Mining Incidents

Valle Quarry: 57 MSHA citations Metal/Non-Metal

Valle Stone, LLC · Surface
Controlled by Kendy Valle
San Saba, San Saba County, TX  ·  Active
MSHA Mine ID: 4105419

Valle Quarry has $28K in proposed MSHA penalties and $19K outstanding across 0 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at Valle Quarry.

Fatalities
0
Total incidents
0
Years on record
Latest incident
Compliance record
MSHA citations since 2019
57
citations
17
significant & substantial
$27,991
proposed penalties
$8,855
paid to date
32% of proposed penalties paid to date, a $19,137 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2019
21
inspections on record
228
inspection hours
n/a
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 228 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.

Valle Quarry has $28K in proposed MSHA penalties and $19K outstanding across 0 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$28K
proposed penalties
$28K
current assessed
$9K
paid to date
$19K
outstanding
57 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2026-04-28.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
29.8%
significant & substantial
8.8%
high negligence or reckless
29.8%
reasonably likely or greater
42.1%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 1.8% low, 89.5% moderate, 8.8% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2021-12-01, 4 years ago
0%
of limit-tested samples over the exposure limit
3
samples
1
limit-tested
Most sampled contaminants
  • Respirable dust, <.1mg2
  • Quartz, respirable, >1% Qtz1
Show the individual readings (3)
Date Contaminant Concentration Limit Conc / limit Occupation
2021-12-01 Respirable dust, <.1mg 0 Bobcat Operator
2021-12-01 Respirable dust, <.1mg 0 Stone Polisher/Cutter
2021-12-01 Quartz, respirable, >1% Qtz 0.25 0.37 0.68 Cutting Mach Operator
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.

Valle Quarry recorded 0.00 reportable injury cases per 100 full-time workers in 2025.

Injury rate, 2025
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
No reportable injury cases in any year shown. Employee-hours were reported in each of those years, so these are true zeros rather than missing data. Citations, listed in the compliance record above, are inspector-found violations and are counted separately from worker injuries.
Below average. The US metal and nonmetal mining average was 1.65 and the all-US-mining average was 1.97 cases per 100 workers.
In Texas, metal and nonmetal mining averaged 1.17 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2025 * 0.00 0.00 0.000
2024 * 0.00 0.00 0.000
2023 * 0.00 0.00 0.000
2022 * 0.00 0.00 0.000
2021 * 0.00 0.00 0.000
2020 * 0.00 0.00 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
  1. Valle Stone, LLC 2019 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year Employees
2026 9
2025 8
2024 9
2023 11
2022 11
2021 12
2020 12
2019 9
Source: MSHA quarterly employment and production, updated weekly.

Valle Quarry sits in San Saba County, Texas, where the Census mining category is 6.1% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
San Saba County, Texas · Population 5,802
6.1%
Mining share of county employment
$54,855
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2026 Q2 5,448 9 4 1652.0
2026 Q1 5,014 5 2 997.2
2025 Q4 5,526 0 0 0.0
2025 Q3 5,498 0 0 0.0
2025 Q2 5,447 3 0 550.8
2025 Q1 4,483 0 0 0.0
2024 Q4 5,401 5 1 925.8
2024 Q3 5,545 6 1 1082.1
Show 22 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2024 Q2 5,955 0 0 0.0
2024 Q1 5,441 4 2 735.2
2023 Q4 6,343 0 0 0.0
2023 Q3 8,108 1 0 123.3
2023 Q2 7,142 0 0 0.0
2023 Q1 6,329 2 1 316.0
2022 Q4 6,081 0 0 0.0
2022 Q3 7,310 0 0 0.0
2022 Q2 6,873 8 3 1164.0
2022 Q1 6,530 0 0 0.0
2021 Q4 7,862 3 0 381.6
2021 Q3 8,141 4 0 491.3
2021 Q2 9,160 0 0 0.0
2021 Q1 6,406 2 0 312.2
2020 Q4 7,840 0 0 0.0
2020 Q3 8,608 1 1 116.2
2020 Q2 8,513 0 0 0.0
2020 Q1 7,783 3 2 385.5
2019 Q4 5,157 0 0 0.0
2019 Q3 6,812 0 0 0.0
2019 Q2 7,751 1 0 129.0
2019 Q1 0 0 0

No reportable incidents on file.

MSHA has no recorded reportable accidents for this mine in the current dataset. New reports appear here within a week of being filed.