Mining Incidents

Western Kentucky Resources, LLC: 26 MSHA citations operator

MSHA operator ID: 0155756

Watch this operator

Email me when a new MSHA incident is filed at any Western Kentucky Resources, LLC mine.

Fatalities
0
Total incidents
0
Mines on record
0
Years on record
Compliance record
MSHA citations since 2018
26
citations
3
significant & substantial
$4,944
proposed penalties
$4,328
paid to date
88% of proposed penalties paid to date, a $616 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2018
12
inspections on record
395
inspection hours
n/a
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 395 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.
Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$5K
proposed penalties
$5K
current assessed
$4K
paid to date
$616
outstanding
26 assessments are final orders; 1 contested dockets.
Of $746 in penalties contested before the Commission, $746 was upheld in final decisions.
As of the most recent assessment on 2019-08-14.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
11.5%
significant & substantial
19.2%
high negligence or reckless
11.5%
reasonably likely or greater
3.8%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 3.8% low, 76.9% moderate, 19.2% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
Injury rate, 2018
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
No reportable injury cases in any year shown. Employee-hours were reported in each of those years, so these are true zeros rather than missing data. Citations, listed in the compliance record above, are inspector-found violations and are counted separately from worker injuries.
Below average. The US coal mining average was 3.34 and the all-US-mining average was 2.33 cases per 100 workers.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Respirable coal dust
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.

Last sampled: 2019-08-14, 7 years ago
100%
within 1.5 mg/m3
30
samples
0.21
dust max (mg/m3)
0
over MSHA ECV
The excessive concentration value (ECV) is MSHA's own per-sample enforcement threshold, which builds in measurement uncertainty; a sample over its ECV can trigger a citation. The count covers only samples MSHA assigned an ECV.
16 samples taken by MSHA inspectors, 14 by the operator.
Most-sampled occupations
  • BULLDOZER OPERATOR17
  • HIGHWALL DRILL OPERATOR5
  • SAFETY DIRECTOR3

Silica (quartz)

Last sampled: 2018-11-14, 7 years ago
37.9
silica avg (%)
1
samples
37.9
silica max (%)
Most-sampled occupations
  • BULLDOZER OPERATOR1

Noise
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.

Last sampled: 2019-02-25, 7 years ago
0%
over PEL
12
samples
Most-sampled occupations
  • BULLDOZER OPERATOR5
  • REFUSE TRUCK DRIVER/BACKFILL TRUCK DRIVE2
  • STRIPPING SHOVEL OPERATOR2
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.
When citations were contested
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
3 citations taken to the federal commission · 12% of citations on record
  • Settled 3 · 100%
0%
Penalty reduction in decided contests
$746 proposed, $746 after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2020-02-18. Vacated and withdrawn citations are removed from the file this view attributes through, so that outcome is slightly undercounted here.
Contested penalties
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this operator contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
Docket Decision Judge Year Proposed / upheld
KENT 2020-0067 Settlement Rae 2020 $746 → $746
Source: FMSHRC civil penalty dockets and decisions (public record), updated weekly.

No reportable incidents on file.

MSHA has no recorded reportable accidents associated with this operator.

For insurers, brokers, and safety consultants

Where Western Kentucky Resources, LLC stands on silica, penalties, and injury rate

MSHA's standard limits respirable silica to 50 micrograms per cubic metre, but MSHA publishes dust and quartz as separate files and never the silica figure itself. We derive it per sample, score it against the limit, and set the operator's injury rate against a benchmark built from the full MSHA operator record. With the 26-year penalty trail, contest posture, and fatality history. Delivered as a PDF with the underlying data as CSV.

The federal record itself stays free on this site. What costs money, and why.

See a sample report
Need a different cut of the data? Ask us