Mining Incidents

Lafarge Midwest: 896 MSHA citations operator

Controlled by Holcim Ltd
MSHA operator ID: L17776

Watch this operator

Email me when a new MSHA incident is filed at any Lafarge Midwest mine.

Fatalities
0
Total incidents
421
Mines on record
2
Years on record
1983–2017
Compliance record
MSHA citations since 2000
896
citations
188
significant & substantial
$908,832
proposed penalties
$733,450
paid to date
81% of proposed penalties paid to date, a $175,382 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2000
99
inspections on record
5,685
inspection hours
15.8
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
896 citations across 5,685 inspection hours.
Source: MSHA inspections data, updated weekly.
Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$909K
proposed penalties
$733K
current assessed
$733K
paid to date
$0
outstanding
895 assessments are final orders; 30 contested dockets.
Of $505K in penalties contested before the Commission, $310K was upheld in final decisions.
As of the most recent assessment on 2018-02-21.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
21.0%
significant & substantial
8.8%
high negligence or reckless
21.0%
reasonably likely or greater
41.5%
permanently disabling or fatal if injury occurs
Negligence coding: 0.3% none, 14.4% low, 76.4% moderate, 8.8% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
Injury rate, 2017
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
3.48
total case rate
0.00
days-away rate
0.000
fatality rate
Above average. The US metal and nonmetal mining average was 1.99 and the all-US-mining average was 2.48 cases per 100 workers.
Year total case rate days-away fatal
2017 3.48 0.00 0.000
2016 0.00 0.00 0.000
2015 1.18 0.00 0.000
2014 5.68 1.42 0.000
2013 4.48 0.00 0.000
2012 3.84 0.00 0.000
2011 5.61 0.56 0.000
2010 8.09 2.31 0.000
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2017-03-21, 9 years ago
12%
of limit-tested samples over the exposure limit
153
samples
145
limit-tested
Most sampled contaminants
  • Nuisance dust, total, <1% Qtz5316 over
  • Quartz, respirable, >1% Qtz181 over
  • Calcium oxide24
  • Nuisance dust, respirable, <1% Qtz16

Area samples (mill and shop air)

Last sampled: 2011-08-03, 15 years ago
9
samples
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.
When citations were contested
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
201 citations taken to the federal commission · 22% of citations on record
  • Settled 151 · 75%
  • Stood as issued 50 · 25%
61%
S&S designation survived the contest
Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.
of 67 decided S&S contests · industry: 79%
36%
Penalty reduction in decided contests
$484K proposed, $308K after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2018-03-27. Vacated and withdrawn citations are removed from the file this view attributes through, so that outcome is slightly undercounted here.
Contested penalties
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this operator contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
Docket Decision Judge Year Proposed / upheld
CENT 2010-57M Settlement Lesnick 2010 $71K → $42K
CENT 2009-862M Settlement Manning 2010 $62K → $32K
CENT 2010-600M Settlement Pope II 2011 $56K → $24K
LAKE 2011-11M Settlement Melick 2011 $52K → $12K
CENT 2007-187M Dismissal Manning 2008 $29K → $29K
CENT 2007-109M Default Lesnick 2007 $29K → $29K
Source: FMSHRC civil penalty dockets and decisions (public record), updated weekly.

Top causes

Incident timeline

2017
3
2015
3
2014
4
2013
3
2012
6
2011
11
2010
19
2009
8
2008
15
2007
2
2006
3
2005
8
2004
2
2003
13
2002
10
2001
14
2000
16
1999
20
1998
12
1997
13
1996
14
1995
25
1994
25
1993
17
1992
26
1991
24
1990
20
1989
22
1988
30
1987
12
1986
9
1985
8
1984
3
1983
1

Mines on record

For insurers, brokers, and safety consultants

Where Lafarge Midwest stands on silica, penalties, and injury rate

MSHA's standard limits respirable silica to 50 micrograms per cubic metre, but MSHA publishes dust and quartz as separate files and never the silica figure itself. We derive it per sample, score it against the limit, and set the operator's injury rate against a benchmark built from the full MSHA operator record. With the 26-year penalty trail, contest posture, and fatality history. Delivered as a PDF with the underlying data as CSV.

The federal record itself stays free on this site. What costs money, and why.

See a sample report
Need a different cut of the data? Ask us