Mining Incidents

Tanner Quarry: 60 MSHA citations Metal/Non-Metal

Rogers Group Inc · Surface
Tanner, AL, Limestone County, AL  ·  Active
MSHA Mine ID: 0103413

Tanner Quarry has $10K in proposed MSHA penalties and $100 outstanding across 2 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at Tanner Quarry.

Fatalities
0
Total incidents
3
Years on record
2012–2020
Latest incident
Jul 2020
Compliance record
MSHA citations since 2010
60
citations
13
significant & substantial
$9,893
proposed penalties
$8,996
paid to date
91% of proposed penalties paid to date, a $897 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2009
48
inspections on record
757
inspection hours
n/a
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 757 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.
Imminent-danger orders
A Section 107(a) order removes miners from an area when an inspector finds an imminent danger. Each order is lifted once the condition is corrected, so this counts orders issued, not orders now in effect.
1
Section 107(a) orders
Most recent order: 2013-09-18.
On record since 2013.
Source: MSHA imminent-danger order records, updated weekly.

Tanner Quarry has $10K in proposed MSHA penalties and $100 outstanding across 2 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$10K
proposed penalties
$9K
current assessed
$9K
paid to date
$100
outstanding
58 assessments are final orders; 2 contested dockets.
Of $2K in penalties contested before the Commission, $1K was upheld in final decisions.
As of the most recent assessment on 2023-04-12.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
22.4%
significant & substantial
12.1%
high negligence or reckless
22.4%
reasonably likely or greater
46.6%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 25.9% low, 62.1% moderate, 12.1% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
When citations were contested
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
2 citations taken to the federal commission · 3% of citations on record
  • Settled 2 · 100%
100%
S&S designation survived the contest
Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.
of 2 decided S&S contests · industry: 79%
44%
Penalty reduction in decided contests
$2K proposed, $1K after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2015-08-20.
Contested penalties
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this mine contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
Docket Decision Judge Year Proposed / upheld
SE 2014-0217 Settlement Lesnick 2014 $1K → $555
SE 2015-0419 Settlement Lesnick 2016 $585 → $468
Source: FMSHRC civil penalty dockets and decisions (public record), updated weekly.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2024-09-24
11%
of limit-tested samples over the exposure limit
32
samples
19
limit-tested
Most sampled contaminants
  • Quartz, respirable, >1% Qtz232 over
  • Respirable dust, <.1mg8
  • Nuisance dust, respirable, <1% Qtz1
Show the individual readings (32)
Date Contaminant Concentration Limit Conc / limit Occupation
2019-09-25 Quartz, respirable, >1% Qtz 0.49 0.46 1.07 Crusher Oper/Worker
2017-08-02 Quartz, respirable, >1% Qtz 0.68 0.38 1.79 Cleanup Man
2024-09-24 Quartz, respirable, >1% Qtz 0.19 0.47 0.40 Cleanup Man
2024-09-24 Respirable dust, <.1mg 0 Truck Driver
2024-09-24 Respirable dust, <.1mg 0 Front-end Loader Operator
2022-05-04 Quartz, respirable, >1% Qtz 0.16 Utility Man
2022-05-04 Quartz, respirable, >1% Qtz 0.15 Washer Operator
2022-05-04 Quartz, respirable, >1% Qtz 0.18 0.62 0.29 Utility Man
2021-09-23 Quartz, respirable, >1% Qtz 0.21 Cleanup Man
2021-09-23 Respirable dust, <.1mg 0 Jackhammer Operator
2021-09-23 Respirable dust, <.1mg 0 Front-end Loader Operator
2021-09-23 Quartz, respirable, >1% Qtz 0.16 0.47 0.34 Truck Driver
2021-09-23 Respirable dust, <.1mg 0 Truck Driver
2021-09-23 Quartz, respirable, >1% Qtz 0.25 0.86 0.29 Cleanup Man
2021-09-23 Quartz, respirable, >1% Qtz 0.16 Cleanup Man
2020-07-08 Quartz, respirable, >1% Qtz 0.37 0.79 0.47 Laborer, Bullgang
2020-07-08 Quartz, respirable, >1% Qtz 0.3 0.79 0.38 Cleanup Man
2020-07-08 Quartz, respirable, >1% Qtz 0.19 Cleanup Man
2019-09-25 Quartz, respirable, >1% Qtz 0.24 0.43 0.56 Utility Man
2019-09-25 Quartz, respirable, >1% Qtz 0.55 0.57 0.96 Utility Man
2019-09-25 Quartz, respirable, >1% Qtz 0.38 0.49 0.78 Dry Screen Plant Operator
2017-10-18 Quartz, respirable, >1% Qtz 0.16 0.3 0.53 Crusher Oper/Worker
2017-10-18 Quartz, respirable, >1% Qtz 0.14 0.54 0.26 Screen/Scalper Operator
2017-10-18 Quartz, respirable, >1% Qtz 0.26 0.64 0.41 Cleanup Man
2017-08-02 Quartz, respirable, >1% Qtz 0.37 0.7 0.53 Crusher Oper/Worker
2016-09-14 Respirable dust, <.1mg 0 Crusher Oper/Worker
2016-09-14 Respirable dust, <.1mg 0 Front-end Loader Operator
2016-09-14 Nuisance dust, respirable, <1% Qtz 0.22 10 0.02 Rotary Bucket Ex. Operator
2016-09-14 Respirable dust, <.1mg 0 Utility Man
2015-06-25 Quartz, respirable, >1% Qtz 0.24 0.69 0.35 Cleanup Man
2015-06-25 Quartz, respirable, >1% Qtz 0.16 0.46 0.35 Dry Screen Plant Operator
2015-06-25 Quartz, respirable, >1% Qtz 0.25 0.56 0.45 Cleanup Man
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.

Tanner Quarry recorded 0.00 reportable injury cases per 100 full-time workers in 2025.

Injury rate, 2025
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
Below average. The US metal and nonmetal mining average was 1.65 and the all-US-mining average was 1.97 cases per 100 workers.
In Alabama, metal and nonmetal mining averaged 1.52 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2025 * 0.00 0.00 0.000
2024 * 0.00 0.00 0.000
2023 * 0.00 0.00 0.000
2022 * 0.00 0.00 0.000
2021 * 0.00 0.00 0.000
2020 * 4.52 0.00 0.000
2019 * 0.00 0.00 0.000
2018 * 0.00 0.00 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
  1. Rogers Group Inc 2009 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year Employees
2026 16
2025 13
2024 21
2023 22
2022 23
2021 19
2020 17
2019 13
2018 12
2017 12
2016 12
2015 12
2014 12
2013 12
2012 12
2011 11
2010 3
2009 3
Source: MSHA quarterly employment and production, updated weekly.

Tanner Quarry sits in Limestone County, Alabama, where the Census mining category is 0.3% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Limestone County, Alabama · Population 107,577
0.3%
Mining share of county employment
$83,534
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2026 Q2 9,494 0 0 0.0
2026 Q1 8,888 0 0 0.0
2025 Q4 7,339 0 0 0.0
2025 Q3 8,054 0 0 0.0
2025 Q2 7,408 0 0 0.0
2025 Q1 7,540 0 0 0.0
2024 Q4 8,536 0 0 0.0
2024 Q3 15,284 0 0 0.0
Show 62 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2024 Q2 12,465 0 0 0.0
2024 Q1 10,735 0 0 0.0
2023 Q4 12,006 0 0 0.0
2023 Q3 12,069 0 0 0.0
2023 Q2 13,129 1 0 76.2
2023 Q1 13,575 0 0 0.0
2022 Q4 8,150 0 0 0.0
2022 Q3 14,213 0 0 0.0
2022 Q2 14,372 2 0 139.2
2022 Q1 14,571 0 0 0.0
2021 Q4 11,026 2 0 181.4
2021 Q3 12,338 0 0 0.0
2021 Q2 11,676 0 0 0.0
2021 Q1 11,093 2 0 180.3
2020 Q4 9,530 0 0 0.0
2020 Q3 11,975 1 0 83.5
2020 Q2 9,922 0 0 0.0
2020 Q1 12,798 0 0 0.0
2019 Q4 9,882 0 0 0.0
2019 Q3 9,857 0 0 0.0
2019 Q2 8,321 0 0 0.0
2019 Q1 6,731 0 0 0.0
2018 Q4 7,142 0 0 0.0
2018 Q3 8,233 0 0 0.0
2018 Q2 7,540 0 0 0.0
2018 Q1 8,057 0 0 0.0
2017 Q4 7,549 0 0 0.0
2017 Q3 8,782 1 1 113.9
2017 Q2 9,196 0 0 0.0
2017 Q1 9,644 1 0 103.7
2016 Q4 10,020 0 0 0.0
2016 Q3 11,355 2 1 176.1
2016 Q2 9,782 0 0 0.0
2016 Q1 9,146 0 0 0.0
2015 Q4 8,672 1 0 115.3
2015 Q3 10,366 0 0 0.0
2015 Q2 9,934 3 1 302.0
2015 Q1 6,465 4 1 618.7
2014 Q4 7,728 0 0 0.0
2014 Q3 8,324 2 0 240.3
2014 Q2 8,283 0 0 0.0
2014 Q1 8,467 3 2 354.3
2013 Q4 7,777 0 0 0.0
2013 Q3 8,506 2 1 235.1
2013 Q2 8,980 1 0 111.4
2013 Q1 7,598 4 0 526.5
2012 Q4 7,512 0 0 0.0
2012 Q3 8,035 1 0 124.5
2012 Q2 8,081 1 0 123.7
2012 Q1 5,575 0 0 0.0
2011 Q4 5,862 4 0 682.4
2011 Q3 5,603 0 0 0.0
2011 Q2 7,011 0 0 0.0
2011 Q1 3,581 0 0 0.0
2010 Q4 618 2 0 3236.2
2010 Q3 378 0 0 0.0
2010 Q2 141 0 0 0.0
2010 Q1 69 0 0 0.0
2009 Q4 995 0 0 0.0
2009 Q3 330 0 0 0.0
2009 Q2 1,675 0 0 0.0
2009 Q1 710 0 0 0.0
No fatalities recorded at this mine.

Reportable incidents

3 on file

2020 · 1 incident

July 20, 2020 AL · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator HANDLING OF MATERIALS
Rogers Group Inc · Caught in, under or between a moving and a stationary object

Employee was attempting to adjust seat in a PC490-11 excavator with right hand when weight shifted forward pinching right little finger in the frame of the seat. Resultant was a cut to the tip of right little finger. The employee was treated with surgical adhesive and a tetanus shot. Employee returned to work that morning with no restrictions.

2015 · 1 incident

September 12, 2015 AL · Metal/Non-Metal utility man, shift tech, service/dump truck operator HANDLING OF MATERIALS
Rogers Group Inc · Caught in, under or between (Not Elsewhere Classified)

Employee clocked out after shift. Was standing outside break room leaning against door frame wind caught door and smashed finger. Employee had laceration and fracture to right little finger. Employee received sutures and was released for regular duty with an antibiotic and pain medication and no restrictions.

2012 · 1 incident

April 30, 2012 AL · Metal/Non-Metal POWERED HAULAGE
Rogers Group Inc · Accident type, without injuries

Our Employee was advised by his doctor to take medication as prescribed, he neglected to follow his advice and passed out while at work. No bodily injury or damage/accident took place.