Mining Incidents

M G Hawkinson: 141 MSHA citations controller

MSHA controller ID: M02568

M G Hawkinson has had no fatalities among 3 reportable incidents since 1997. MSHA has proposed $18K in penalties since 2001.

Watch this controller

Email me when a new MSHA incident is filed at any mine M G Hawkinson controls.

Fatalities
0
Total incidents
3
Mines on record
2
Years on record
1997–2019
Compliance record
MSHA citations since 2001
141
citations
26
significant & substantial
$18,385
proposed penalties
$18,385
paid to date
100% of proposed penalties paid to date. The remaining $0 was reduced, settled, contested or is still owed.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2001
108
inspections on record
1,049
inspection hours
13.4
citations per 100 inspection hours
ⓘ This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
141 citations across 1,049 inspection hours.
Source: MSHA inspections data, updated weekly.
Imminent-danger orders
ⓘ A Section 107(a) order removes miners from an area when an inspector finds an imminent danger. Each order is lifted once the condition is corrected, so this counts orders issued, not orders now in effect.
1
Section 107(a) orders
Most recent order: 2018-10-11.
On record since 2018.
Source: MSHA imminent-danger order records, updated weekly.
Penalty disposition
ⓘ Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$18K
proposed penalties
$18K
current assessed
$18K
paid to date
$0
outstanding
135 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2025-10-20.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
ⓘ Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
18.6%
significant & substantial
2.1%
high negligence or reckless
18.6%
reasonably likely or greater
60.7%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 30.0% low, 67.9% moderate, 2.1% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
Health sampling
ⓘ A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
ⓘ Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2025-10-20
0%
of limit-tested samples over the exposure limit
22
samples
6
limit-tested
Most sampled contaminants
  • Respirable dust, <.1mg13
  • Quartz, respirable, >1% Qtz8
  • Unlisted Particulate, respirable, <1% Qtz1
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.

Top causes

Incident timeline

2019
1
1998
1
1997
1

Operators under this controller

Mines on record

For insurers, brokers, and safety consultants

Where M G Hawkinson stands on silica, penalties, and injury rate

MSHA's standard limits respirable silica to 50 micrograms per cubic metre, but MSHA publishes dust and quartz as separate files and never the silica figure itself. We derive it per sample, score it against the limit, and set the operator's injury rate against a benchmark built from the full MSHA operator record. With the 26-year penalty trail, contest posture, and fatality history. Delivered as a PDF with the underlying data as CSV.

The federal record itself stays free on this site. What costs money, and why.

See a sample report
Need a different cut of the data? Ask us