Rock & Roll Coal, Inc.: 23 MSHA citations operator
MSHA operator ID: P24658
Watch this operator
Email me when a new MSHA incident is filed at any Rock & Roll Coal, Inc. mine.
- Fatalities
- 0
- Total incidents
- 0
- Mines on record
- 0
- Years on record
- —
Compliance record
MSHA citations since 2001
23
citations
9
significant & substantial
$2,251
proposed penalties
$372
paid to date
17% of proposed penalties paid to date, a $1,879 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2001
10
inspections on record
103
inspection hours
n/a
citations per 100 inspection hours
ⓘ
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.Rate withheld: 103 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.
Penalty disposition
ⓘ
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.$2K
proposed penalties
$2K
current assessed
$372
paid to date
$2K
outstanding
19 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2002-06-12.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
ⓘ
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.47.4%
significant & substantial
10.5%
high negligence or reckless
47.4%
reasonably likely or greater
15.8%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 0.0% low, 89.5% moderate, 10.5% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
Health sampling
ⓘ
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.Respirable coal dust
ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.
Last sampled: 2002-05-16, 24 years ago
ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.96%
within 1.5 mg/m3
24
samples
3.99
dust max (mg/m3)
15 samples taken by MSHA inspectors, 9 by the operator.
Most-sampled occupations
- HIGHWALL DRILL OPERATOR13
- BULLDOZER OPERATOR4
- HIGHLIFT OPERATOR/FRONT END LOADER3
Silica (quartz)
Last sampled: 2002-04-24, 24 years ago21.7
silica avg (%)
10
samples
28.5
silica max (%)
Most-sampled occupations
- HIGHWALL DRILL OPERATOR5
- BULLDOZER OPERATOR3
- HIGHLIFT OPERATOR/FRONT END LOADER1
Noise
ⓘ
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.
Last sampled: 2001-11-08, 24 years ago
ⓘ
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.0%
over PEL
5
samples
Most-sampled occupations
- HIGHWALL DRILL OPERATOR2
- BULLDOZER OPERATOR1
- HIGHLIFT OPERATOR/FRONT END LOADER1
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.
No reportable incidents on file.
MSHA has no recorded reportable accidents associated with this operator.
For insurers, brokers, and safety consultants
Where Rock & Roll Coal, Inc. stands on silica, penalties, and injury rate
MSHA's standard limits respirable silica to 50 micrograms per cubic metre, but MSHA publishes dust and quartz as separate files and never the silica figure itself. We derive it per sample, score it against the limit, and set the operator's injury rate against a benchmark built from the full MSHA operator record. With the 26-year penalty trail, contest posture, and fatality history. Delivered as a PDF with the underlying data as CSV.
The federal record itself stays free on this site. What costs money, and why.