Mining Incidents

Ollar-Decker LLC: 42 MSHA citations operator

Controlled by Elton Ollar; Ed Decker
MSHA operator ID: 0051385

Watch this operator

Email me when a new MSHA incident is filed at any Ollar-Decker LLC mine.

Fatalities
0
Total incidents
3
Mines on record
1
Years on record
2003–2006
Compliance record
MSHA citations since 2003
42
citations
19
significant & substantial
$9,538
proposed penalties
$4,138
paid to date
43% of proposed penalties paid to date, a $5,400 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2003
21
inspections on record
396
inspection hours
n/a
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 396 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.
Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$10K
proposed penalties
$10K
current assessed
$4K
paid to date
$5K
outstanding
41 assessments are final orders; 1 contested dockets.
Of $5K in penalties contested before the Commission, $5K was upheld in final decisions.
As of the most recent assessment on 2006-10-02.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
46.3%
significant & substantial
0.0%
high negligence or reckless
46.3%
reasonably likely or greater
17.1%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 2.4% low, 97.6% moderate, 0.0% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
Injury rate, 2004
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
9.24
total case rate
0.00
days-away rate
0.000
fatality rate
Above average. The US coal mining average was 5.57 and the all-US-mining average was 4.33 cases per 100 workers.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Respirable coal dust
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.

Last sampled: 2006-07-14, 20 years ago
100%
within 1.5 mg/m3
25
samples
1.34
dust max (mg/m3)
24 samples taken by MSHA inspectors, 1 by the operator.
Most-sampled occupations
  • COAL TRUCK DRIVER10
  • BACKHOE OPERATOR5
  • HIGHLIFT OPERATOR/FRONT END LOADER4

Silica (quartz)

Last sampled: 2005-06-01, 21 years ago
10.7
silica avg (%)
3
samples
18.9
silica max (%)
Most-sampled occupations
  • COAL TRUCK DRIVER2
  • BULLDOZER OPERATOR1

Noise
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.

Last sampled: 2006-05-25, 20 years ago
0%
over PEL
13
samples
Most-sampled occupations
  • COAL TRUCK DRIVER5
  • BACKHOE OPERATOR3
  • BULLDOZER OPERATOR3
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.
When citations were contested
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
2 citations taken to the federal commission · 5% of citations on record
  • Stood as issued 2 · 100%
100%
S&S designation survived the contest
Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.
of 2 decided S&S contests · industry: 79%
0%
Penalty reduction in decided contests
$5K proposed, $5K after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2006-08-31. Vacated and withdrawn citations are removed from the file this view attributes through, so that outcome is slightly undercounted here.
Contested penalties
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this operator contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
Docket Decision Judge Year Proposed / upheld
CENT 2006-259 Default Lesnick 2007 $5K → $5K
Source: FMSHRC civil penalty dockets and decisions (public record), updated weekly.

Top causes

Incident timeline

2006
1
2004
1
2003
1

Mines on record

For insurers, brokers, and safety consultants

Where Ollar-Decker LLC stands on silica, penalties, and injury rate

MSHA's standard limits respirable silica to 50 micrograms per cubic metre, but MSHA publishes dust and quartz as separate files and never the silica figure itself. We derive it per sample, score it against the limit, and set the operator's injury rate against a benchmark built from the full MSHA operator record. With the 26-year penalty trail, contest posture, and fatality history. Delivered as a PDF with the underlying data as CSV.

The federal record itself stays free on this site. What costs money, and why.

See a sample report
Need a different cut of the data? Ask us