Mining Incidents

Signal Peak Energy LLC: 1 recorded fatality operator

Controlled by Global Mining Group LLC
MSHA operator ID: 0094245

Watch this operator

Email me when a new MSHA incident is filed at any Signal Peak Energy LLC mine.

Fatalities
1
Total incidents
175
Mines on record
1
Years on record
2009–2026
Compliance record
MSHA citations since 2008
2,036
citations
190
significant & substantial
$1,674,971
proposed penalties
$1,259,448
paid to date
75% of proposed penalties paid to date, a $415,523 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2008
189
inspections on record
49,843
inspection hours
4.1
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
2,036 citations across 49,843 inspection hours.
Source: MSHA inspections data, updated weekly.
Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$1.7M
proposed penalties
$1.3M
current assessed
$1.3M
paid to date
$7K
outstanding
1,980 assessments are final orders; 122 contested dockets.
Of $1.5M in penalties contested before the Commission, $879K was upheld in final decisions.
As of the most recent assessment on 2026-06-22.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
9.5%
significant & substantial
5.8%
high negligence or reckless
9.4%
reasonably likely or greater
17.5%
permanently disabling or fatal if injury occurs
Negligence coding: 0.1% none, 22.8% low, 71.2% moderate, 5.7% high, 0.2% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
Injury rate, 2025
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
2.83
total case rate
1.62
days-away rate
0.000
fatality rate
Below average. The US coal mining average was 3.19 and the all-US-mining average was 1.97 cases per 100 workers.
Year total case rate days-away fatal
2026 0.86 0.86 0.000
2025 2.83 1.62 0.000
2024 4.66 2.87 0.000
2023 2.80 1.55 0.000
2022 3.71 2.88 0.000
2021 2.40 1.60 0.000
2020 2.54 2.18 0.000
2019 2.28 0.65 0.000
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Respirable coal dust
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.

Last sampled: 2026-08-15
98%
within 1.5 mg/m3
6,571
samples
15.13
dust max (mg/m3)
11
over MSHA ECV
The excessive concentration value (ECV) is MSHA's own per-sample enforcement threshold, which builds in measurement uncertainty; a sample over its ECV can trigger a citation. The count covers only samples MSHA assigned an ECV.
1,578 samples taken by MSHA inspectors, 4,993 by the operator.
Most-sampled occupations
  • CONTINUOUS MINER OPERATOR1,410
  • LONGWALL OPERATOR (TAILGATE SIDE)1,000
  • ROOF BOLTER (TWIN HEAD) (RETURN SIDE)941

Silica (quartz)

Last sampled: 2026-07-30
6.0
silica avg (%)
435
samples
21.6
silica max (%)
Most-sampled occupations
  • CONTINUOUS MINER OPERATOR96
  • ROOF BOLTER (TWIN HEAD) (RETURN SIDE)83
  • LONGWALL OPERATOR (TAILGATE SIDE)60

Noise
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.

Last sampled: 2026-07-21
15%
over PEL
720
samples
Most-sampled occupations
  • BULLDOZER OPERATOR95
  • CONTINUOUS MINER OPERATOR54
  • ROOF BOLTER (TWIN HEAD) (RETURN SIDE)48
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.
When citations were contested
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
261 citations taken to the federal commission · 13% of citations on record
  • Settled 249 · 95%
  • Stood as issued 6 · 2%
  • Still open 6 · 2%
60%
S&S designation survived the contest
Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.
of 151 decided S&S contests · industry: 79%
32%
Penalty reduction in decided contests
$1.3M proposed, $849K after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2026-05-26. Vacated and withdrawn citations are removed from the file this view attributes through, so that outcome is slightly undercounted here.
Contested penalties
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this operator contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
Docket Decision Judge Year Proposed / upheld
WEST 2014-168 Settlement Manning 2014 $122K → $59K
WEST 2013-1020 Settlement Manning 2014 $105K → $84K
WEST 2012-480 Settlement Manning 2013 $105K → $52K
WEST 2012-26 Settlement Manning 2012 $105K → $52K
WEST 2012-875 Settlement Manning 2013 $102K → $51K
WEST 2013-170 Settlement Manning 2013 $95K → $81K
Source: FMSHRC civil penalty dockets and decisions (public record), updated weekly.

Top causes

Incident timeline

2026
2
2025
11
2024
22
2023
12
2022
10
2021
9
2020
9
2019
7
2018
3
2017
1
2016
1
2015
3
2014
4
2013
7
2012
9
2011
15
2010
26 (1f)
2009
24

Mines on record

Fatalities under this operator

1 recorded
January 2, 2010 MT · Coal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech Fatality · POWERED HAULAGE
Signal Peak Energy LLC · Struck by falling object

1ton dodge truck was up on jack stands with front wheels off ground,employee was under front of truck bleeding the power steering system,he asked another employee to get in truck and start the engine. The truck was started and the employees foot slipped off the clutch and the truck fell off the jack stands falling to the floor crushing the employee under truck.

For insurers, brokers, and safety consultants

Where Signal Peak Energy LLC stands on silica, penalties, and injury rate

MSHA's standard limits respirable silica to 50 micrograms per cubic metre, but MSHA publishes dust and quartz as separate files and never the silica figure itself. We derive it per sample, score it against the limit, and set the operator's injury rate against a benchmark built from the full MSHA operator record. With the 26-year penalty trail, contest posture, and fatality history. Delivered as a PDF with the underlying data as CSV.

The federal record itself stays free on this site. What costs money, and why.

See a sample report
Need a different cut of the data? Ask us