Mining Incidents

ITT Corporation: 2 recorded fatalities controller

MSHA controller ID: C00341

Watch this controller

Email me when a new MSHA incident is filed at any mine ITT Corporation controls.

Fatalities
2
Total incidents
168
Mines on record
10
Years on record
1983–2011
Compliance record
MSHA citations since 2006
16
citations
3
significant & substantial
$1,347
proposed penalties
$1,347
paid to date
100% of proposed penalties paid to date, a $0 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2006
19
inspections on record
720
inspection hours
n/a
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 720 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.
Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$1K
proposed penalties
$1K
current assessed
$1K
paid to date
$0
outstanding
16 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2011-08-18.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
18.8%
significant & substantial
0.0%
high negligence or reckless
18.8%
reasonably likely or greater
12.5%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 25.0% low, 75.0% moderate, 0.0% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Respirable coal dust
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.

Last sampled: 2011-06-01, 15 years ago
100%
within 1.5 mg/m3
42
samples
0.52
dust max (mg/m3)
42 samples taken by MSHA inspectors, 0 by the operator.
Most-sampled occupations
  • FORKLIFT OPERATOR13
  • LABORER/BLACKSMITH12
  • HIGHLIFT OPERATOR/FRONT END LOADER7

Noise
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.

Last sampled: 2011-01-03, 15 years ago
0%
over PEL
28
samples
Most-sampled occupations
  • LABORER/BLACKSMITH9
  • FORKLIFT OPERATOR8
  • DRYER OPERATOR3
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.

Top causes

Incident timeline

2011
1
1990
1
1989
4
1988
9
1987
19 (1f)
1986
31
1985
33
1984
33 (1f)
1983
37

Operators under this controller

Mines on record

Fatalities under this controller

2 recorded
June 11, 1987 KY · Coal electrician, lineman Fatality · POWERED HAULAGE
Kentucky Carbon Corp · Caught in, under or between a moving and a stationary object

THE EMPLOYEE WA8 USING A PERSONNEL CARRIER TO PULL THE CONVEYOR CHAIN ON THE CONTINUOUS MINER (JOY 14-CM5) BY USING A CHAIN HOIST BETWEEN THE TWO PIECES OF EQUIPMENT. THE EMPLOYEE WAS FATALLY INJURED WHEN T2E PERSONNEL CARRIER RAN UP UNDER THEBOOM OF THE MINER.

June 27, 1984 WV · Coal electrician, lineman Fatality · POWERED HAULAGE
United States Steel Mining Company Inc · Caught in, under or between a moving and a stationary object

INJURED WAS OBSERVING THE DISCHARGE CHAIN SPROCKET ON THE RECEIVING END OF 21 S/C BY PLACING HIS HEAD BETWEEN THE BUMPER AND TRAM MOTOR WHEN THE S/C SUDDENLY MOVED, CATCHING HIS HEAD BETWEEN T HE S/CAR AND MINE FLOOR

For insurers, brokers, and safety consultants

Where ITT Corporation stands on silica, penalties, and injury rate

MSHA's standard limits respirable silica to 50 micrograms per cubic metre, but MSHA publishes dust and quartz as separate files and never the silica figure itself. We derive it per sample, score it against the limit, and set the operator's injury rate against a benchmark built from the full MSHA operator record. With the 26-year penalty trail, contest posture, and fatality history. Delivered as a PDF with the underlying data as CSV.

The federal record itself stays free on this site. What costs money, and why.

See a sample report
Need a different cut of the data? Ask us