citations per 100 inspection hours
ⓘThis rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 662 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.
Eckley Operation has $9K in proposed MSHA penalties and $0 outstanding across 0 contested dockets.
Penalty disposition
ⓘDifferences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$9K
proposed penalties
$9K
current assessed
$9K
paid to date
$0
outstanding
14 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2026-06-01.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
ⓘShares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
Source: MSHA violations gravity and negligence coding, updated weekly.
MSHA sampling at Eckley Operation shows 99% of 80 respirable coal dust samples met the 1.5 mg/m3 standard.
Health sampling
ⓘA sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.
Respirable coal dust
ⓘRespirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.
Last sampled: 2026-07-27
99%
within 1.5 mg/m3
80
samples
2.25
dust max (mg/m3)
0
over MSHA ECV
ⓘThe excessive concentration value (ECV) is MSHA's own per-sample enforcement threshold, which builds in measurement uncertainty; a sample over its ECV can trigger a citation. The count covers only samples MSHA assigned an ECV.
45 samples taken by MSHA inspectors, 35 by the operator.
Noise
ⓘThe share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.
Health sampling trend
ⓘA sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.
Respirable coal dust by year
ⓘRespirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.
Eckley Operation recorded 8.12 reportable injury cases per 100 full-time workers in 2025.
Injury rate, 2025
ⓘThis rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
8.12
total case rate
4.06
days-away rate
0.000
fatality rate
Above average. The US coal mining average was 3.19 and the all-US-mining average was 1.97 cases per 100 workers.
In Pennsylvania, coal mining averaged 2.63 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year
total case rate
days-away
fatal
2025 *
8.12
4.06
0.000
2024 *
10.26
10.26
0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Source: MSHA controller and operator history, updated weekly.
Workforce and production
ⓘCoal production is reported quarterly and lags the current period; the most recent quarters may be incomplete.
Year
Employees
Coal produced (tons)
2026
26
45,506
2025
25
33,161
2024
20
5,368
2023
8
2018
6
9,266
2017
1
13,825
2016
6
52,548
Source: MSHA quarterly employment and production, updated weekly.
Eckley Operation sits in Luzerne County, Pennsylvania, where the Census mining category is 0.2% of county employment.
Local economic context
ⓘCounty figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Luzerne County, Pennsylvania · Population 325,978
0.2%
Mining share of county employment
$62,321
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
ⓘCitations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Employee was performing routine maintenance on the dragline using hand tools to remove dirt shoot from in front of the drum of the dragline. While lifting the dirt chute up, the employee's finger got pinched between the chute and frame of the upper platform.
Employee was wiping off the torch due to sputtering. Employee turned off the nozzle on the torch before wiping. Metal build up inside the torch released and the torch sparked burning through glove onto employee's hand
October 7, 2024PA · Coalhaul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driverSLIP OR FALL OF PERSON
While the contractor, smucker builders, crew was using a brut post grabber to set the 16th pole of the day for a pole building construction, the 8"x8"x32' pole slipped in the brut pole grabber. It then fell forward knocking down the last pole set, which landed on the brace of the next pole back. the 2x4 wood brace broke and stuck EE in the back of the head as EE moved away.