Mining Incidents

Tn mine 20: 101 MSHA citations Coal

Controlled by James C Justice III
Briceville, Campbell County, TN  ·  Abandoned
MSHA Mine ID: 4003320

Tn mine 20 has $48K in proposed MSHA penalties and $7K outstanding across 15 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at Tn mine 20.

Fatalities
0
Total incidents
6
Years on record
2009–2011
Latest incident
Apr 2011
Compliance record
MSHA citations since 2008
101
citations
47
significant & substantial
$48,284
proposed penalties
$26,827
paid to date
56% of proposed penalties paid to date, a $21,457 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2008
38
inspections on record
923
inspection hours
n/a
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 923 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.
Imminent-danger orders
A Section 107(a) order removes miners from an area when an inspector finds an imminent danger. Each order is lifted once the condition is corrected, so this counts orders issued, not orders now in effect.
1
Section 107(a) orders
Most recent order: 2011-01-12.
On record since 2011.
Source: MSHA imminent-danger order records, updated weekly.

Tn mine 20 has $48K in proposed MSHA penalties and $7K outstanding across 15 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$48K
proposed penalties
$34K
current assessed
$27K
paid to date
$7K
outstanding
93 assessments are final orders; 15 contested dockets.
Of $45K in penalties contested before the Commission, $25K was upheld in final decisions.
As of the most recent assessment on 2015-01-26.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
50.5%
significant & substantial
5.4%
high negligence or reckless
50.5%
reasonably likely or greater
21.5%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 2.2% low, 92.5% moderate, 5.4% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
When citations were contested
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
48 citations taken to the federal commission · 48% of citations on record
  • Settled 42 · 88%
  • Stood as issued 4 · 8%
  • Vacated or withdrawn 2 · 4%
66%
S&S designation survived the contest
Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.
of 38 decided S&S contests · industry: 79%
44%
Penalty reduction in decided contests
$45K proposed, $25K after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2015-01-30.
Contested penalties
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this mine contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
Docket Decision Judge Year Proposed / upheld
SE 2014-0515 Settlement Miller 2015 $10K → $7K
SE 2012-698 Settlement Rae 2014 $6K → $896
SE 2011-401 Settlement Feldman 2012 $5K → $4K
SE 2010-1191 Settlement Weisberger 2012 $5K → $2K
SE 2015-0157 Withdrawal Paez 2016 $5K → $0
SE 2011-10 Settlement Bulluck 2013 $4K → $3K
Source: FMSHRC civil penalty dockets and decisions (public record), updated weekly.

MSHA sampling at Tn mine 20 shows 100% of 37 respirable coal dust samples met the 1.5 mg/m3 standard.

Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Respirable coal dust
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.

Last sampled: 2015-09-19, 10 years ago
100%
within 1.5 mg/m3
37
samples
0.82
dust max (mg/m3)
0
over MSHA ECV
The excessive concentration value (ECV) is MSHA's own per-sample enforcement threshold, which builds in measurement uncertainty; a sample over its ECV can trigger a citation. The count covers only samples MSHA assigned an ECV.
34 samples taken by MSHA inspectors, 3 by the operator.
Most-sampled occupations
  • BULLDOZER OPERATOR13
  • REFUSE TRUCK DRIVER/BACKFILL TRUCK DRIVE11
  • HIGHLIFT OPERATOR/FRONT END LOADER6

Noise
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.

Last sampled: 2011-09-12, 14 years ago
0%
over PEL
23
samples
Most-sampled occupations
  • BULLDOZER OPERATOR7
  • REFUSE TRUCK DRIVER/BACKFILL TRUCK DRIVE7
  • BACKHOE OPERATOR4
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.
Health sampling trend
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.
Respirable coal dust by year
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.
Year within 1.5 mg/m3 samples
2015 100% 4
2011 100% 5
2010 100% 5
2009 100% 20
2008 100% 3
Noise by year
Year over PEL samples
2011 0% 1
2010 0% 10
2009 0% 10
2008 0% 2
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.

Tn mine 20 recorded 9.64 reportable injury cases per 100 full-time workers in 2011.

Injury rate, 2011
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
9.64
total case rate
4.82
days-away rate
0.000
fatality rate
Above average. The US coal mining average was 3.83 and the all-US-mining average was 3.08 cases per 100 workers.
In Tennessee, coal mining averaged 4.18 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2011 * 9.64 4.82 0.000
2010 * 2.26 0.00 0.000
2009 * 17.02 11.35 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
  1. Premium Coal Company Inc 2008 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Coal production is reported quarterly and lags the current period; the most recent quarters may be incomplete.
Year Employees Coal produced (tons)
2016 0
2015 1
2014 5 259
2013 1
2012 0
2011 16 32,080
2010 33 98,739
2009 17 74,399
2008 4 16,131
Source: MSHA quarterly employment and production, updated weekly.

Tn mine 20 sits in Campbell County, Tennessee, where the Census mining category is 0.6% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Campbell County, Tennessee · Population 39,568
0.6%
Mining share of county employment
$50,260
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2016 Q3 0 0 0
2016 Q2 0 0 0
2016 Q1 0 0 0
2015 Q4 0 0 0
2015 Q3 0 0 0
2015 Q2 0 0 0
2015 Q1 120 5 0 41666.7
2014 Q4 0 0 0
Show 23 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2014 Q3 0 0 0
2014 Q2 5,144 7 2 1360.8
2014 Q1 0 1 0
2013 Q4 0 0 0
2013 Q1 159 0 0 0.0
2012 Q4 0 0 0
2012 Q3 0 8 0
2012 Q1 0 0 0
2011 Q4 1,147 1 0 871.8
2011 Q3 2,106 0 0 0.0
2011 Q2 17,209 1 1 58.1
2011 Q1 21,050 16 7 760.1
2010 Q4 21,824 4 4 183.3
2010 Q3 20,401 3 1 147.1
2010 Q2 25,747 17 3 660.3
2010 Q1 20,377 7 4 343.5
2009 Q4 16,109 4 4 248.3
2009 Q3 641 6 2 9360.4
2009 Q2 4,040 0 0 0.0
2009 Q1 14,464 2 2 138.3
2008 Q4 6,491 0 0 0.0
2008 Q3 719 5 3 6954.1
2008 Q2 632 0 0 0.0
No fatalities recorded at this mine.

Reportable incidents

6 on file

2011 · 2 incidents

April 19, 2011 TN · Coal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver SLIP OR FALL OF PERSON
Premium Coal Company Inc · Fall to the walkway or working surface

While dismounting the haulback truck the EE put his foot on the ground twisting his ankle causing him to fall backwards to the ground.

February 23, 2011 TN · Coal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDTOOLS (NONPOWERED)
Premium Coal Company Inc · Over-exertion in wielding or throwing objects

Injured was using hammer to strike a metal pin - part of hammer head broke away and struck employee in face.

2010 · 1 incident

February 15, 2010 TN · Coal greaser, grease man, oiler, lube man, dragline oiler SLIP OR FALL OF PERSON
Premium Coal Company Inc · Over-exertion (Not Elsewhere Classified)

Weather conditions were snowy & icy. Employee stepped out of lube trk, slipped on ice/snow resulting in twisting his left ankle.

2009 · 3 incidents

November 27, 2009 TN · Coal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver SLIP OR FALL OF PERSON
Premium Coal Company Inc · Over-exertion (Not Elsewhere Classified)

Terex 33-09 back-up shorted at radio and caused fire in cab, operator stopped truck and tried to extinguish in an excited state he turned wrong and twisted knee (left).

October 26, 2009 TN · Coal water truck operator OTHER
Premium Coal Company Inc · Struck by flying object

Wind blew dust in EE's eye while on the ground.