Mining Incidents

Weller Mine: 14 MSHA citations Coal

Controlled by Randall E Crawford
Yolande, Jefferson County, AL  ·  NonProducing
MSHA Mine ID: 0103455

Weller Mine has $2K in proposed MSHA penalties and $68 outstanding across 0 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at Weller Mine.

Fatalities
0
Total incidents
0
Years on record
Latest incident
Compliance record
MSHA citations since 2017
14
citations
5
significant & substantial
$2,129
proposed penalties
$2,061
paid to date
97% of proposed penalties paid to date, a $68 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2017
32
inspections on record
478
inspection hours
n/a
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 478 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.

Weller Mine has $2K in proposed MSHA penalties and $68 outstanding across 0 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$2K
proposed penalties
$2K
current assessed
$2K
paid to date
$68
outstanding
14 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2021-09-21.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
35.7%
significant & substantial
0.0%
high negligence or reckless
35.7%
reasonably likely or greater
0.0%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 7.1% low, 92.9% moderate, 0.0% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.

MSHA sampling at Weller Mine shows 99% of 119 respirable coal dust samples met the 1.5 mg/m3 standard.

Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Respirable coal dust
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.

Last sampled: 2022-09-24, 3 years ago
99%
within 1.5 mg/m3
119
samples
4.80
dust max (mg/m3)
1
over MSHA ECV
The excessive concentration value (ECV) is MSHA's own per-sample enforcement threshold, which builds in measurement uncertainty; a sample over its ECV can trigger a citation. The count covers only samples MSHA assigned an ECV.
64 samples taken by MSHA inspectors, 55 by the operator.
Most-sampled occupations
  • HIGHWALL DRILL OPERATOR45
  • BULLDOZER OPERATOR37
  • REFUSE TRUCK DRIVER/BACKFILL TRUCK DRIVE13

Silica (quartz)

Last sampled: 2022-04-01, 4 years ago
17.1
silica avg (%)
10
samples
27.4
silica max (%)
Most-sampled occupations
  • HIGHWALL DRILL OPERATOR6
  • BULLDOZER OPERATOR4

Noise
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.

Last sampled: 2022-03-24, 4 years ago
0%
over PEL
44
samples
Most-sampled occupations
  • BULLDOZER OPERATOR12
  • REFUSE TRUCK DRIVER/BACKFILL TRUCK DRIVE11
  • BACKHOE OPERATOR7
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.
Health sampling trend
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.
Respirable coal dust by year
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.
Year within 1.5 mg/m3 samples
2022 100% 10
2021 100% 15
2020 100% 13
2019 100% 36
2018 97% 32
2017 100% 13
Silica (quartz) by year
Year silica avg (%) samples
2022 6.5 1
2021 5.6 1
2020 16.3 2
2019 24.1 4
2017 14.8 2
Noise by year
Year over PEL samples
2022 0% 10
2021 0% 7
2019 0% 13
2018 0% 7
2017 0% 7
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.

Weller Mine recorded 0.00 reportable injury cases per 100 full-time workers in 2020.

Injury rate, 2020
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
No reportable injury cases in any year shown. Employee-hours were reported in each of those years, so these are true zeros rather than missing data. Citations, listed in the compliance record above, are inspector-found violations and are counted separately from worker injuries.
Below average. The US coal mining average was 3.19 and the all-US-mining average was 2.08 cases per 100 workers.
In Alabama, coal mining averaged 4.38 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2020 * 0.00 0.00 0.000
2019 * 0.00 0.00 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
  1. National Coal of Alabama, Inc. 2012 to 2013
  2. Reed Minerals, Inc. 2013 to 2014
  3. Centennial Natural Resources LLC 2014 to 2016
  4. Cahaba Resources LLC 2016 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Coal production is reported quarterly and lags the current period; the most recent quarters may be incomplete.
Year Employees Coal produced (tons)
2023 0
2022 6 18,442
2021 6 11,795
2020 13 37,565
2019 27 132,105
2018 28 146,178
2017 19 58,515
Source: MSHA quarterly employment and production, updated weekly.

Weller Mine sits in Jefferson County, Alabama, where the Census mining category is 0.3% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Jefferson County, Alabama · Population 669,744
0.3%
Mining share of county employment
$64,589
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2023 Q1 0 0 0
2022 Q3 2,090 0 0 0.0
2022 Q2 3,600 0 0 0.0
2022 Q1 6,100 0 0 0.0
2021 Q4 7,000 0 0 0.0
2021 Q3 808 0 0 0.0
2021 Q2 2,420 0 0 0.0
2021 Q1 3,000 0 0 0.0
Show 14 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2020 Q4 4,200 0 0 0.0
2020 Q3 6,000 0 0 0.0
2020 Q2 10,800 0 0 0.0
2020 Q1 9,450 0 0 0.0
2019 Q4 11,560 1 0 86.5
2019 Q3 18,800 1 0 53.2
2019 Q2 17,650 0 0 0.0
2019 Q1 21,989 1 1 45.5
2018 Q4 13,340 2 1 149.9
2018 Q3 21,600 0 0 0.0
2018 Q2 15,000 4 1 266.7
2017 Q4 12,550 0 0 0.0
2017 Q3 17,513 1 0 57.1
2017 Q2 800 1 1 1250.0

No reportable incidents on file.

MSHA has no recorded reportable accidents for this mine in the current dataset. New reports appear here within a week of being filed.