Mining Incidents

West Ridge Resources Inc: 1 recorded fatality operator

Controlled by Robert E Murray
MSHA operator ID: P24143

Watch this operator

Email me when a new MSHA incident is filed at any West Ridge Resources Inc mine.

Fatalities
1
Total incidents
308
Mines on record
1
Years on record
2000–2016
Compliance record
MSHA citations since 2000
2,769
citations
802
significant & substantial
$2,766,231
proposed penalties
$1,834,103
paid to date
66% of proposed penalties paid to date, a $932,128 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2000
1,302
inspections on record
37,506
inspection hours
7.4
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
2,769 citations across 37,506 inspection hours.
Source: MSHA inspections data, updated weekly.
Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$2.8M
proposed penalties
$1.8M
current assessed
$1.8M
paid to date
$0
outstanding
2,725 assessments are final orders; 118 contested dockets.
Of $2.3M in penalties contested before the Commission, $1.3M was upheld in final decisions.
As of the most recent assessment on 2020-06-19.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
29.3%
significant & substantial
10.0%
high negligence or reckless
29.4%
reasonably likely or greater
10.0%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 7.9% low, 82.1% moderate, 9.9% high, 0.1% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
Injury rate, 2015
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
4.82
total case rate
1.38
days-away rate
0.000
fatality rate
Above average. The US coal mining average was 3.76 and the all-US-mining average was 2.72 cases per 100 workers.
Year total case rate days-away fatal
2015 4.82 1.38 0.000
2014 4.89 1.63 0.408
2013 9.14 4.57 0.000
2012 8.46 4.70 0.000
2011 9.87 5.71 0.000
2010 8.81 2.52 0.000
2009 7.63 5.58 0.000
2008 8.43 4.72 0.000
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Respirable coal dust
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.

Last sampled: 2016-10-06, 9 years ago
94%
within 1.5 mg/m3
3,351
samples
7.49
dust max (mg/m3)
5
over MSHA ECV
The excessive concentration value (ECV) is MSHA's own per-sample enforcement threshold, which builds in measurement uncertainty; a sample over its ECV can trigger a citation. The count covers only samples MSHA assigned an ECV.
1,622 samples taken by MSHA inspectors, 1,729 by the operator.
Most-sampled occupations
  • CONTINUOUS MINER OPERATOR1,105
  • JACK SETTER (LONGWALL)540
  • MAINTENANCE FOREMAN151

Silica (quartz)

Last sampled: 2015-12-09, 10 years ago
4.0
silica avg (%)
171
samples
41.6
silica max (%)
Most-sampled occupations
  • CONTINUOUS MINER OPERATOR59
  • JACK SETTER (LONGWALL)59
  • MAINTENANCE FOREMAN4

Noise
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.

Last sampled: 2016-06-16, 10 years ago
5%
over PEL
392
samples
Most-sampled occupations
  • CONTINUOUS MINER OPERATOR37
  • MECHANIC34
  • ROOF BOLTER (TWIN HEAD) (RETURN SIDE)32
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.
When citations were contested
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
905 citations taken to the federal commission · 33% of citations on record
  • Settled 847 · 94%
  • Stood as issued 58 · 6%
89%
S&S designation survived the contest
Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.
of 376 decided S&S contests · industry: 79%
42%
Penalty reduction in decided contests
$2.2M proposed, $1.3M after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2017-07-18. Vacated and withdrawn citations are removed from the file this view attributes through, so that outcome is slightly undercounted here.
Contested penalties
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this operator contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
Docket Decision Judge Year Proposed / upheld
WEST 2015-0890 Settlement Gill 2018 $140K → $70K
WEST 2009-318 Settlement Feldman 2011 $138K → $83K
WEST 2008-809 Settlement Manning 2010 $119K → $8K
WEST 2008-736 Settlement Manning 2011 $95K → $29K
WEST 2014-0780 Settlement Gill 2015 $93K → $28K
WEST 2009-42 Settlement 2011 $81K → $49K
Source: FMSHRC civil penalty dockets and decisions (public record), updated weekly.

Top causes

Incident timeline

2016
1
2015
8
2014
12 (1f)
2013
24
2012
31
2011
40
2010
29
2009
28
2008
26
2007
29
2006
20
2005
15
2004
15
2003
9
2002
6
2001
7
2000
8

Mines on record

Fatalities under this operator

1 recorded
September 16, 2014 UT · Coal shuttle car operator, mantrip operator, ramcar operator, rail runner, buggy operator Fatality · POWERED HAULAGE
West Ridge Resources Inc · Caught in, under or between a moving and a stationary object

EE was operating the company #24-43 Wagner ST 2DS Can-setter at x-cut #11 in B Canyon,#2 entry in the 23rd East intake. When the victim was found, he was unconscious & unresponsive, his mid torso was pinned in the articulation area of the machine. His feet were in the cab & he was seated in the seat. CPR was administered. The victim was pronounced dead upon arriving on the surface.

For insurers, brokers, and safety consultants

Where West Ridge Resources Inc stands on silica, penalties, and injury rate

MSHA's standard limits respirable silica to 50 micrograms per cubic metre, but MSHA publishes dust and quartz as separate files and never the silica figure itself. We derive it per sample, score it against the limit, and set the operator's injury rate against a benchmark built from the full MSHA operator record. With the 26-year penalty trail, contest posture, and fatality history. Delivered as a PDF with the underlying data as CSV.

The federal record itself stays free on this site. What costs money, and why.

See a sample report
Need a different cut of the data? Ask us