Email me when a new MSHA incident is filed at Pioneer Aggregates Quarry.
INJ WAS DRIVING3A PIN INTO PLACE WITH A HAMMER. A SMALL S SPLINTER OF STEEL FROM THE PIN EMBEDDED INTO INJUREDS LEG
EMP WAS RAISING3BELLY PAN WITH HYDRAULIC JACK TO A LINE BOLT HOLES WHEN THE JACK SLIPPED AND HIT HIM ON TOP OF THE HEAD
THE OPERATOR WA8 HURRYING INTO THE CONTROL ROOM AND SLIPPED RUNNING HIS ELBOW THROUGH THE WINDOW.
EMPL GETTING OF0 CRANE SLIPPED AND FELL.
SLIPPED AND FEL5 GETING OFF CRANE
CLEARING FEEDER3OF CLAY WITH A PICK-AX WHEN A LODGED STONE FELL AND MASHED HIS HAND.
EMPL RIDING IN 1ICKUP TRUCK WHEN IT RAN OVER ROCK IN THE ROAD.DIDNT SEE DR OR LOSE TIME UNTIL 12-3-86.
EMP WAS WORKING3ON CRUSHER, HE SLIPPED AND FELL AGAINST HIS SHOULDER
AL 3 ALLEGEDLY HURT BACK LIFTING PIPE - NOT REPORTABLE BY EMPLOYEE
EE WAS MOVING D9ILL & WAS NOT WATCHING WHERE HE PUT HIS FOOT. HIS FOOT SLIPPED BETWEEN THE SPROCKET & THE RAIL.
INJURED WAS REM2VING DRILL STEM FROM DRILL. THE STEM SLIPPED AND MASHED MIDDLE & RING FINGERS ON RIGHT HAND.
DRILL STEM WAS 6EING SET ASIDE. EMPLOYEE SAW THAT IT WAS GOING TO FALL, HE REACHED FOR IT AND HURT HIS BACK.
INJURED WAS CLI4BING STEPS TO ENTER TRAILER OFFICE HE SLIPPED & FELL ON THE WET STEPS NOTE AT THE TIME OF INJURY THIS CASE WAS THOUGHT TO BE FIRST AID ONLY ON NOV 17 1986 HIS DOCTOR TOLD HIM N O WORK FOR TWO 4EEKS HE HAS PROBLEM WITH KNEE
EMPLOYEE WAS LEAVING THE ROCK CRUSHER PLATFORM AFTER START UP, HIS H AND SLIPPED AND HE FELL ON THE STAIRS.
I.NAME WAS LEAVING CONTROL TOWER AND HORSING AROUND WITH ANOTHER EMPLOYEE WHEN HE SLIPPED AND HIT A WINDOW
EMP WAS CHANGING BATTERY IN EQUIPMENT - BATTERY SLIPPED EMPLOYEE CAUGHT IT AND HURT BACK IN DOING SO
EMPLOYEE WAS ATTEMPTING TO CLOSE CENTRALIZER WITH HIS LEFT FOOT, WHEN ONE SIDE OF IT PIPPED OPEN STRIKING HIM AT THE BASE OF THE BIG TOE.
I NAME WAS CARRYING 50 LB BAGS OF ANFO FROM ONE END OF THE TRAILER TO ANOTHER. HE SLIPPED AND FELL.
REAR DUMP STALLED ON RAMP WAS REAL SLOSE TO EDGE SO EMPLOYEE JUMPED OFF BREAKING HIS FALL WITH HIS HANDS.
EMPLOYEE AND ANOTHER WERE CARRYING A PIECE OF CATWALK ABOUT 6\ LONG. EMPLOYEE WAS LOOKING BACKWARDS WHEN THE OTHER EMPLOYEE DROPPED HIS END OF THE CATWALK.
HE HAD TO USE PIPE WRENCH TO REMOVE SUB THAT HAD TO BE REPLACED. FINGER OF RIGHT HAND GOT CAUGHT BETWEEN PIPE WRENCH AND FRAME OF DRILL.
WHILE FOREMAN WAS HOLDING CHAIN AND CONNECTING LINK, I.NAME WAS USING A BAR TO SHOVE CONNECTING LINK IN PLACE. HE MISSED THE CHAIN AND HIT SOLID STEEL PLATE, BAR BOUNCED BACK AND SLIPPED OUTOF HIS HANDS AND JAMMED HIS HAND.
CHANGING SHEAR PIN IN THE PRIMARY CRUSHER - EMPLOYEE WAS HOLDING PUNCH WITH HIS HAND AND ANOTHER EMPLOYEE WAS USING THE SLEDGE HAMMER. HE MISSED THE PUNCH AND HIT MICHAEL\S HAND.
EMPLOYEE WAS GETTING WELDING LEAD OFF OF THE NEW CRUSHER BEING ASSEMBLED. HE GRABBED A DOOR PIN THAT WAS NOT WELDED ON AND SLIPPED AND FELL 15 FEET TO THE GROUND.
EMPLOYEE WAS DIRECTING FRONTLOADER IN CLEAN UP WORK. A PIECE OF DRILL STEEL BURIED IN THE DIRT SNAPPED LOOSE AND HIT EMPLOYEE IN LEG.
EMP WAS CLIMBING DOWN FROM LOADER WHEN REACHING THE SECOND RUNG FROM BOTTOM DECIDED TO JUMP TO THE GROUND EMP INJURED FOOT WHEN HE JUMPED TO THE GROUND
EMP WAS CUTTING A BAR OUT OF A DRY SCREEN WHEN HE GOT TOO CLOSE TO WHAT HE WAS CUTTING AND BURNED HIS EYES
INSTALLING V-BELT ON CONVEYOR DRIVE.PULLING ON BELTS,STRAINED CHEST MUSCLES.
EXITING FROM GREASE TRUCK,SLIPPED AND LANDED ON GROUND,CAUSING SPRAIN AND TWISTING OF FOOT.