43% of proposed penalties paid to date, a $3,196 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2000
18
inspections on record
442
inspection hours
n/a
citations per 100 inspection hours
ⓘThis rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 442 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.
Penalty disposition
ⓘDifferences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$6K
proposed penalties
$2K
current assessed
$2K
paid to date
$0
outstanding
9 assessments are final orders; 2 contested dockets.
Of $3K in penalties contested before the Commission, $2K was upheld in final decisions.
As of the most recent assessment on 2001-03-14.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
ⓘShares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
Source: MSHA violations gravity and negligence coding, updated weekly.
Injury rate, 2001
ⓘThis rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
2.65
total case rate
1.33
days-away rate
0.000
fatality rate
Below average. The US coal mining average was 6.94 and the all-US-mining average was 5.26 cases per 100 workers.
Year
total case rate
days-away
fatal
2001
2.65
1.33
0.000
2000
7.48
2.49
0.000
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Health sampling
ⓘA sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.
Respirable coal dust
ⓘRespirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.
Last sampled: 2001-03-14, 25 years ago
100%
within 1.5 mg/m3
14
samples
0.47
dust max (mg/m3)
12 samples taken by MSHA inspectors, 2 by the operator.
Most-sampled occupations
MECHANIC5
BULLDOZER OPERATOR2
COAL TRUCK DRIVER2
Noise
ⓘThe share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.
Contested penalties
ⓘA reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this operator contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
July 29, 1987MT · Coaldrill operatorFatality · MACHINERY
Western Energy Company · Struck against a moving object
A DRILLER 8'10"3FT OVERBURDEN VERTINAL DRILL UNIT NO. W 7033, HAD JUST BEEN POSITIONED ABOUT 30FT AWAY AND PARALLEL TO THE HIGHWALL EDGE IN AREA D, BY THE VICTIM, WHEN THE REAR LEFT LEVELING JACK SANK INTO3THE GROUND, CAUSING THE DRILTECH TO OVERTURN. THE VICTIM, BEING ON THE DRILL BENCH, WAS BETWEEN THE DRILTECH AND HIGHWALL EDGE WHEN HE WAS STRUCK AND CARRIED WITHT THE MACHINE
For insurers, brokers, and safety consultants
Where Western Energy Company stands on silica, penalties, and injury rate
MSHA's standard limits respirable silica to 50 micrograms per cubic metre, but MSHA publishes
dust and quartz as separate files and never the silica figure itself. We derive it per sample,
score it against the limit, and set the operator's injury rate against a benchmark built from
the full MSHA operator record. With the 26-year penalty trail, contest posture, and fatality
history. Delivered as a PDF with the underlying data as CSV.