Mining Incidents

North American Silica Sand, LLC: 1 recorded fatality operator

Controlled by Ignacio Martinez
MSHA operator ID: 0182934

North American Silica Sand, LLC has had 1 fatality among 1 reportable incident since 2026. MSHA has proposed $21K in penalties since 2022, with $19K outstanding.

Watch this operator

Email me when a new MSHA incident is filed at any North American Silica Sand, LLC mine.

Fatalities
1
Total incidents
1
Mines on record
1
Years on record
2026
Compliance record
MSHA citations since 2022
36
citations
11
significant & substantial
$21,426
proposed penalties
$2,295
paid to date
11% of proposed penalties paid to date. The remaining $19,131 was reduced, settled, contested or is still owed.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2022
18
inspections on record
474
inspection hours
n/a
citations per 100 inspection hours
ⓘ This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 474 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.
Penalty disposition
ⓘ Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$21K
proposed penalties
$21K
current assessed
$2K
paid to date
$19K
outstanding
14 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2026-07-13.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
ⓘ Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
32.4%
significant & substantial
20.6%
high negligence or reckless
32.4%
reasonably likely or greater
32.4%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 0.0% low, 79.4% moderate, 20.6% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
Injury rate, 2023
ⓘ This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000 and are withheld below 20,000 hours in a year. Employment reports reach back to 1983, but those earlier years come from MSHA's archived file format and are not used in rates.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
No reportable injury cases in any year shown. Employee-hours were reported in each of those years, so these are true zeros rather than missing data. Citations, listed in the compliance record above, are inspector-found violations and are counted separately from worker injuries.
Below average. The US metal and nonmetal mining average was 1.78 and the all-US-mining average was 2.10 cases per 100 workers.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2023 * 0.00 0.00 0.000
2022 * 0.00 0.00 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.

Top causes

Incident timeline

2026
1 (1f)

Mines on record

Fatalities under this operator

1 recorded
March 3, 2026 TX · Metal/Non-Metal cement worker, concrete worker, form man, mandoseal man Fatality · FALLING/SLIDING/ROLLING MATERIALS
North American Silica Sand, LLC · Struck by falling object

Unsure of what conditions contributed to the death

For insurers, brokers, and safety consultants

Where North American Silica Sand, LLC stands on silica, penalties, and injury rate

MSHA's standard limits respirable silica to 50 micrograms per cubic metre, but MSHA publishes dust and quartz as separate files and never the silica figure itself. We derive it per sample, score it against the limit, and set the operator's injury rate against a benchmark built from the full MSHA operator record. With the 26-year penalty trail, contest posture, and fatality history. Delivered as a PDF with the underlying data as CSV.

The federal record itself stays free on this site. What costs money, and why.

See a sample report
Need a different cut of the data? Ask us