Mining Incidents

West Pittsburgh Quarry: 1 recorded fatality Metal/Non-Metal

Controlled by Thomas K Lampert
West Pittsburg, Lawrence County, PA  ·  Abandoned
MSHA Mine ID: 3603441

West Pittsburgh Quarry has $52K in proposed MSHA penalties and $0 outstanding across 1 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at West Pittsburgh Quarry.

Fatalities
1
Total incidents
34
Years on record
1985–2008
Latest incident
Feb 2008
Compliance record
MSHA citations since 2000
45
citations
15
significant & substantial
$52,050
proposed penalties
$34,450
paid to date
66% of proposed penalties paid to date, a $17,600 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2000
16
inspections on record
463
inspection hours
n/a
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 463 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.

West Pittsburgh Quarry has $52K in proposed MSHA penalties and $0 outstanding across 1 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$52K
proposed penalties
$34K
current assessed
$34K
paid to date
$0
outstanding
41 assessments are final orders; 1 contested dockets.
Of $48K in penalties contested before the Commission, $31K was upheld in final decisions.
As of the most recent assessment on 2007-06-07.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
34.9%
significant & substantial
11.6%
high negligence or reckless
34.9%
reasonably likely or greater
44.2%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 2.3% low, 86.0% moderate, 11.6% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
When citations were contested
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
3 citations taken to the federal commission · 7% of citations on record
  • Settled 3 · 100%
100%
S&S designation survived the contest
Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.
of 3 decided S&S contests · industry: 79%
37%
Penalty reduction in decided contests
$48K proposed, $31K after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2006-01-17.
Contested penalties
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this mine contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
Docket Decision Judge Year Proposed / upheld
PENN 2006-65M Settlement Feldman 2006 $48K → $31K
Source: FMSHRC civil penalty dockets and decisions (public record), updated weekly.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2005-08-23, 21 years ago
0%
of limit-tested samples over the exposure limit
2
samples
1
limit-tested
Most sampled contaminants
  • Quartz, respirable, >1% Qtz1
  • Respirable dust, <.1mg1
Show the individual readings (2)
Date Contaminant Concentration Limit Conc / limit Occupation
2005-08-23 Respirable dust, <.1mg 0 Front-end Loader Operator
2005-08-23 Quartz, respirable, >1% Qtz 0.27 0.84 0.32 Crusher Oper/Worker
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.

West Pittsburgh Quarry recorded 0.00 reportable injury cases per 100 full-time workers in 2007.

Injury rate, 2007
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
Below average. The US metal and nonmetal mining average was 3.30 and the all-US-mining average was 3.77 cases per 100 workers.
In Pennsylvania, metal and nonmetal mining averaged 3.78 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2007 * 0.00 0.00 0.000
2006 * 0.00 0.00 0.000
2005 * 7.00 7.00 6.996
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
  1. Vanport Stone Inc 1950 to 1984
  2. Kenlar Construction Supply Company Inc 1984 to 1987
  3. C & C Vanport Limestone Plant #2 Inc 1987 to 1990
  4. Medusa Aggregates Company 1990 to 1998
  5. Southdown Inc 1998 to 2001
  6. Cemex Inc 2001 to 2004
  7. Newgate Devel. Corp. 2004 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year Employees
2008 1
2007 10
2006 10
2005 10
2001 0
2000 21
Source: MSHA quarterly employment and production, updated weekly.

West Pittsburgh Quarry sits in Lawrence County, Pennsylvania, where the Census mining category is 0.2% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Lawrence County, Pennsylvania · Population 85,423
0.2%
Mining share of county employment
$60,779
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2008 Q1 10 0 0 0.0
2007 Q4 7,008 0 0 0.0
2007 Q3 5,040 0 0 0.0
2007 Q2 4,659 1 0 214.6
2007 Q1 3,828 2 0 522.5
2006 Q4 5,019 0 0 0.0
2006 Q3 6,003 5 3 832.9
2006 Q2 7,656 0 0 0.0
Show 9 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2006 Q1 7,061 0 0 0.0
2005 Q4 7,338 10 2 1362.8
2005 Q3 8,441 11 5 1303.2
2005 Q2 8,396 0 0 0.0
2005 Q1 4,411 0 0 0.0
2001 Q1 0 0 0
2000 Q4 16,023 0 0 0.0
2000 Q2 8,410 0 0 0.0
2000 Q1 6,085 4 1 657.4

Fatalities at this mine

1 recorded
September 13, 2005 PA · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver Fatality · POWERED HAULAGE
Newgate Devel. Corp. · Struck against a moving object

Employee was operating a 50 ton Cat end dump truck & was at dump site with his 3rd load of stone from pit. While attempting to dump the load from truck at dump site, which is elevated some 20' above the plant, his truck went over the dump face backwards & flipped end for end 180' landing on its top, wheels to sky, at bottom of dump site at plant level. He was still in cab.

Reportable incidents

33 on file (excluding fatalities above)

2008 · 1 incident

February 18, 2008 PA · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech SLIP OR FALL OF PERSON
Newgate Devel. Corp. · Fall from ladders

Mechanic was disassembling tin shed and climbed ladder to cut a bolt holding shed wall. Fell backwards off of ladder and hurt his ribs.

2001 · 1 incident

January 23, 2001 PA · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer MACHINERY
Southdown Inc · Struck against a moving object

WHILE OPERATING BLADE, EE DIRECTED HIS ATTENTIONAWAY FROM THE DIRECTION OF TRAVEL. DURING THIS BRIEF PERIOD OF TIME, THE EQUIPMENT STRUCK AN EMBANKMENT, JARRING HIM UNEXPECTEDLY, RESULTING IN A PULLED BACK MUSCLE.

2000 · 1 incident

September 6, 2000 PA · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech SLIP OR FALL OF PERSON
Southdown Inc · Fall onto or against objects

MECHANIC SLIPPED OFF DOZER TRACK AND HIT RIGHT KNEE ON DOZER PUSH ARM.

1998 · 2 incidents

November 14, 1998 PA · Metal/Non-Metal prep plant foreman, supervisor, mill plant supervisor, kiln supervisor HANDLING OF MATERIALS
Southdown Inc · Over-exertion in pulling or pushing objects

PULLING ON A CONVEYOR BELT AND HIS HAND SLIPPED

February 2, 1998 PA · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator HANDTOOLS (NONPOWERED)
Medusa Aggregates Company · Over-exertion (Not Elsewhere Classified)

WORKING IN A AWKWARD POSITION. TWISTED LOWER BACK.

1997 · 2 incidents

July 17, 1997 PA · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator HANDLING OF MATERIALS
Medusa Aggregates Company · Struck by... (Not Elsewhere Classified)

CURCUIT BREAKER TRIPPED CAUSING THE JAW TO STOP. THE JAW HAD TO BE UNLOADED IN ORDER FOR IT TO RESTART. A ROCK SLIPPED OUT OF HIS HAND AND SMASHED HIS MIDDLE FINGER RT HAND.

May 5, 1997 PA · Metal/Non-Metal prep plant foreman, supervisor, mill plant supervisor, kiln supervisor HANDTOOLS (NONPOWERED)
Medusa Aggregates Company · Caught in, under or between a moving and a stationary object

THERE WAS A LARGE ROCK STUCK IN THE PRIMARY JAW CRUSHER. EE TRIED TO MOVE THE ROCK WITH A BAR. THE BAR SLIPPED AND HIS LEFTTHUMB WAS SMASHED BETWEENTHE BAR AND THE HAND RAILING.

1996 · 2 incidents

November 25, 1996 PA · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator ELECTRICAL
Medusa Aggregates Company · Flash burns (electric)

EE WAS CHANGING A FUSE WHICH HE INSTALLED INCORRECTLY. THE FUSE BOX BLEW UP CAUSING A FLASH BURN TO HIS LEFT HAND.

April 29, 1996 PA · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDTOOLS (NONPOWERED)
Medusa Aggregates Company · Caught in, under or between a moving and a stationary object

HE WAS TAKING BOLTS OFF CHUTE TO REMOVE IT. CHUTE WAS HELD UP WITH COME-ALONG. CHUTE SLIPPED WHEN BOLT WAS REMOVED AND PINCHED HIS HAND AGAINST THE BIN.

1995 · 2 incidents

August 18, 1995 PA · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator HANDLING OF MATERIALS
Medusa Aggregates Company · Fall to the walkway or working surface

WHILE INSTALLING A SET OF SUPPORT LEGS ON A CONVEYOR, THE LEGS STARTED TO FALL. WHEN THE EE TRIED TO MOVE OUT OF THE WAY, HE GOT TANGLED UP IN SOME CHAINS, HIS LEG GOT STUCK AND FELL TO THE GR OUND. THE EE HYPEREXTENDED HIS LEG, PULLING HIS HAMSTRING.

July 20, 1995 PA · Metal/Non-Metal welder (shop) HANDTOOLS (NONPOWERED)
Medusa Aggregates Company · Struck against stationary object

EMPLOYEE WAS TIGHTENING BOLTS ON CONVEYOR FRAME.BEING REPAIRED. WRENCH SLIPPED OFF NUT ALLOWING HIS HAND TO STRIKE HIS HAND TO STRIKE AGAINST METAL FRAME WORK CUTTING HIS HAND.

1994 · 2 incidents

November 4, 1994 PA · Metal/Non-Metal electrician, lineman SLIP OR FALL OF PERSON
Medusa Aggregates Company · Fall from machine

EMPLOYEE WAS REPAIRING ROCK TRUCK. STARTED TO CLIMB DOWN FOR MORE TOOLS. HAND WERE FREE, BIFOCALS CAUSED MISJUDGEMENT ON FOOTING. MISSTED STEP AND FELL ABOUT 3' STRIKING LEFT SIDE OF HEAD NE AR LEFT EAR.

September 21, 1994 PA · Metal/Non-Metal drill operator HANDTOOLS (NONPOWERED)
Medusa Aggregates Company · Struck by flying object

EMPLOYEE WAS REMOVING DRILL BIT FROM ROCK DRILL TO REPLACE HE STRUCK BIT WITH HAMMER TO LOOSEN METAL SLIVER FLEW & PUNCTURED HIS ABDOMEN

1992 · 3 incidents

August 14, 1992 PA · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer MACHINERY
Medusa Aggregates Company · Struck against a moving object

EMPLOYEE WAS REMOVING OVERBURDEN WITH A SCRAPER, IN A PUSH-PULL COMBINATION WITH A DOZER. THE SCRAPER SEPARATED FROM THE DOZER THEN SLOWED AT WHICH TIME THE DOZER CAUGHT UP TO CONTINUE PUSHING AND BUMPED. THE BUMP JARRED THE SCRAPER OPERATOR'S BACK.

March 10, 1992 PA · Metal/Non-Metal SLIP OR FALL OF PERSON
Medusa Aggregates Company · Fall from machine

EMPL HELPING ASSEMBLE PORTABLE CRUSHER.WAS WORKING ON SIDE OF MACHINE LINING UP BOLTS HOLES AND TRIED TO ADJUST POSITION WAS STANDING.WHEN HE MOVED HE SLIPPED AND FELL 8' TO GROUND INJURING WR IST AND FACE RESULTING IN BROKEN WRIST & CONCUSSION.

February 8, 1992 PA · Metal/Non-Metal welder (shop) HANDTOOLS (NONPOWERED)
Medusa Aggregates Company · Over-exertion (Not Elsewhere Classified)

EMPL USING 3/4 DRIVE RATCHET WITH A 4 TO 1 MULTIPLIER TIGHTENING SIDE FRAME BOLTS ON A 245 CAT SHOVEL.SPRAINED LOWER BACK.

1991 · 4 incidents

April 11, 1991 PA · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator MACHINERY
Medusa Aggregates Company · Struck by... (Not Elsewhere Classified)

OPERATOR OF HAMMER WAS POSITIONING ONTO ROCK STUCK IN JAW CRUSHER,BEING DIRECTED BY THE INJURED.HAMMER SLIPPED OFF ROCK STRIKING SAFETY RAILING BREAKING IT FREE AND HITTING THE INJURED IN THE MOUTH,CUTTING BOTH UPPER AND LOWER LIPS AND LOSING 2 TEETH.

February 20, 1991 PA · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDLING OF MATERIALS
Medusa Aggregates Company · Over-exertion in lifting objects

EMPLOYEE WAS PICKING OVERSIZED ROCK (20-50 LBS) FROM CONVEYOR BELT AND PULLED HIS SHOULDER WHILE ATTEMPTING TO LIFT OR PICK A ROCK APPROX. 40 LBS.

February 6, 1991 PA · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator HANDTOOLS (NONPOWERED)
Medusa Aggregates Company · Struck by... (Not Elsewhere Classified)

EE WAS CUTTING A SECTION OF RUBBER HOSE WITH A UTILITY KNIFE CLOSE TO HIS LEG. PULLED KNIFE TOWARD HIMSELF IT SLIPPED AND CUT HIS RIGHT LEG.

1990 · 2 incidents

September 12, 1990 PA · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver POWERED HAULAGE
Medusa Aggregates Company · Struck against a moving object

EMPLOYEE WAS BACKING A 773 ROCK TRUCK ONTO AN ELEVATED SURGE DUMP WHEN THE EDGE COLLAPSED.SUBJECT WAS AT LEAST 10 FEET FROM SAFETY BERM.THE TRUCK THEN FELL BACKWARDS LANDING UPSIDEDOWN.EMPLOYE E WAS WEARING SEAT BELTS.

July 7, 1990 PA · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator SLIP OR FALL OF PERSON
Medusa Aggregates Company · Fall to lower level, (Not Elsewhere Classified)

EMPL WAS CHANGING TOP DECK SCREEN ON EL JAY SHAKER & WAS WALKING ON SCREEN STEPPED IN H OLE IN SCREEN REACHED TO STABILIZE HIMSELF HOOKING FOURTH METACARPAL IN SCREEN CLOTH.

1989 · 6 incidents

November 15, 1989 PA · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator STEPPING OR KNEELING ON OBJECT
C & C Vanport Limestone Plant #2 Inc · Struck against stationary object

I,NAME WAS ATTEMPTING TO CHAIN DOWN CONVEYOR BELTS AT THE END OF HIS SHIFT. I,NAME WAS DESCENDING A SET OF STEPS ON AN ELEVATOR CAT WALK WHEN HE STEPPED ON A ROCK AND TWISTED HIS KNEE.

October 19, 1989 PA · Metal/Non-Metal greaser, grease man, oiler, lube man, dragline oiler FALL OF FACE/RIB/PILLAR/SIDE/HIGHWALL
C & C Vanport Limestone Plant #2 Inc · Struck by falling object

I NAME AND W NAME WERE ATTEMPTING TO MEASURE A BLOCK OF LIMESTONE ADJACENT TO THE HIGHWALL FACE WHEN A SMALL SECTION OF THE SAFETY BENCH APPROX 500LBS FELL WITHOUT WARNING STRIKING I NAME ON H IS HEAD AND BACK

October 7, 1989 PA · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
C & C Vanport Limestone Plant #2 Inc · Over-exertion in lifting objects

THE INJURED WAS REPAIRING AN ALTERNATOR ON THE TAILGATE OF HIS SERVICE TRUCK.WHEN HE LIFTED THE ALTERNATOR OUT OF THE VICE HE TURNED TO SET THE ALTERNATOR ON THE GROUND,TWISTING HIS ABCK AND A GGRAVATING A PREVIOUS INJURY.

September 19, 1989 PA · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman POWERED HAULAGE
C & C Vanport Limestone Plant #2 Inc · Struck by falling object

HE WAS CLEANING AROUND GUARDED CONVEYOR WHEN A ROCK ALLEGEDLY FELL FROM THE CONVEYOR BELT AND STRUCK SUBJECT'S LEFT FOREARM. HE WAS TOLD TO CLEAN FLOOR ON THE OTHER SIDE OF THE CONVEYOR AND NO T TO DO ANYTHING UNSAFE. THERE WERE NO WITNESSES

June 29, 1989 PA · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDTOOLS (NONPOWERED)
C & C Vanport Limestone Plant #2 Inc · Struck by flying object

I NAME WAS HELPING A WELDER TO CONSTRUCT A CATWALK. HE WAS HOLDING SOME ANGLE IRON WHILE THE WELDER WAS WORKING. THE WELDER WAS SHIPPING THE WELDED IRON AND A PIECE OF METAL FLEW THEN BOUNCE D OFF THE ANGLE AND STRUCK INJURED IN HIS LEFT EYE. Y

June 19, 1989 PA · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator POWERED HAULAGE
C & C Vanport Limestone Plant #2 Inc · Caught in, under or between (Not Elsewhere Classified)

EMPLOYEE TOLD OTHER MAN TO KEEP PLANT OPERATING AND HE WENT UP THE BELTWAY TO CHECK SOMETHING. EVIDENTLY HE NOTICED SOMETHING WRONG AND LEFT THE CAT WALK ON RIGHT SIDE OF BELT. NO WITNESS TO ACTUAL ACCIDENT. UNABLE TO TALKE TO INJURED MAN AT PRESENT TIME. RIGHT LOWER ARM CAUGHT IN CONVEYOR AND WAS SEVERED. HELD SAFETY MEETING TO STRESS PROPER SAFETY PRACTICES.

1988 · 2 incidents

October 10, 1988 PA · Metal/Non-Metal greaser, grease man, oiler, lube man, dragline oiler MACHINERY
C & C Vanport Limestone Plant #2 Inc · Caught in, under or between (Not Elsewhere Classified)

INDIVIDUAL WAS CHANGING A ROCK GUARD ON A 245 CAT BACKHOE HE WAS USING A RATCHET TO LOOSEN NUTS HOLDING THE ROCK GUARD BACKHOE NEEDED T O BE TURNED TO ALLOW CLEARENCE FOR A BLAST WHICH WAS R E ADY TO BE SET OFF IN THE PIT AREA WHEN BACKHOE WAS LET DOWN TO TURN HIS RT.HAND WAS CAUGHT BETWEEN THE RATCHET & THE LEFT SET OF TRACKS ON THE BACKHOE HE R ECEIVED LACERATIONS ON THE RIGHT H

February 24, 1988 PA · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver STEPPING OR KNEELING ON OBJECT
C & C Vanport Limestone Plant #2 Inc · Struck against stationary object

EMPL WAS DRIVING TRIAXLE DUMP TRUCK HAULING CRUSHED ROCK TO STOCKPILES. HE WAS IN PROCESS OF DSMOUNTAING FROM TRIAXLE WHICH HE WAS DRIVING WHEN HE STEPPED ON ROCK APPROX. 10" IN DIAMETER. OCK SHIFTED BECAUSE OF FROZEN GROUND CAUSING EMPL TO FALL & INJURE HIS LEFT ANKLE.

1986 · 2 incidents

1985 · 1 incident

December 18, 1985 PA · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDLING OF MATERIALS
Kenlar Construction Supply Company Inc · Over-exertion in lifting objects

BACKING UP STEP8 ON DRAGELINE CARRYING BATTERY FOR DRAGLINE BENT OVER TO LIFT BATTERY & HURT LOWER BACK