTION CAUSING IMPACT SWIVEL & SOCKET TO COME OFF HEAD OF BO LT STRIKING EMPL ON MOUTH.

WHILE IN PROCESS OF REMOVING THRUST BEARING FROM COLLAR,BY TAPPING LIGHTLY WITH HAMMER,A PICE FROM BEARING SHATTERED OFF AND STRUCK EMPLOYEE IN RIGHT KNEE.

EMPLOYEE STATES HE WAS TAKING CLIP OFF WEAR-BAD WITH HAMMER.ONE CLIP HIT THE SMALL STEEL TABLE ON THE SIDE AND FLEW BACK AND HIT HIM IN THE MOUTH.

EMPLOYEE HAD ABOUT 1 GALLON OF SURTAC LEFT IN A FIVE GALLON CAN.HE BEGAN TO POUR THIS ON THE DRAG GEAR AND GOT HIS LEFT HAND TOO CLOSE TO THE TEETH,THEY CAUGHT HIS GLOVE AND PULLED HIS AHND IN TO THE GEAR.THE GEARS CUT HIS INDEX AND MIDDLE FINGERS OF HIS LEFT HAND.

EMPLOYEE WAS REPOSITIONING A FITTING (10"X90 DEGREES ELL WITH 10" LONG PIPE EXT UNFLANGED END) ON TOP OF WELDING POSITIONER.FITTING WAS BEING HELD IN VARIOUS POSITIONS BY A 1/2" DIA ROPE CHOKE D AROUND ELL BODY NEAR FLANGED END CAUSING LOAD TO BE SEVERLY OFF CENTER.UNFLANGED END WAS BEING SUPPORTED BY POSITIONER TOP KEEPING FITTING HORIZONTAL,WITH INJURED'S HAND GRASPING ROPE AND O

EMPLOYEE WAS TIGHTENING 2 1/2" SPRAY WATER HEADER PIPE ON FINISHING SCREEN DECK.WHILE USING 18" PIPE WRENCH,EMPLOYEES FEET SLIPPED ON POLY DECK,CAUSING EMPLOYEE TO FALL ONTO SIDE FRAME OF SCRE EN.EMPLOYEE BROKE FALL WITH RIGHT ELBOW AND STRUCK HEAD ON FRAME SIDE,CAUSING CUT BELOW RIGHT EYEBROW.

EMPLOYEE SET CHUTE UPON SAW HORSES TO DO SOME AIR ARCING HE LIFTED THE CHUTE ON THE FRONT TO BREAK LOSE PART OF THE OLD LINER BY DOING SO MOVED THE 1/2IN THICK FLANGE ON TOP OF A 1/2IN FLAT BA R WHICH WAS WELDED ON TOP OF HEAVY DUTY SAWHORSEWITHOUT RECHECKING HE BEGAN TO AIR ARC ON THE INSIDE OF THE CHUTE BY LEANING INSIDE & WORKING CHUTE WAS PUSHED BACK & STARTING TO FALL TRAPPING

EMPLOYEEE WAS WALKING WEST ABOUT 12FT FROM PIPE BEING MOVED BY TRACTOR OPERATOR OPERATOR WAS MOVING DRISCO OUT OF THE WAY FROM EAST TO WEST WHEN TRACTOR GOT NEAR WEST END THE DRISCO FLEXED & S TRUCK EMPLOYEE ON RIGHT BACK & HIP AREA

EMPLOYEE PUSHED START BUTTON ON STARTER CABINET.DOSCONNECTS FLASHED.CABINET DOOR BLEW OPEN.EMPLOYEE WAS BURNED AND STRUCK BY DOOR.

EMPLOYEE WAS WORKING IN #11 FINE FEED BIN.HE FELT PAIN IN SIDE AS HE WAS ENTERING MANHOLE.LATER HE WAS WORKING A 1/2H.P. SUMP PUMP AND FELT A SEVERE PAIN IN RIGHT LOWER ABDOMEN.SURGERY OCTOBER R 3,1990.

WORKING ON 3 MLP, SUCTION PLATE WAS TOO HEAVY TO SWING CLEAR OF THE WORK AREA. PLATE WAS STOOD UP AND LEANED AGAINST SUCTION FLEXIBLE. APPARENTLY AS THE DAY PROGRESSED THE FOOT OF THE PLATE SA NK INTO A DEPRESSION IN THE GROUND, THIS PUSHED THE TOP OF THE PLATE OUTWARDS FALLINGH ONTO LEGS OF EE.

MAN ON TRESTLE WAS LOWERING BUCKET WITH TOOLS TO GROUND. WELDING SHIELD WITH WELDING SLEEVES INSIDE FELL OUT OF BUCKET, I.NAME ATTEMPTED TO CATCH SHIELD; SHIELD STRUCK END OF LEFT MIDDLE FINGE R.

IN PROCESS OF LEAVING MACHINE EE S RIGHT FOOT SLIPPED OFF OF CABLE STEP, FULL BODY WEIGHT PUT ON LEFT FOOT.

EMPLOYEE WAS ATTEMTPING TO LINE UP PIPE TO BE PUT TOGETHER. IN DOING, SO HE HAD A LOT OF PRESSURE WITH BODY WEIGHT MASHING DOWN ON THE BAR, THE BAR BROKE ABOUT 3 INCHES FROM THE TIP AND THE EM PLOYEE'S WEIGHT CAUSED HIS HEAD TO HIT THE PIPELINE CAUSING A GASH OVER HIS LEFT EYE.

EMPLOYEE STATED, DURING THE PROCESS OF PUNCHING HOLES IN A BEND PLATE, MATERIAL HUNG UP AND HIS GLOVE GOT PULLED UP WITH A BURR EDGE; THE LEFT INDEX FINGER WAS PINCHED BETWEEN GUARD AND MATERI AL CAUSING THE INJURY.

EMPLOYEE WAS CLEANING UPPER PRIMARY SCREENS & HAD REMOVED TOP SCREEN & PREPARING TO PLACE SCREEN ON FLOOR GRATING HE PIVOTED AROUND WITH SCREEN IN HAND & STRUCK HANDRAIL WITH FINGER FINGER WAS CAUGHT BETWEEN HANDRAIL & SCREEN

FELL IN CAR CATCHING L UPPPER BODY BRUISING

EMPLOYEE WAS RESETTING WAT ER JACK #195 HE HAD STOPPED HIS TRACTOR WIT H HIS LEFT HAND ON GEARS ANOTHER EMPLOYEE TOSSED HOOKS UP ON THE T RACTOR HITTING I NAME LEFT HAND

WHILE ATTEMPTING TO MOVE MODEM ROCK, HAND SLIPPED OFF OF CORNER AND STRUCK UPPER SHELF METAL SHELF CUTTING BETWEEN KNUCKLE AND FINGER OF RIGHT MIDDLE FINGER.

EMPLOYEE HAD HOOKED SLED TO TRACTOR THO BE MOVED. HE STEPPED ON BLADE ARM TO GIVE OPERATOR DIRECTIONS, AS HE STEPPED UP RIGHT FOOT WAS STUCK IN MUD AND KNEE TWISTED.

EMPLOYEE BENT OVER TO PICK UP A 6FT PRY BAR EMPLOYEE FIRST SAW DR 010390

EMPL CHANGING OUT FLAT SCREENS IN #3 CHUTE ANOTHER EMPL HANDING SCREEN AND BEFORE I.NAME GOT CONTROL OF SCREEN IT SLIPPED CAUSING METAL TO CUT LEFT FOREARM.

WHILE EMPL WAS USING VISE TO SECURE BRACKET FOR WELDING VISE WAS IN FULL OPEN POSITION. VISE WOULD NOT MOVE WHEN SCREW HANDLE TURNED EMPL THOUGHT JAWS HAD BEEN MOVED BEYOND SCREW PICKUP POINT. HE THEN PLACED BOTH HANDS ON OUTER JAW & PUSHEDINWARD TO RESET SCREW ROD AT THIS POIT OUTER JAW MOVED INWARD TO COMPLETE CLOSURE CATCHING TIP OF FINGER.

EMPL HAD JUST FINISHED DUMPING 20' LOGS & HAD CLIMBED UP ACCESS LADDER BETWEEN CENTER & SOUTH DOUBLDECK SCREENS. HE WAS IN PROCESS OF COMING UP THROUGH OPENING & HE SLIPPED & FELL BACK DOWN TH ROUGH OPENING. EMPL FELL ABOUT 8' DOWN TO BUILT UP FEED.

EMPL & ANOTHER WORKER WERE ROTATING TROMMEL SHAFT & GOT LITTLE FINGER CAUGHT BETWEEN SHAFT & SAW HORSE. EMPL WAS NOT WEARING GLOVES.

EMPL WAS INSTALLING 1" X 3" FLAT BAR IN BUCKET ONE END WAS SITTING ON A DOG STEEL PLATE AND THE OTHER END WAS SITTING ON TOP OF BAR PLATE EMPL PUSHED BAR IN PLACE AND BAR FELL CATCHING FINGER BETWEEN TWO PLATES

EMPLOYEE WAS CUTTING BUSH WITH MOTOR POWERED HEDGE CLIPPERS. EMPLOYEE STATED THAT AS HE BROUGHT THE CLIPPERS BACK TOWARDS HIM, THEY SLIPPED AND STRUCK THE TOP OF HIS RIGHT KNEE.

EMPLOYEE WAS CUTTING RUBBER WITH POCKET KNIFE, THE BLADE CLOSED ON HIS FINGER. THE KNIFE WAS EQUIPPED WITH SELF LOCKING DEVICE. EMPLOYEE WAS NOT WEARING GLOVES.

EMPLOYEE WAS GRINDING UPPER TREAD RING ALLTHREAD BENT. OLD PIECE WAS REMOVED AND EMPLOYEE WAS REPLACING ALLTHREAD FROM TOP INSTEAD OF BOTTOM, PLATE WELDED TO DRYER CAUGHT FINGER BETWEEN ALLTH READ AND PLATE.

AS EMPLOYEE WAS WALKING AHEAD TO CUT UNDERBRUSH, EMPLOYEE LOOKED BACK TO THE INSTRUMETMAN TO GET AN IDEA OF WHERE THE LINE WAS GOING TO GO. WHEN HE TURNED BACK AROUND A LARGE SPIDER WAS 4 INC HES FROM HIS FACE. STARTLED, THE EMPLOYEE WITHOUT THINKING ATTEMPTED TO KNOCK THE SPIDER DOWN WITH HIS MACHETA, CUTTING HIS LITTLE FINGER.

EMPLOYEE WAS WORKING IN THE BACK OF THE SOUTH LOG,CHANGING OUT RECEIVING END GUDGEON.HE WAS MOVING THE THRUST BOX WHICH WAS ON GRATING IN POSITION TO PICK UP .HE WAS MOVING IT AND HIS FOOT THR OUGH A HOLE WHERE A PIPE WAS.HE LOST HIS BALANCECAUGHT HIMSELF ON HIS HANDS.

EMPL SHOVELING ALONG SW SIDE OF C-16 CONVEYOR.EMPL WENT TO THROW ROCK ONTO BELT,SHOVEL CAUGHT BELT CAUSING EMPL TO BE HIT WITH SHOVEL HANDLE ACROSS FACE.

EE WAS TOOL ROOM TRAILER TO GET CABLE SLING, WHEN HE TURNED TO COME OUT OF TRAILER HE CAUGHT HIS RIGHT FOOT ON DOLLEY CART, CAUSING HIM TO FALL AGAINST TOOL DOOR HINGE CUTTING HIS RIGHT FOREAR M.

EMPLOYEE WAS WASHINGAT THE TAIL END CONVEYER WHEN A PIECE OF BELT TORE OFF THE WEST SIDE HITTING THE HOSE ANS SCARING HER. AS SHE JUMPED TO MOVE OUT OF THE WAY SHE WRENCHED HER BACK.

TRACTOR HAD CLEARED OFF TOP OF TAILINGS LINE WHICH HAD BECOME COVERED WITH WET SAND & MUD. TRACTOR HAD PUT CORNER OF BLADE UNDER FLANGE WHICH HAD TOP BOLTS CUT OUT TO LIFT PIPE TO BREAK SUCTIO N. EMPL WAS STANDING BESIDE PIPELINE NEXT TO TRACTOR. TRACTOR RAISED PIPE & EDGE OF SAND BY EMPL BROKE & SLID UNDER PIPELINE ALONG WITH EMPLS FOOT. PIPE SLIPPED OFF BLADE & FELL ON EMPLS BOOT

REMOVING HITCH SHACKLE FROM PEAR SHAPE ON DRAG CHAINS TO MAKE READY TO ADD BARS TO THEM. WHEN END LINK ROLLED OR FELL FORWARD CATCHING EMPLS LITLE FINGER ON LEFT HAND.

EMPLOYEE WAS HELPING REPLACE BEARING ON #4 BALL MILL PINION. SLIDING BEARING AND HOUSING ON SHAFT WHEN BEARING BECAME MISLIGNED. EMPLOYEE AND OTHER EMPLOYEE LOWERED HOUSING TO FLOOR TO STRIGHT EN BEARING ON SHAFT. EMPLOYEE FELT BUMP ON OPPOSITE END OF BEARING AND HIS FINGER BECAME CAUGHT BETWEEN HOUSING AND PIPE ON FLOOR.

MEPL PULLED ON CHUTE OPENING ROPE WHEN HE PULLED THE ROPE IT BROKE CAUSING HIM TO LOOSE HIS BALANCE AND HE CAUGHT HIS FALL WITH HIS R HAND ON TOP OF THE RAIL CAR

WHILE PULLING PRIMARY DISCONNECTS ON WATER JACK THE MECHANISM BROKE AND FAILED TO LATCH OPEN.WHEN EMPLOYEE RELEASED THE HANDLE IT FLEW UPWARD STRIKING HIM ON THE CHIN.

EMPLOYEE PULLED TRUCK UP TO THE UTILITY SHED TO UNLOAD SOME EQUIPMENT HE PARKED THE TRUCK DIRECTLY IN FRONT OF THE SHED DOOR AND HAD TO CLOSE THE TRUCK DOOR TO GET THE SHED DOOR OPEN AS HE C LOSED THE TRUCK DOOR WITH HIS RIGHT HAND HE WAS ALSO OPENING THE SHED DOOR WITH HIS LEFT HAND AT THE SAME TIME THE TRUCK DOOR SHUT ON HIS RIGHT MIDDLE FINGER

EMPL GETTING OFF RR CAR #7 TRACK.AFTER TAKING 2 STEPS FELT LEFT FOOT TWIST.FOOT DIDNT BOTHER HIM BUT WHEN HE PULLED BOOT OFF 5:15AM FOUND KNOT ON SIDE OF LEFT FOOT.

EMPL WAS IN THE PROCESS OF SPREADING THE FORKS ON #450 FORKLIFT THE CAM LEVER ON FORK LOCKING PIN WAS BROKE OFF AND SOMEONE HAD REPLACED IT WITH A WIRE LOOP HE WAS LIFTING LOOP ON PIN TO UNLOC K FORK AND SPREAD FORK AT THE SMAME TIME HE WAS PUSHING WITH ARM LEG AND BODY FELT A SHARP PAIN IN LEFT ELBOW

EMPL WAS CROSSING RAILROAD TRACK AT WEST END OF ACL YARD WHILE EMPL WAS CROSSING TRACK THE DOOR ON THE PAYLOADER OPENED AND CLOSED ON LEFT HAND CUTTING AND BRUISING 4 FINGERS

OPERATOR WAS HELPING NEW OILER WITH POWER CABLE WENT TO PUT CABLE ON TUB WITH LEFT HAND PULLED MUSCLE.

EMPLOYEES WERE USING A CHERRY PICKER AND BASKET TO REMOVE USED SCREENS FROM TOP SCREEN LEVEL OF PRIMARY SIZERS. BEFORE LOADING THE BASKET, EMPLOYEE TIED THE BOTTOM OF BASKET TO HANDRAIL TO KEE P BASKET IN POSITION. AFTER LOADING, THE ROPE COULD NOT BE LOOSENED DUE TO TENSION ON ROPE, ANOTHER EMPLOYEE PUSHED BASKET OUT TO LOOSEN ROPE, BASKET HIT AGAINST RIGHT THUMB.

EMPLOYEE WAS ABOUT TO STEP DOWN FROM THE LEFT FRONT FENDER OF VEHICLE. WHEN HE STEPPED BACK HIS RIGHT METATARSAL GUARD CAUGHT ON THE FENDER, CAUSING HIM TO FALL BACKWARD AND HIT HIS RIGHT SIDE , LOWER BACK ON A STEP.

EMPLOYEE WAS TIGHTENING BOLTS ON BOTTOM OF FLANGE OF P-304 SUCTION FLEXIBLE. HE WAS POSITIONED IN A WAY THAT HIS UPPER TORSO WAS ABOVE THE FLANGE. WHILE TIGHTENING BOLT, HIS RATCHET SLIPPED CA USING HIS HEAD TO FALL FORWARD INTO FLANGE. GLASSES STRUCK FLANGE CAUSING LACERATION.

EMPL REMOVING MIXER BLADES PALCED AGAINST CONCRETE RETAINING WALL,RIGHT HAND MADE CONTACT WITH SHARP EDGE OF BLADE CAUSING LACERATION TO INDEX AND MIDDLE FINGERS ON RIGHT AHND..EMPL WAS WEARIN G GLOVES.

HE WAS DISASSEM6LING SCREEN ASSEMBLY. HE HAD BURNED ALL BUT I BOLTS OUT FROM EACH SID. HE HAD FASTENED CRANE TO SOUTH SIDE OF SCREEN. HE BURNED REMAINING BOLTS AND WAS KNOCKING THEM OUT WHE N THE NORTH SCR9EN SIDE BEGAN TO FALL, IT PUSED HIM AND AS HE JUMPED, TOP EDGE STRUCK LEFT LEG BY KNEE AND PINNED RIGHT FOOT.

EMPLOYEE WAS WA5KING UP TO CONTROL SLED TO CHECK MOYNO, HE SLIPPED ON MUDDY GROUND AND FELL STRICKING HIS RIGHT FOREARM ON CORNER OFCONTROL.

EMPLOYEE WAS DI8ASSEMBLING VARI-DRIVE AND HAD REMOVED RETAINER RING. HE HAD PUT LEFT HAND INSIDE FRAME TO APPLY HAND PRESSURE AS HE TAPPED ON DISC. THE TENSION SPRING ASSEMBLY WAS BROKEN AND R ELEASED VERY UN9XPECTEDLY, PUSHING OUTER DISC OFF SET AND SHEARING HIS FINGER TIP BETWEEN FRAME AND SLIDING DISC. DUE TO CONSTRUCTION, IT IS ALMOST IMPOSSIBLE TO SEE CONDITION OF SPRING TENSI

EMPLOYEE WAS HO5DING AN 1 1/4" BAR WITH BOTH GLOVED HANDS,ANOTHER MAN STRUCK BAR WITH A DOWNWARD GLANCING BLOW OF HAMMER,CAUSING ROYCE'S LITTLE FINGER TO HIT VERY EDGE OF H/M BRG.HSG.EMPLOYEE FIRST SAW DR. 12-14-87.

THE EMPLOYEE WA8 CUTTING AN OLD BEAM OUT OF A SECTION OF FLOORING.AFTER USING CUTTING TORCH HE REMOVED HIS BURNING GLOVES,OBSERVED A LARGE SECTION OF RUST ON THE BEAM,HE REACHED TO CHIP THE RU ST AND HIT HIS 6NPROTECTED HAND ON THE BEAM.

EMPLOYEE CAME I3 CONTACT WITH 12000 VOLTS EMPLOYEE WAS ATTEMPTING TO ADJUST TAP CAME IN CONTACT WITH BUSHINGS ON PRIMARY OF TRANSFORMER

WHILE PULLING A3DRAGLINE DUMP CABLE INTO THE SOCKET THE WINCH CABLE ON THE BOOM TRUCK SLIPPED OUT OF THE SHEAVE. THE CABLE TRAVELING AT A HIGH SPEED, WITH A PIECE OF PLATE ON THE END STRUCK TH E EMPLOYEE ON T2E HARD HAT AND THE HARD HAT CUT HIS HEAD.

EMPLOYEE WAS US3NG PIPE TO ADJUST RIGHT TOP BLADE ARM. PIPE WAS FITTED OVER SHAFT TO ROLL BLADE ARM. PIPE SLIPPED OFFAND STRUCK EMPLOYEE OVER RIGHT EYEBROW.

EMPLOYEE WAS RE1TAPPING HOLE IN ROLLER FRAME LOCATED CLOSE TO BRACE.HE WAS USING A CRESCENT WRENCH TO TURN THE TAP DUE TO RESTRICTIONS.AS THE TAP WENT DEEPER THE PULL OF CRESCENT CAME IN LINE WITH PROTRUDIN1 PIPE NIPPLE.THE TAP UNEXPECTEDLY CAUSING THUMB TO BE PINCHED BETWEEN CRESCENT AND NIPPLE.

EMPLOYEE WAS WO9KING IN WASHER MATRIX TUB ATTEMPTING TO REMOVE A SMALL SECTION OF CONCRETE WITH USE OF A SLEDGE HAMMER WHEN HE MADE CONTACT WITH THE CONCRETE THE HANDLE OF THE HAMMER BROKE & EMPLOYEES HAND 2IT AN OBJECT CAUSING LACERATION TO FINGER

EMPL DISMOUNTIN1 SERVICE TRUCK BUMPED LEFT ELBOW ON STEEL BAR.EMPL SWOLLEN SOMEWHAT BUT I.NAME SAID IT DIDNT BOTHER HIM.FIRST SAW DR 3-11-87.

EMP WAS ATTEMPT3NG TO BREAK A LONG STRINGY CHIP WITH A PAIR OF PLIERS, USING A T W ISTING AND PULLING ACTION ON THE CHIP. WHILE PULLING CHIP, CHIP CAME IN CONTACT WITH RING FINGER,LACERATING S AID FINGER. HE 4AS NOT WEARING CHIP PROTECTIVE GLOVES BECAUSE HIS CONCERN OF CHIP WRAPPING AROUND FINGER PULLING HAND INTO CHUCK AND RADIUS CUTTER

EMPLOYEE WAS ST9PPING DOWN FROM #U,, TRUCK FROM DRIVER'S SIDE, STEPPED TO LOW ELEVATION AND TWISTED RIGHT FOOT.

EMPLOYEE WAS LI3ING UP A SMALL HINGE ON A H/M CHUTE USING A CHIPPING HAMMER NOT MECHANICAL HAMMER WHICH SLIPPED HTTING HISH AND BETWEEN RIGHT RING MIDDLE FINGERS.

EMPLOYEE WAS MO5ING FLAT METAL FROM SHIPPING PALLET TO HOIST RACK HE STRUCK THUMB AGAINST EDGE OF METAL EMPLOYEE WAS WEARING LEATHER WORK GLOVES

AFTER WATER JAC5 WAS SET FLOAT CREW WERE PICKING UP FLEXABLE TO COUPLE UP WHEN I.NAME BENT OVER AND STARTED TO LIFT HE PULLED MUSCLE IN RT LOWER BACK

EMPLOYEE WAS AT7EMPTING TO SECURE STEEL DONUT IN LATHE CHUCK WHEN DONUT SLIPPED CATCHING RT RING FINGER BETWEEN DONUT AND LATHE CHUCK JAW

INSTALLING HOT 7OUPLING ONTO HAMMER MILL SHAFT USING 2X4 FOR CUSHION AND HITTING 2X4 WITH FOUR POUND HAMMER WEARING HEAVY ASBESTOS GLOVES GLOVES RESTRICTED FEEL OF WHERE FINGERS WERE HIT CATCH ING FINGER ON E8GE OF COUPLER AND BREAKING FINGER

EMPLOYEE WAS WO9KING ON TOP OF THREE SECTIONS OF SPRINGLOCK SCAFFOLD HE CUT SOME BANDING MATERIAL TO CLEAR THE METAL HE WAS TO REPLACE AFTER HE CUT THE BAND HE SLIPPED OFF HISGLOVES TO USE HIS TAPE MEASURE H9 FELT THE SCAFFOLD MOVE AND GRABBED FOR A HOLD HE GRABBED THE END OF THE BAND CUTTING HIS FINGER

EMPLOYEE ASSIGN9D TO MOVE TRAILER, THE DOOR OF THE TRAILER WAS LEFT OPEN AND THE DRIVER ATTEMPTED TO CLOSE IT. THE DOOR CLOSED SUDDENLY, CATCHING THE RIGHT RING FINGER.

WHILE REMOVING 5 FT SECTION OF STRUCTURAL COLUMN, EMPLOYEE WAS DRIFTING SECTION WITH COME A LONG FOR BETTER ACCESS FOR REMOVAL WHEN COLUMN SHIFTED, FALLING AGAINST HAD WHICH EMPLOYEE WAS USING TO BALANCE WHI5E OPERATING COME A LONG.

EMPLOYEE WAS HO8ING DOWN AT WASHER BETWEEN CONE FEED SUMP AND EAST DEBRIS PUMP, WATER AND MATRIX OVERFLOWED FROM MATRIX TUB OFF LINE. EMPLOYEE WAS KNOCKED OFF HIS FEET INCURRING A SMALL CUT O N LEFT THUMB AN8 BRUISING LEFT KNEE.

WHILE LIFTING L2AD (TRACK SECTION) TO TOP OF LEFT FLOAT ON MARSH TRACTOR, I PLACED MY R HAND ON CABLE TO STEADY THE LOAD, NOT REALIZING THE CLOSENESS OF THE SHEAVE, MY HAND WAS DRAWN INTO THE SHEAVE CATCHING3MY FINGERS

EMPLOYEE WAS IN3PROCESS OF MEASURING THE STROKE OF A PISTON & ROD COMPRESSED AIR WAS APPLIED TO THE PISTON THRU AN OPENING IN ONE END OF THE CYLINDER THE COMPRESSED AIR FORCED THE PISTON TO MO VE TO THE OPPOS3TE END OF THE CUYLINDER THIS RESULTED IN DEBRIS (OIL & RUST) BLOWING OUT OF A HOLE IN THE CYLINDER INTO THE EMPLOYEES FACE

WAS LIFTING HOO8 ANCHOR LINK & SOCKET WITH HOIST ON CHAIN RACK TO BE REPAIRED LOAD SLIPPED & CAUGHT FINGER BETWEEN LINK & SOCKET

WAS USING 1X3X43FLAT BAR TO DOG PLASTIC LINER IN BACK OF BUCKET FLAT BAR SLIPPED LOOSE AND ONE END CAUGHT FINGER BETWEEN PLASTIC AND BAR

CHANGING FITTINGS ON FLEXIBLE SPIRAL CONE HOSE WHILE CUTTING HOSE CLAMP WITH HACKSAW SAW SLIPED AND CUT BACK OF LEFT INDEX FINGER AND HAND.

EMPLOYEE WAS MO5ING NEW MATERIAL FOR PAINTING METAL TURNED OVER TURNING THUMB BACKWARDS FIRST SAW DR 11 22 85

EMPLOYEE WAS REMOVING STRINGER CHIPS FROM THE PAN OF HIS LATHE. WHILE CARRYING THE CHIPS TO THE TRASH BIN, ONE OF THE CHIPS BECAME SNAGGED ON A PART OF THE LATHE, CAUSING THE CHIP TO LACERATE HIS RIGHT INDEX FINGER. I,NAME WAS WEARING LEATHER WORK GLOVES AT THE TIME.

EMP HOOKED CHAIN HOOKS AROUND PIPE HE MOVED OR SLID THE CHAIN ALONG PIPE TO FIND BALANCE POINT IN ORDER FOR TRACTOR TO PICK UP TRACTOR DRIVER PICKED UP PIPE THINKING EMP WAS IN CLEAR EMPLOYEE HAND WAS CAUGHT BETWEEN CHIAN AND PIPE

EMPLOYEE WAS WORKING IN BUCKET YARD WHENA GUST OF WIND CAME UP WHIPPING SAND AND FOREIGN PARTICLE INTO EYE.