Mining Incidents

Sisecam Wyoming, LLC: 2 recorded fatalities operator

MSHA operator ID: L14409

Watch this operator

Email me when a new MSHA incident is filed at any Sisecam Wyoming, LLC mine.

Fatalities
2
Total incidents
292
Mines on record
1
Years on record
1996–2026
Compliance record
MSHA citations since 2000
1,787
citations
297
significant & substantial
$739,209
proposed penalties
$664,748
paid to date
90% of proposed penalties paid to date, a $74,461 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2000
1,185
inspections on record
26,826
inspection hours
6.7
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
1,787 citations across 26,826 inspection hours.
Source: MSHA inspections data, updated weekly.
Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$739K
proposed penalties
$665K
current assessed
$665K
paid to date
$0
outstanding
1,751 assessments are final orders; 27 contested dockets.
Of $223K in penalties contested before the Commission, $137K was upheld in final decisions.
As of the most recent assessment on 2026-04-13.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
16.8%
significant & substantial
4.6%
high negligence or reckless
17.0%
reasonably likely or greater
48.3%
permanently disabling or fatal if injury occurs
Negligence coding: 0.1% none, 11.9% low, 83.5% moderate, 4.6% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
Injury rate, 2025
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.23
total case rate
0.23
days-away rate
0.000
fatality rate
Below average. The US metal and nonmetal mining average was 1.65 and the all-US-mining average was 1.97 cases per 100 workers.
Year total case rate days-away fatal
2026 0.00 0.00 0.000
2025 0.23 0.23 0.000
2024 0.23 0.23 0.000
2023 0.45 0.23 0.000
2022 0.94 0.47 0.000
2021 0.73 0.24 0.000
2020 0.53 0.00 0.000
2019 2.25 0.25 0.000
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2026-04-20
10%
of limit-tested samples over the exposure limit
170
samples
100
limit-tested
Most sampled contaminants
  • Quartz, respirable, >1% Qtz6710 over
  • Unlisted Particulate, respirable, <1% Qtz38
  • Diesel particulate (total carbon)19
  • Nuisance dust, respirable, <1% Qtz17

Area samples (mill and shop air)

Last sampled: 2025-12-12
4
samples
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.
When citations were contested
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
84 citations taken to the federal commission · 5% of citations on record
  • Settled 75 · 89%
  • Stood as issued 9 · 11%
77%
S&S designation survived the contest
Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.
of 57 decided S&S contests · industry: 79%
36%
Penalty reduction in decided contests
$211K proposed, $136K after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2024-12-04. Vacated and withdrawn citations are removed from the file this view attributes through, so that outcome is slightly undercounted here.
Contested penalties
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this operator contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
Docket Decision Judge Year Proposed / upheld
WEST 2006-62M Settlement Melick 2006 $71K → $56K
WEST 2022-0370 Settlement 2023 $22K → $2K
WEST 2020-0171 Settlement Miller 2020 $18K → $14K
WEST 2011-365 Dismissal Manning 2011 $18K → $16K
WEST 2017-0217 Settlement Manning 2017 $16K → $14K
WEST 2023-0288 Vacate Simonton 2023 $14K → $2K
Source: FMSHRC civil penalty dockets and decisions (public record), updated weekly.

Top causes

Incident timeline

2026
1
2025
3
2024
2
2023
3
2022
4
2021
4
2020
5
2019
11
2018
5
2017
5
2016
5
2015
5
2014
13
2013
7
2012
11
2011
2
2010
8
2009
18
2008
16
2007
14
2006
24
2005
11 (1f)
2004
24 (1f)
2003
9
2002
11
2001
8
2000
11
1999
5
1998
18
1997
17
1996
12

Mines on record

Fatalities under this operator

2 recorded
April 4, 2005 WY · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech Fatality · POWERED HAULAGE
Sisecam Wyoming, LLC · Caught in, under or between a moving and a stationary object

EE WAS ASSEMBLING CONTINUOUS MINER(CM04) IN UPPER BED REBUILD MAINTENANCE SHOP. CREW HAD JUST COMPLETED INSTALLATION OF RIGHT HAND CUTTING HEAD MOTOR. OTHER EE OPERATING EIMCO 913 #4 WAS TRAMMING BACKWARD UP NORTH SHOP ACCESS ROAD. OTHER EE TURNED EIMCO OFF TO COMMUNICATE W/SUPERVISOR, EIMCO ROLLED FORWARD, PINNING EE BETWEEN EIMCO FORKS AND CUTTING MOTOR.

February 1, 2004 WY · Metal/Non-Metal roof bolter, rock bolter, pinner, mobile roof support operator (mrs) Fatality · MACHINERY
Sisecam Wyoming, LLC · Caught in, under or between a moving and a stationary object

WHILE BACKING OUT OF THE FIRST HALFPASS, THE VICTIM EXITED THE BOLTER COMPARTMENT AND WAS THEN PINCHED BETWEEN THE MINER TAIL AND THE RIB. ACCIDENT RESULTED IN DEATH TO THE EMPLOYEE.

For insurers, brokers, and safety consultants

Where Sisecam Wyoming, LLC stands on silica, penalties, and injury rate

MSHA's standard limits respirable silica to 50 micrograms per cubic metre, but MSHA publishes dust and quartz as separate files and never the silica figure itself. We derive it per sample, score it against the limit, and set the operator's injury rate against a benchmark built from the full MSHA operator record. With the 26-year penalty trail, contest posture, and fatality history. Delivered as a PDF with the underlying data as CSV.

The federal record itself stays free on this site. What costs money, and why.

See a sample report
Need a different cut of the data? Ask us