Bankhead-Gardner Inc: 1 MSHA citation operator
Controlled by
Jerry L Gardner
MSHA operator ID: P24250
Watch this operator
Email me when a new MSHA incident is filed at any Bankhead-Gardner Inc mine.
- Fatalities
- 0
- Total incidents
- 1
- Mines on record
- 1
- Years on record
- 2000
Compliance record
MSHA citations since 2000
1
citations
0
significant & substantial
$55
proposed penalties
$55
paid to date
100% of proposed penalties paid to date, a $0 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2000
13
inspections on record
52
inspection hours
n/a
citations per 100 inspection hours
ⓘ
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.Rate withheld: 52 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.
Penalty disposition
ⓘ
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.$55
proposed penalties
$55
current assessed
$55
paid to date
$0
outstanding
1 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2000-07-10.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
ⓘ
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.0.0%
significant & substantial
0.0%
high negligence or reckless
0.0%
reasonably likely or greater
0.0%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 0.0% low, 100.0% moderate, 0.0% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
Injury rate, 2000
ⓘ
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.7.82
total case rate
7.82
days-away rate
0.000
fatality rate
About average. The US coal mining average was 7.74 and the all-US-mining average was 5.64 cases per 100 workers.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Health sampling
ⓘ
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.Respirable coal dust
ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.
Last sampled: 2000-07-10, 26 years ago
ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.100%
within 1.5 mg/m3
9
samples
1.06
dust max (mg/m3)
9 samples taken by MSHA inspectors, 0 by the operator.
Most-sampled occupations
- FINE COAL PLANT OPERATOR2
- HIGHLIFT OPERATOR/FRONT END LOADER2
- LABORER/BLACKSMITH2
Noise
ⓘ
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.
Last sampled: 2000-07-10, 26 years ago
ⓘ
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.29%
over PEL
7
samples
Most-sampled occupations
- FINE COAL PLANT OPERATOR2
- HIGHLIFT OPERATOR/FRONT END LOADER2
- LABORER/BLACKSMITH1
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.
Top causes
- SLIP OR FALL OF PERSON 1 non-fatal
Incident timeline
2000
1
Mines on record
For insurers, brokers, and safety consultants
Where Bankhead-Gardner Inc stands on silica, penalties, and injury rate
MSHA's standard limits respirable silica to 50 micrograms per cubic metre, but MSHA publishes dust and quartz as separate files and never the silica figure itself. We derive it per sample, score it against the limit, and set the operator's injury rate against a benchmark built from the full MSHA operator record. With the 26-year penalty trail, contest posture, and fatality history. Delivered as a PDF with the underlying data as CSV.
The federal record itself stays free on this site. What costs money, and why.