Mining Incidents

Taft Coal Sales & Associates Incorporated: 3 recorded fatalities operator

MSHA operator ID: P22745

Watch this operator

Email me when a new MSHA incident is filed at any Taft Coal Sales & Associates Incorporated mine.

Fatalities
3
Total incidents
72
Mines on record
6
Years on record
1990–2014
Compliance record
MSHA citations since 2000
185
citations
53
significant & substantial
$32,938
proposed penalties
$31,942
paid to date
97% of proposed penalties paid to date, a $996 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2000
142
inspections on record
3,849
inspection hours
4.8
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
185 citations across 3,849 inspection hours.
Source: MSHA inspections data, updated weekly.
Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$33K
proposed penalties
$32K
current assessed
$32K
paid to date
$0
outstanding
179 assessments are final orders; 1 contested dockets.
Of $1K in penalties contested before the Commission, $336 was upheld in final decisions.
As of the most recent assessment on 2015-04-16.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
29.4%
significant & substantial
1.7%
high negligence or reckless
29.4%
reasonably likely or greater
6.7%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 13.3% low, 85.0% moderate, 1.7% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
Injury rate, 2015
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
Below average. The US coal mining average was 3.76 and the all-US-mining average was 2.72 cases per 100 workers.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2015 * 0.00 0.00 0.000
2014 1.41 0.00 0.000
2013 1.64 1.64 0.000
2012 1.07 0.54 0.537
2011 0.00 0.00 0.000
2010 0.54 0.54 0.545
2009 0.00 0.00 0.000
2008 0.75 0.00 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Respirable coal dust
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.

Last sampled: 2016-01-07, 10 years ago
98%
within 1.5 mg/m3
537
samples
5.89
dust max (mg/m3)
0
over MSHA ECV
The excessive concentration value (ECV) is MSHA's own per-sample enforcement threshold, which builds in measurement uncertainty; a sample over its ECV can trigger a citation. The count covers only samples MSHA assigned an ECV.
284 samples taken by MSHA inspectors, 253 by the operator.
Most-sampled occupations
  • HIGHWALL DRILL OPERATOR256
  • BULLDOZER OPERATOR149
  • REFUSE TRUCK DRIVER/BACKFILL TRUCK DRIVE58

Silica (quartz)

Last sampled: 2014-10-28, 11 years ago
13.0
silica avg (%)
45
samples
25.4
silica max (%)
Most-sampled occupations
  • HIGHWALL DRILL OPERATOR33
  • BULLDOZER OPERATOR10
  • REFUSE TRUCK DRIVER/BACKFILL TRUCK DRIVE2

Noise
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.

Last sampled: 2016-01-07, 10 years ago
3%
over PEL
148
samples
Most-sampled occupations
  • BULLDOZER OPERATOR39
  • HIGHWALL DRILL OPERATOR31
  • REFUSE TRUCK DRIVER/BACKFILL TRUCK DRIVE31
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.
When citations were contested
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
3 citations taken to the federal commission · 2% of citations on record
  • Settled 3 · 100%
0%
S&S designation survived the contest
Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.
of 3 decided S&S contests · industry: 79%
75%
Penalty reduction in decided contests
$1K proposed, $336 after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2011-04-08. Vacated and withdrawn citations are removed from the file this view attributes through, so that outcome is slightly undercounted here.
Contested penalties
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this operator contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
Docket Decision Judge Year Proposed / upheld
SE 2011-441 Settlement Bulluck 2014 $1K → $336
Source: FMSHRC civil penalty dockets and decisions (public record), updated weekly.

Top causes

Incident timeline

2014
1
2013
2
2012
3 (1f)
2011
2
2010
2 (1f)
2009
3
2008
3
2007
5
2006
4
2005
9
2004
5
2003
2
2002
6
2001
4
1999
3
1998
3
1997
6
1995
1
1994
2
1993
1
1992
2 (1f)
1991
1
1990
2

Mines on record

Fatalities under this operator

3 recorded
December 14, 2012 AL · Coal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver Fatality · SLIP OR FALL OF PERSON
Taft Coal Sales & Associates Incorporated · Fall from machine

Employee was climbing up ladder onto Rock Truck when his feet slipped out from under him causing him to fall to the ground.*** Note added Employee died 12/28/12 from complications related to this injury per fatal ruling/notification on 6/27/13 from MSHA.

June 8, 2010 AL · Coal pumper Fatality · IGNITION OR EXPLOSION OF GAS OR DUST
Taft Coal Sales & Associates Incorporated · Contact with hot objects or substances

The Service Truck Operator was refueling a drill rig when an ignition from an unknown source resulted in fatal burns.

January 20, 1992 AL · Coal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver Fatality · HANDLING OF MATERIALS
Taft Coal Sales & Associates Inc · Caught in, under or between two or more moving objects

15095DEPENDENT HAULER WAS DELIVERING 2 SPOOLS OF WIRE ROPE.DURING THE UNLOADING PROCESS AN UNRESTRAINED ROLLED,PINNING THE TRUCK DRIVER BETWEEN THE REELS.THE VICTIM APPEARED TO HAVE SUSTAINED 76229BLE FRACTURES TO THE PELVIC AREA.

For insurers, brokers, and safety consultants

Where Taft Coal Sales & Associates Incorporated stands on silica, penalties, and injury rate

MSHA's standard limits respirable silica to 50 micrograms per cubic metre, but MSHA publishes dust and quartz as separate files and never the silica figure itself. We derive it per sample, score it against the limit, and set the operator's injury rate against a benchmark built from the full MSHA operator record. With the 26-year penalty trail, contest posture, and fatality history. Delivered as a PDF with the underlying data as CSV.

The federal record itself stays free on this site. What costs money, and why.

See a sample report
Need a different cut of the data? Ask us