Mining Incidents

Acosta Mine III: 6 MSHA citations Coal

Godin Bros Inc · Surface
Controlled by Rob Mears; Curt Mears
Jenners, Somerset County, PA  ·  Abandoned
MSHA Mine ID: 3608117

Acosta Mine III has $2K in proposed MSHA penalties and $0 outstanding across 0 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at Acosta Mine III.

Fatalities
0
Total incidents
9
Years on record
1990–2007
Latest incident
Jun 2007
Compliance record
MSHA citations since 2001
6
citations
4
significant & substantial
$1,662
proposed penalties
$1,662
paid to date
100% of proposed penalties paid to date, a $0 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2000
55
inspections on record
554
inspection hours
n/a
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 554 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.

Acosta Mine III has $2K in proposed MSHA penalties and $0 outstanding across 0 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$2K
proposed penalties
$2K
current assessed
$2K
paid to date
$0
outstanding
5 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2007-07-16.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
80.0%
significant & substantial
0.0%
high negligence or reckless
80.0%
reasonably likely or greater
20.0%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 0.0% low, 100.0% moderate, 0.0% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.

MSHA sampling at Acosta Mine III shows 97% of 108 respirable coal dust samples met the 1.5 mg/m3 standard.

Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Respirable coal dust
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.

Last sampled: 2008-04-02, 18 years ago
97%
within 1.5 mg/m3
108
samples
2.01
dust max (mg/m3)
83 samples taken by MSHA inspectors, 25 by the operator.
Most-sampled occupations
  • BULLDOZER OPERATOR32
  • HIGHWALL DRILL OPERATOR22
  • HIGHLIFT OPERATOR/FRONT END LOADER16

Silica (quartz)

Last sampled: 2008-04-08, 18 years ago
12.9
silica avg (%)
12
samples
28.0
silica max (%)
Most-sampled occupations
  • BULLDOZER OPERATOR6
  • HIGHWALL DRILL OPERATOR5
  • OILER/GREASER1

Noise
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.

Last sampled: 2008-04-02, 18 years ago
11%
over PEL
45
samples
Most-sampled occupations
  • BULLDOZER OPERATOR12
  • HIGHLIFT OPERATOR/FRONT END LOADER8
  • CRANE OPER/DRAGLINE OPERATOR6
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.
Health sampling trend
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.
Respirable coal dust by year
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.
Year within 1.5 mg/m3 samples
2008 100% 6
2007 100% 5
2006 100% 11
2005 100% 9
2004 100% 17
2003 100% 12
2002 100% 13
2001 100% 15
2000 85% 20
Silica (quartz) by year
Year silica avg (%) samples
2008 3.8 1
2005 20.3 1
2004 18.5 3
2003 1.4 1
2002 11.2 1
2001 17.0 2
2000 9.5 3
Noise by year
Year over PEL samples
2008 0% 3
2006 0% 3
2005 40% 5
2004 0% 11
2003 0% 6
2002 0% 4
2001 25% 4
2000 22% 9
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.
Ownership history
  1. Godin Bros Inc 1989 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Coal production is reported quarterly and lags the current period; the most recent quarters may be incomplete.
Year Employees Coal produced (tons)
2008 7 10,323
2007 8 47,541
2006 8 68,665
2005 9 60,110
2004 8 76,389
2003 8 88,327
2002 9 81,357
2001 9 90,244
2000 9 89,192
Source: MSHA quarterly employment and production, updated weekly.

Acosta Mine III sits in Somerset County, Pennsylvania, where the Census mining category is 1.6% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Somerset County, Pennsylvania · Population 73,255
1.6%
Mining share of county employment
$59,378
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2008 Q1 4,050 0 0 0.0
2007 Q4 3,832 0 0 0.0
2007 Q3 4,013 2 1 498.4
2007 Q2 3,864 0 0 0.0
2007 Q1 4,427 0 0 0.0
2006 Q4 4,370 0 0 0.0
2006 Q3 4,444 0 0 0.0
2006 Q2 4,087 1 0 244.7
Show 25 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2006 Q1 3,983 0 0 0.0
2005 Q4 3,436 2 2 582.1
2005 Q3 5,074 0 0 0.0
2005 Q2 4,854 0 0 0.0
2005 Q1 4,257 0 0 0.0
2004 Q4 3,791 0 0 0.0
2004 Q3 4,422 0 0 0.0
2004 Q2 4,714 0 0 0.0
2004 Q1 4,017 0 0 0.0
2003 Q4 4,374 0 0 0.0
2003 Q3 4,477 0 0 0.0
2003 Q2 4,043 0 0 0.0
2003 Q1 4,077 0 0 0.0
2002 Q4 4,608 0 0 0.0
2002 Q3 4,085 0 0 0.0
2002 Q2 3,530 0 0 0.0
2002 Q1 3,801 0 0 0.0
2001 Q4 4,477 0 0 0.0
2001 Q3 4,419 1 1 226.3
2001 Q2 4,073 0 0 0.0
2001 Q1 4,382 0 0 0.0
2000 Q4 4,237 0 0 0.0
2000 Q3 4,632 0 0 0.0
2000 Q2 4,747 0 0 0.0
2000 Q1 4,154 0 0 0.0
No fatalities recorded at this mine.

Reportable incidents

9 on file

2007 · 1 incident

June 4, 2007 PA · Coal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman SLIP OR FALL OF PERSON
Godin Bros Inc · Caught in, under or between (Not Elsewhere Classified)

EE was pulling pump hose & slipped on loose ground & caught right front foot between 2 rocks. Strained right foot.

2003 · 1 incident

June 23, 2003 PA · Coal auger helper MACHINERY
Godin Bros Inc · Caught in, under or between a moving and a stationary object

EE'S HAND GOT CAUGHT BETWEEN THE HOIST CABLE AND THE KELLY BAR AND TWO FINGERS WERE SEVERED.

2002 · 1 incident

November 8, 2002 PA · Coal rock driller HANDLING OF MATERIALS
Godin Bros Inc · Over-exertion in lifting objects

EMPLOYEE WAS HELPING THE MECHANIC LIFT AN EMPTY WOODEN CABLE SPOOL WHEN HE HURT HIS BACK.

2001 · 1 incident

October 2, 2001 PA · Coal welder (shop) MACHINERY
Godin Bros Inc · Struck by falling object

WELDER WELDED A HOOK-UP WELD TO A PIECE OF SHEETMETAL FOR LIFTING. WHILE LIFTING THE HOOK-UP BROKE AT THE WELD POINT AND THE SHEET STRUCK THE WELDER ON THE RIGHT FOOT.

1997 · 1 incident

November 19, 1997 PA · Coal greaser, grease man, oiler, lube man, dragline oiler SLIP OR FALL OF PERSON
Godin Bros Inc · Fall to the walkway or working surface

AS THE EMPLOYEE WAS CLIMBING DOWN THE LADDER ON A RUBBER TIRE HIGH-LIFT. HE STEPPED OFF THE LADDER UNTO FROZEN GROUND AND SLIPPED AND SPRAINED HIS LEFT ANKLE.

1995 · 1 incident

September 13, 1995 PA · Coal crane operator, mobile equipment operator (meo), dragline operator, dropball operator, rigger SLIP OR FALL OF PERSON
Godin Bros Inc · Over-exertion (Not Elsewhere Classified)

EE STEPPED OUT OF ENGINE COMPARTMENT, DOWN ONE STEP TO THE INSIDE CATWALK AND TWISTED HIS RIGHT ANKLE.

1994 · 1 incident

March 4, 1994 PA · Coal greaser, grease man, oiler, lube man, dragline oiler SLIP OR FALL OF PERSON
Godin Bros Inc · Fall to lower level, (Not Elsewhere Classified)

ON 3-4-94, EMPLOYEE WAS CLEANING DOZER TRACKS AND FELL INTO THE TRACKS DUE TO ENVIRONMENTAL CONDITIONS. EMPLOYEE REPORTED ACCIDENT TO D GODIN ON3/10/94. EMPLOYEE WENT TO THE DR. ON 3-10-94 AT 7PM. EMPLOYEE'S FIRST DAY OFF WORK WAS 3-11-94.

1993 · 1 incident

June 1, 1993 PA · Coal bulldozer operator, universal operator, heavy equipment operator, operating engineer OTHER
Godin Bros Inc · Bodily reaction, (Not Elsewhere Classified)

EMPLOYEE DID NOT KNOW THAT HIS KNEE WAS INJURED TILL THE MORNING WHEN HE TRIED TO GET OUT OF BED THERE WAS NO WRONG MOVE MADE BY EMPLOYEE THAT HE KNEW OF.

1990 · 1 incident

August 31, 1990 PA · Coal greaser, grease man, oiler, lube man, dragline oiler HANDTOOLS (NONPOWERED)
Godin Bros Inc · Struck by... (Not Elsewhere Classified)

REMOVING HORS SHOE THAT HOLDS BUCKET TOOTH IN PLACE BAR SLIPPED & PUNCTURED I.NAME RIGHT HAND.I.NAME TAKEN TO DR AND RETURNED TO WORK.NO LOST TIME.