Mining Incidents
Search Operators Mines Alerts Research Controllers Fatalgrams About
English Español
← All controllers

David D Svonavec: 103 MSHA citations controller

MSHA controller ID: C05167

Watch this controller

Email me when a new MSHA incident is filed at any mine David D Svonavec controls.

Fatalities
0
Total incidents
6
Mines on record
2
Years on record
1983–2010
Compliance record
MSHA citations since 2000
103
citations
50
significant & substantial
$23,602
proposed penalties
$19,727
paid to date
84% of proposed penalties paid to date, a $3,875 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2000
112
inspections on record
1,305
inspection hours
7.9
citations per 100 inspection hours
ⓘ This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
103 citations across 1,305 inspection hours.
Source: MSHA inspections data, updated weekly.
Penalty disposition
ⓘ Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$24K
proposed penalties
$20K
current assessed
$20K
paid to date
$0
outstanding
103 assessments are final orders; 2 contested dockets.
Of $10K in penalties contested before the Commission, $6K was upheld in final decisions.
As of the most recent assessment on 2020-04-07.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
ⓘ Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
48.5%
significant & substantial
12.6%
high negligence or reckless
48.5%
reasonably likely or greater
34.0%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 14.6% low, 72.8% moderate, 11.7% high, 1.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
Injury rate, 2010
ⓘ This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
Below average. The US metal and nonmetal mining average was 2.68 and the all-US-mining average was 3.20 cases per 100 workers.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2010 * 0.00 0.00 0.000
2009 * 0.00 0.00 0.000
2008 * 0.00 0.00 0.000
2007 * 0.00 0.00 0.000
2006 * 0.00 0.00 0.000
2005 * 7.34 7.34 0.000
2004 * 0.00 0.00 0.000
2003 * 0.00 0.00 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Health sampling
ⓘ A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Respirable coal dust
ⓘ Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.

Last sampled: 2011-05-25, 15 years ago
100%
within 1.5 mg/m3
216
samples
1.60
dust max (mg/m3)
101 samples taken by MSHA inspectors, 115 by the operator.
Most-sampled occupations
  • CRUSHER ATTENDANT86
  • ROTARY BUCKET EXCAVATOR OPERATOR41
  • BULLDOZER OPERATOR32

Silica (quartz)

Last sampled: 2010-03-05, 16 years ago
18.3
silica avg (%)
18
samples
36.5
silica max (%)
Most-sampled occupations
  • CRUSHER ATTENDANT9
  • HIGHLIFT OPERATOR/FRONT END LOADER2
  • REFUSE TRUCK DRIVER/BACKFILL TRUCK DRIVE2
See US coal mines ranked by silica in their dust samples.

Noise
ⓘ The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.

Last sampled: 2011-03-24, 15 years ago
0%
over PEL
37
samples
Most-sampled occupations
  • HIGHLIFT OPERATOR/FRONT END LOADER10
  • CRUSHER ATTENDANT6
  • REFUSE TRUCK DRIVER/BACKFILL TRUCK DRIVE6
See US mines ranked by noise samples over the legal limit.

Metal and nonmetal contaminants (personal samples)
ⓘ Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2015-10-27, 10 years ago
0%
of limit-tested samples over the exposure limit
4
samples
3
limit-tested
Most sampled contaminants
  • Arsenic dust1
  • Beryllium dust1
  • Cadmium dust & salts1
  • Chromium, soluble1
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.
When citations were contested
ⓘ Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
5 citations taken to the federal commission · 5% of citations on record
  • Settled 5 · 100%
100%
S&S designation survived the contest
ⓘ Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.
of 5 decided S&S contests · industry: 79%
39%
Penalty reduction in decided contests
$10K proposed, $6K after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2008-08-26. Vacated and withdrawn citations are removed from the file this view attributes through, so that outcome is slightly undercounted here.
Contested penalties
ⓘ A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this controller contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
Docket Decision Judge Year Proposed / upheld
PENN 2008-571 Settlement Melick 2011 $7K → $4K
Penn 2007-69 Settlement Bulluck 2007 $3K → $2K
Source: FMSHRC civil penalty dockets and decisions (public record), updated weekly.

Top causes

Incident timeline

2010
1
2005
1
1998
1
1983
3

Operators under this controller

Mines on record

For insurers, brokers, and safety consultants

Where David D Svonavec stands on silica, penalties, and injury rate

MSHA's standard limits respirable silica to 50 micrograms per cubic metre, but MSHA publishes dust and quartz as separate files and never the silica figure itself. We derive it per sample, score it against the limit, and set the operator's injury rate against a benchmark built from the full MSHA operator record. With the 26-year penalty trail, contest posture, and fatality history. Delivered as a PDF with the underlying data as CSV.

The federal record itself stays free on this site. What costs money, and why.

See a sample report
Need a different cut of the data? Ask us