Mining Incidents

T-Rex: 33 MSHA citations Metal/Non-Metal

CSA Materials, Inc. · Surface
Controlled by Roger Albert
Garden City, Glasscock County, TX  ·  Active
MSHA Mine ID: 4105083

T-Rex has $12K in proposed MSHA penalties and $0 outstanding across 0 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at T-Rex.

Fatalities
0
Total incidents
3
Years on record
2021–2023
Latest incident
Oct 2023
Compliance record
MSHA citations since 2015
33
citations
7
significant & substantial
$11,649
proposed penalties
$11,649
paid to date
100% of proposed penalties paid to date, a $0 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2015
32
inspections on record
321
inspection hours
n/a
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 321 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.

T-Rex has $12K in proposed MSHA penalties and $0 outstanding across 0 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$12K
proposed penalties
$12K
current assessed
$12K
paid to date
$0
outstanding
33 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2026-03-12.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
21.2%
significant & substantial
12.1%
high negligence or reckless
21.2%
reasonably likely or greater
42.4%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 6.1% low, 81.8% moderate, 12.1% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2022-01-20, 4 years ago
4
samples
0
limit-tested
Most sampled contaminants
  • Respirable dust, <.1mg3
  • Unlisted Particulate, respirable, <1% Qtz1
Show the individual readings (4)
Date Contaminant Concentration Limit Conc / limit Occupation
2022-01-20 Respirable dust, <.1mg 0 Truck Driver
2022-01-20 Respirable dust, <.1mg 0 Truck Driver
2022-01-20 Respirable dust, <.1mg 0 Front-end Loader Operator
2022-01-20 Unlisted Particulate, respirable, <1% Qtz 0.31 Front-end Loader Operator
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.

T-Rex recorded 0.00 reportable injury cases per 100 full-time workers in 2025.

Injury rate, 2025
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
Below average. The US metal and nonmetal mining average was 1.65 and the all-US-mining average was 1.97 cases per 100 workers.
In Texas, metal and nonmetal mining averaged 1.17 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2025 * 0.00 0.00 0.000
2024 * 0.00 0.00 0.000
2023 * 5.08 0.00 0.000
2022 * 7.61 7.61 0.000
2021 * 6.56 0.00 0.000
2020 * 0.00 0.00 0.000
2019 * 0.00 0.00 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
  1. CSA Materials, Inc. 2014 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year Employees
2026 14
2025 12
2024 15
2023 14
2022 10
2021 11
2020 11
2019 8
2018 4
2017 4
2016 8
2015 7
2014 5
Source: MSHA quarterly employment and production, updated weekly.

T-Rex sits in Glasscock County, Texas, where the Census mining category is 1.3% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Glasscock County, Texas · Population 1,070
1.3%
Mining share of county employment
$106,806
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2026 Q2 14,383 0 0 0.0
2026 Q1 8,685 1 0 115.1
2025 Q4 9,936 0 0 0.0
2025 Q3 10,475 0 0 0.0
2025 Q2 10,136 0 0 0.0
2025 Q1 10,788 0 0 0.0
2024 Q4 9,553 1 0 104.7
2024 Q3 11,752 0 0 0.0
Show 40 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2024 Q2 10,944 2 0 182.7
2024 Q1 11,275 0 0 0.0
2023 Q4 11,902 1 1 84.0
2023 Q3 9,795 0 0 0.0
2023 Q2 8,658 0 0 0.0
2023 Q1 8,994 0 0 0.0
2022 Q4 9,772 1 0 102.3
2022 Q3 7,450 1 0 134.2
2022 Q2 1,490 0 0 0.0
2022 Q1 7,579 4 0 527.8
2021 Q4 7,991 0 0 0.0
2021 Q3 8,582 3 0 349.6
2021 Q2 6,833 0 0 0.0
2021 Q1 7,075 1 0 141.3
2020 Q4 9,612 0 0 0.0
2020 Q3 8,246 0 0 0.0
2020 Q2 7,767 1 0 128.7
2020 Q1 3,670 0 0 0.0
2019 Q4 5,766 1 0 173.4
2019 Q3 6,863 0 0 0.0
2019 Q2 4,881 0 0 0.0
2019 Q1 3,944 3 1 760.6
2018 Q4 2,184 0 0 0.0
2018 Q3 0 0 0
2018 Q2 2,485 0 0 0.0
2018 Q1 2,313 0 0 0.0
2017 Q4 1,312 3 0 2286.6
2017 Q3 0 0 0
2017 Q2 4,219 4 3 948.1
2017 Q1 4,082 0 0 0.0
2016 Q4 3,021 1 1 331.0
2016 Q3 4,106 0 0 0.0
2016 Q2 4,070 2 0 491.4
2016 Q1 3,669 0 0 0.0
2015 Q4 6,759 0 0 0.0
2015 Q3 5,743 0 0 0.0
2015 Q2 2,956 0 0 0.0
2015 Q1 3,891 3 1 771.0
2014 Q4 4,503 0 0 0.0
2014 Q3 2,488 0 0 0.0
No fatalities recorded at this mine.

Reportable incidents

3 on file

2023 · 1 incident

October 4, 2023 TX · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator HANDLING OF MATERIALS
CSA Materials, Inc. · Struck by flying object

Employee was using nylon rope when laying poly pipe. The nylon rope was weathered and frayed. The rope broke and the poly pipe hit employee on the shoulder upper arm. Employee was transported to hospital, evaluated, no injuries found only possible minor bruise. Employee was released with full duty release on 10/5/2023.

2022 · 1 incident

September 20, 2022 TX · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman POWERED HAULAGE
CSA Materials, Inc. · Caught in, under or between a moving and a stationary object

Employee was spotting a skidsteer bucket to collect some loose material. The operator of the skidsteer postioned bucket on employee's left foot causing a laceration which required approximately 4 stitches.

2021 · 1 incident

April 5, 2021 TX · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDTOOLS (NONPOWERED)
CSA Materials, Inc. · Struck by... (Not Elsewhere Classified)

Injured worker was cutting a belt for a conveyor system when the utility knife slipped and cut left wrist/lower arm.