Employees were replacing protective wing shroud on the left side of the bucket on the 6020 excavator. While attempting to put the shroud in place, the shroud dropped unexpectedly pinching EE's fingers between the shroud and edge of the bucket. The shroud weighing approximately 40 pounds fell 10 inches before striking the employee's left 3rd finger causing fracture and laceration.
Had left hand resting on the steel side of the rock picking table when an approximately 200lb rock fell down from the feeder striking employee's hand. No initial treatment needed. Later, numbness developed and recommended surgery. Did not have knowledge of this until 7/8/25.
Employee was dismounting a 777 haul truck on mounted ladder located on the non-cab side. EE took a step onto the bumper ladder and when EE did, the steps swung, causing EE to throw off EE's balance. EE's right hand slipped off the ladder, spraining EE's middle finger.
Employee was placing machinery teeth on a pallet to be moved with the skid loader. A tooth fell off and landed on the ground and employee decided to pick up the 100+ pound tooth and place it back on the pallet while the skid loader was still in motion. Employee felt a pop in lower back and had instant pain
Standard threshold shift on a retest from 12/28/22 annual hearing test of left 10db.
Standard threshold shift on a retest from 12/20/2022 annual hearing test of left 10db and right 30db.
Standard threshold shift on a retest from 12/28/22 annual hearing test of left 17db and right 10db.
Standard Threshold Shift on a retest from 12/27/2022 annual hearing test.
The employee was working in the Logan breaker picking breaker rock. While unwedging a large rock that became wedged on the picking table between the divider and the side of the table, the employee put left hand on the side of the table to brace self near the feed chute and a rock came in and hit the tip of the ring finger
Employee was climbing down the ladder of a CAT 777B Haul Truck at end of shift. EE missed placing EE's right foot onto the last step and EE's right foot slid to the ground, causing left shoulder to hold EE's body weight. EE's right hand slid off ladder because EE was in the process of taking the step and was removing EE's right hand to slide it down the rail.
Removing a guard on the push arm of a 375A bulldozer to make a minor repair using a wrench. Wrench slipped and struck employee on right shin causing a laceration.
Employee was dismounting the D10 dozer at the end of EE shift. While utilizing steps and per Employee ""3 points of contact"", EE slipped off step located on blade arms, landing on EE's Left Side.
Employee was carrying a case of water down to cleaning plant and EE slipped on fresh snow/ice landing directly on back, knocking the wind out of EE. Employee continued to finish out the shift picking rock. On 1/31 EE left work early to seek treatment because still in pain from contusion.
Employee was in the process of placing the protective cap on an empty acetylene cylinder. When EE went to tighten the cap, it became stuck and employee tried to jar it loose. While in the process, the cylinder started to tip over and pinched finger between the cylinder and storage cap. Caused laceration to left middle finger requiring 2 stitches.
While picking a lump of coal off the Cleaning Plant picking table, a rock of unknown size collided with Employee's Right Pinky Finger
lifting hose onto flatbed truck, pulled back.
STANDING ON LADDER. WENT TO STEP DOWN FROM THIRD STEP AND FOOT SLIPPED AND SLID DOWN LADDER. DID NOT FALL TO GROUND (STANDING). Pulled neck.
RIGHT KNEE BUMPED THE FIRST STEP OF THE LOADER WHEN CLIMBING UP TO START IT.
Employee was carrying tooth base adapter to back of truck.
Employee got out of truck and slipped and fell on ice.
Stepped out of the Demag bucket that he was welding in and twisted his ankle.
Broken side cutter was removed from demag bucket with welding truck crane. Hook-on cable got welded in point sheave. Welding partner lowered winch causing slack on the reel. Employee yanked on broken piece which came down on his finger because of slack.
Moving a drill steel rod. Rod was on the ground, when being lifted it shifted landing on employee's ankle.
Employee suffered a sudden cardiac arrest secondary to an acute myocardial infarction while seated in the office trailer at this mine. Employee was a security supervisor at this mine. Employee had a past medical history of cardiac illness.
Employee arrived at the mine to find his co-worker in sudden cardiac arrest. Employee attempted resuscitation efforts unsuccessfully. Employee suffered a mental health emergency from this incident.
Employee has discovered apparent bite marks, both red and bumpy in color, similar to that of a mosquito bite. Employee has found these apparent bites on both forearms and on the #4 finger on the left hand.
Employee contacted our emergency on duty manager and presented with speech problems. Employee asked for help to be dispatched. Employee was working second shift security.
Said he was lifting a rock and felt pop in shoulder. Reported to foreman but said he needed no treatment. *On 2/6/13 he reported to foreman he needed to seek treatment for shoulder.*
He pulled pin to remove hook and pulley, block spun back and hit his arm.
EE was backing cat 777 haul truck to rock dump, truck went over dump and slid or rolled approx. 150' to bottom of pit.
Walking by another employee using grinder and dirt and sparks hit him in the face.
Heating and bending round stock with sledge hammer. Woke up next morning with what he thought was tendonitis. Went for x-ray on 5/31/11 and found out hand was fractured.
EE was using a ratchet and pipe to loosen bolt. Ratchet broke and hit his finger between the pipe and ground.
Employee was lifting a grease barrel and felt a strain in abdomen area. He later sought treatment and learned he had a hernia and would need surgery. Scheduled for surgery on 10/23/09. Will be off work after.
Stepped out of storage trailer and twisted ankle.
Dirt blew into eye. Haul truck was dumping along side of dozer. Window of dozer was open and dirt blew into window and went into eye and mouth.
A cutting torch was heating round stock. EE had pipe on end of stock. When he bent the round stock his right hand went under the flame of the torch.
Moving T-4 drill and flipped drill on it's side.
Employee injured himself on 7/13/07 but did not seek treatment. He went to the doctor a few weeks later and has been off work since 09/06/07.
EE was pulling a rock off picking table into a 5' by 3' shaft, which is just below the belt line. The rock hit his penis causing cuts and bruises.