Mining Incidents
Search Operators Mines Alerts Research Controllers Fatalgrams About
English Español
← All controllers

James A Hubbard: 480 MSHA citations controller

MSHA controller ID: C14433

Watch this controller

Email me when a new MSHA incident is filed at any mine James A Hubbard controls.

Fatalities
0
Total incidents
79
Mines on record
8
Years on record
1992–2001
Compliance record
MSHA citations since 2000
480
citations
212
significant & substantial
$62,894
proposed penalties
$0
paid to date
0% of proposed penalties paid to date, a $62,894 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2000
116
inspections on record
2,611
inspection hours
18.4
citations per 100 inspection hours
ⓘ This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
480 citations across 2,611 inspection hours.
Source: MSHA inspections data, updated weekly.
Penalty disposition
ⓘ Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$63K
proposed penalties
$63K
current assessed
$0
paid to date
$63K
outstanding
456 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2003-04-21.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
ⓘ Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
46.4%
significant & substantial
3.1%
high negligence or reckless
46.5%
reasonably likely or greater
12.7%
permanently disabling or fatal if injury occurs
Negligence coding: 0.4% none, 4.8% low, 91.7% moderate, 3.1% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
Injury rate, 2002
ⓘ This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
Below average. The US coal mining average was 6.89 and the all-US-mining average was 5.05 cases per 100 workers.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2002 * 0.00 0.00 0.000
2000 * 17.96 17.96 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Health sampling
ⓘ A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Respirable coal dust
ⓘ Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.

Last sampled: 2004-01-07, 22 years ago
88%
within 1.5 mg/m3
379
samples
17.96
dust max (mg/m3)
191 samples taken by MSHA inspectors, 188 by the operator.
Most-sampled occupations
  • CONTINUOUS MINER OPERATOR82
  • CUTTING MACHINE OPERATOR53
  • MOBILE BRIDGE OPERATOR39

Silica (quartz)

Last sampled: 2002-05-30, 24 years ago
4.0
silica avg (%)
27
samples
7.2
silica max (%)
Most-sampled occupations
  • CONTINUOUS MINER OPERATOR10
See US coal mines ranked by silica in their dust samples.

Noise
ⓘ The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.

Last sampled: 2004-01-07, 22 years ago
3%
over PEL
37
samples
Most-sampled occupations
  • ROOF BOLTER (SINGLE HEAD)8
  • SCOOP CAR OPERATOR8
  • MOBILE BRIDGE OPERATOR5
See US mines ranked by noise samples over the legal limit.
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.

Top causes

Incident timeline

2001
1
2000
9
1999
29
1998
17
1997
3
1996
7
1995
3
1994
2
1993
6
1992
2

Operators under this controller

Mines on record

For insurers, brokers, and safety consultants

Where James A Hubbard stands on silica, penalties, and injury rate

MSHA's standard limits respirable silica to 50 micrograms per cubic metre, but MSHA publishes dust and quartz as separate files and never the silica figure itself. We derive it per sample, score it against the limit, and set the operator's injury rate against a benchmark built from the full MSHA operator record. With the 26-year penalty trail, contest posture, and fatality history. Delivered as a PDF with the underlying data as CSV.

The federal record itself stays free on this site. What costs money, and why.

See a sample report
Need a different cut of the data? Ask us