Mining Incidents

Pleasant View Mining Company Inc: 1 recorded fatality operator

Controlled by Gary E Peyton
MSHA operator ID: P21913

Watch this operator

Email me when a new MSHA incident is filed at any Pleasant View Mining Company Inc mine.

Fatalities
1
Total incidents
215
Mines on record
1
Years on record
1992–2011
Compliance record
MSHA citations since 2001
872
citations
254
significant & substantial
$436,541
proposed penalties
$268,018
paid to date
61% of proposed penalties paid to date, a $168,523 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2000
145
inspections on record
8,264
inspection hours
10.6
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
872 citations across 8,264 inspection hours.
Source: MSHA inspections data, updated weekly.
Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$437K
proposed penalties
$268K
current assessed
$268K
paid to date
$0
outstanding
854 assessments are final orders; 34 contested dockets.
Of $333K in penalties contested before the Commission, $165K was upheld in final decisions.
As of the most recent assessment on 2011-08-29.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
29.6%
significant & substantial
9.8%
high negligence or reckless
29.4%
reasonably likely or greater
8.6%
permanently disabling or fatal if injury occurs
Negligence coding: 0.1% none, 8.3% low, 81.8% moderate, 9.6% high, 0.2% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
Injury rate, 2011
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
12.00
total case rate
12.00
days-away rate
0.000
fatality rate
Above average. The US coal mining average was 3.83 and the all-US-mining average was 3.08 cases per 100 workers.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2011 * 12.00 12.00 0.000
2010 * 4.29 4.29 0.000
2009 16.70 13.67 0.000
2008 14.40 12.60 0.000
2007 26.50 21.20 0.000
2006 14.39 10.79 0.000
2005 29.71 26.00 0.000
2004 * 17.12 4.28 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Respirable coal dust
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.

Last sampled: 2011-06-21, 15 years ago
93%
within 1.5 mg/m3
423
samples
3.44
dust max (mg/m3)
195 samples taken by MSHA inspectors, 228 by the operator.
Most-sampled occupations
  • CONTINUOUS MINER OPERATOR216
  • SHUTTLE CAR OPERATOR (STANDARD SIDE)48
  • ROOF BOLTER (TWIN HEAD) (RETURN SIDE)30

Silica (quartz)

Last sampled: 2010-02-17, 16 years ago
1.7
silica avg (%)
17
samples
2.8
silica max (%)
Most-sampled occupations
  • CONTINUOUS MINER OPERATOR13

Noise
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.

Last sampled: 2009-09-15, 16 years ago
7%
over PEL
45
samples
Most-sampled occupations
  • SHUTTLE CAR OPERATOR (STANDARD SIDE)11
  • CONTINUOUS MINER OPERATOR7
  • ROOF BOLTER (TWIN HEAD) (INTAKE SIDE)7
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.
When citations were contested
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
381 citations taken to the federal commission · 44% of citations on record
  • Settled 355 · 93%
  • Stood as issued 24 · 6%
  • Vacated or withdrawn 2 · 1%
96%
S&S designation survived the contest
Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.
of 127 decided S&S contests · industry: 79%
51%
Penalty reduction in decided contests
$333K proposed, $165K after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2011-08-26. Vacated and withdrawn citations are removed from the file this view attributes through, so that outcome is slightly undercounted here.
Contested penalties
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this operator contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
Docket Decision Judge Year Proposed / upheld
KENT 2008-421 Settlement Lesnick 2009 $135K → $14K
KENT 2009-1252 Settlement Moran 2011 $24K → $16K
KENT 2010-1074 Default Lesnick 2011 $16K → $16K
KENT 2008-708 Settlement Weisberger 2009 $16K → $12K
KENT 2010-105 Settlement Andrews 2011 $13K → $9K
KENT 2007-553 Settlement Melick 2008 $12K → $6K
Source: FMSHRC civil penalty dockets and decisions (public record), updated weekly.

Top causes

Incident timeline

2011
6
2010
2
2009
11
2008
10
2007
18
2006
15
2005
16
2004
6
2002
3
2001
1
1999
12
1998
13
1997
19
1996
19 (1f)
1995
16
1994
23
1993
23
1992
2

Mines on record

Fatalities under this operator

1 recorded
April 7, 1996 KY · Coal superintendent Fatality · ELECTRICAL
Pleasant View Mining Company Inc · Contact with hot objects or substances

AN OIL CIRCUIT BRAKER (O.C.B.) LOCATED ON THE SURFACE, CAUSED AN EXPLOSION, CAUUSING TRANSFORMER OIL TO SPRAY COVERING EMPLOYEE, CATCHING HIM ON FIRE, CAUSING 80 TO 90 PER-CENT BURNS TO EMPLOY EE'S BODY.

For insurers, brokers, and safety consultants

Where Pleasant View Mining Company Inc stands on silica, penalties, and injury rate

MSHA's standard limits respirable silica to 50 micrograms per cubic metre, but MSHA publishes dust and quartz as separate files and never the silica figure itself. We derive it per sample, score it against the limit, and set the operator's injury rate against a benchmark built from the full MSHA operator record. With the 26-year penalty trail, contest posture, and fatality history. Delivered as a PDF with the underlying data as CSV.

The federal record itself stays free on this site. What costs money, and why.

See a sample report
Need a different cut of the data? Ask us