Alston Surface/Center Prep has $120 in proposed MSHA penalties and $0 outstanding across 0 contested dockets, plus health sampling and the full incident record.
Email me when a new MSHA incident is filed at Alston Surface/Center Prep.
| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2007 Q4 | 3,246 | 0 | 0 | 0.0 |
| 2007 Q3 | 1,270 | 0 | 0 | 0.0 |
| 2007 Q1 | 60 | 0 | 0 | 0.0 |
| 2006 Q4 | 60 | 0 | 0 | 0.0 |
| 2006 Q3 | 60 | 2 | 0 | 33333.3 |
| 2006 Q2 | 60 | 0 | 0 | 0.0 |
| 2006 Q1 | 60 | 0 | 0 | 0.0 |
| 2005 Q4 | 20 | 0 | 0 | 0.0 |
| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2005 Q3 | 20 | 0 | 0 | 0.0 |
| 2005 Q2 | 20 | 0 | 0 | 0.0 |
| 2004 Q4 | 2,868 | 0 | 0 | 0.0 |
| 2004 Q3 | 4,512 | 0 | 0 | 0.0 |
| 2004 Q2 | 3,012 | 0 | 0 | 0.0 |
| 2003 Q3 | 0 | 0 | 0 |
EMPLOYEE STATED3THAT THE TOP ROLLER ON DOZER TRACK WAS FROZEN AND HE WAS TRYING TO BREAK IT LOOSE BY HITTING IT WITH SLEDGE HAMMER. A PIECE OF METAL CHIPPED OFF THE ROLLER STRIKING HIM IN LOW ER ABDOMEN. 3
EMPLOYEE STATED3THAT HE WAS HOLDING A SMALL HAMMER AND HITTING IT WITH A SLEDGE HAMMER. THE SLEDGE HAMMER GRAZED TRUCK FENDER CAUSING HIM TO STRIKE HIS LEFT HAND.
EMPLOYEE STATED3THAT HE WAS TIGHTENING TRANSMISSION BELTS WHEN WRENCH SLIPPED CAUSING STRAIN TO HIS NECK AND ARM.
EMP STATED THAT3WHILE ADJUSTING THE WATER TURRET NOZZLE AT TRUCK WASH, IT FELLBACKWARD STRIKING HIM ON THE NOSE
EMP STATED HE S9T HIS LUNCHBOX ON THE BENCH IN THE BATHHOUSE WHEN A CLOTHES BASKT FELL AND HIT H IM ON THE FHEAD
EMPLOYEE WAS CL9ANING DOZER TRACKS WITH SHOVEL AND HIT HIS ELBOW ON DOZER.
TWO HAUL TRUCKS3HIT HEAD ON GOING APPROXIMATLY 5 TO 10 MPH THOUGH A FOGGY AREA WITH LOW VISIBLITY.
EMP WAS DISMOUN7ING DRAGLINE WHEN HIS FEET BECAME TANGLED IN DROP CORD HE WAS CARRYING CAUSING HIM TO FALL AND HIT HIS HEAD ON PIECE OF METAL
EMPLOYEE JUMPED3OUT OF 100 T CRANE LANDED ON ICE AND STRAINED BACK
EMPLOYEE WAS PU5LING ON ROPE TIED TO PUMP HOSE ROPE CAME LOOSE EMPLOYEE FELL IN MUD TWISTING BOTH KNEES.
EE WAS DRIVING PICKUP TRUCK ON HAULROAD & RAN INTO THE BACK OF A END DUMP TRUCK THAT WAS STOPPED ON THE HAULROAD.
EE WAS CLIMBING UP ONTO THE ENDLOADER & ANOTHER EE PULLED RADIATOR CAP OFF & HOT COOLANT SPEWED ON HIM.
BENT OVER TO PICK UP WRENCH-STRAINED BACK.
EMP WAS LETTING D9 DOWN ON TO THE TRACKS AFTER REPAIR AND A CRIBBING BLOCK STRUCK HIM ON THE LEG
EMPLOYEE WAS STANDING NEAR SLEDGE HAMMERING OPERATION METAL CAME OFF SPIKE MAUL AND LACERATED LEFT UPPER ARM.
EMPLOYEE WAS HELPING PRESS BRASS INTO 5761 CRAWLER USING HYDRAULIC RAM A ROD BROKE & STRUCK HIM ON THE RT HAND
LIFTING ON A TRUCK TIRE PULLED GROIN - HERNIA
EMPLOYEE STATED HE WAS SQUIRTING FUEL ON HAUL TRUCK DOORS TO HEAT & THAW FUEL FLASHED BACK AND BURNED HIS NECK AND FACE.
EMP STATED HE WAS USING A TILE SPADE TH SHOVEL OUT TRACKS ON HIS D9 DOZER THE TILE SPADE BROKE THROUGH THE MUD EASIER THAN HE EXPECTED CUAING HIM TO JERK FORWARD STRAINING HIS LOWER BACK
EMPL INSTALLING CAB GLASS ON DOZER AND LACERATED HAND.
EMPL SLIPPED DISMOUNTING PAN
PRYING GRADER DOOR OPEN WITH THUMB AND STRAINED THUMB.
HE PICKED UP FILE CABINET AND FELT PAIN IN GROIN AREA.
EMPLOYEE WAS OPERATING D-8 DOZER AND WHEN HE PULLED CUTTING CLUTCH HE FELT PAIN IN BACK
EMP STATED BRAKES ON PRESS TRUCK HAD FAILED TO HOLD TRUCK, DUE TO EXTENDED USE & RESSURE LOSS, A SMALL CASE TRACTOR DOZER WAS PUT BEHIND THE TRUCK TO HOLD IT & LET IT DOWN THE INCLINE THE TRAC TOR LET THE TRUCK GET GOING FASTER THAN THE OPERATOR DESIRED, TRUCK OPERATOR JUMPED FROM TRUCK CAB & SPRAINED HIS LEFT ANKLE
EMPLOYEE WAS OPERATING D-8 DOZER CLIMBING OVER A MOUND OF DIRT. THE DOZER CAME OUT OF GEAR ALLOWING DOZER TO ROLL BACKWARD AND HIT A ROCK, JOLTING THE OPERATOR.
EMPLOYEE WAS STANDING ON LOWER DOOR EDGE WITH ONE FOOT HAD OTHER FOOT ON PEG WELDED TO WALL, FOOT SLIPPD OFF PEG, CAUSING EMPLOYEE TO SLIP, STRAINING HIS LOWER BACK
CLERK WAS CARRYING TIME SHEETS FROM 2ND FLOOR TO 1 ST FLOOR OF MAIN OFFICE SHE MISJUDGED THE STEPS AND FOOT SLIPPED CAUSING HER TO FALL ON BACK & ARMS.
EMPLOYEE STATED, HE LIFTED PAN ENGINE HEAD, APPROX. 100 LBS., FROM BACK OF TRUCK AND PLACED IT ON TOP OF 55 GAL. DRUM IN DOING THIS HE STATES THAT HE STRAINED HIS LOWER BACK. EMPLOYEE REPORTED INJURY ON 10-13-84.
EMPL ON HAULTRUCK INSTALLING RADIATOR HOSE.TRUCK WET FROM SPILLED ANTI-FREEZE EMPL SLIPPED DWHILDISMOUNTING FELL TO GROUND SPRAINED LEFT ANKLE.
EMP STATED HE WAS CARRYING HIS TOOL TRAY TO HIS WORK AREA THE TRAY WEIGHTS APPROX 65 LBS HE TURNED TO PUT TRAY ON A PEDISTAL AS HE TURNED HE STATES HE STRAINED HIS LOWER BACK
EMPLOYEE WAS WATCHING ANOTHER EMPLOYEE DRILL A HOLE IN A PIECE OF METAL WITH A D RILL PRESS, A SHAVING CURLED UP FROM THE DRILL BIT, EMPLOYEE WAS GOING TO PULL THE SHAVING AWAY, WHEN HE GOT HO LD OF SHAVING IT LACERTED HIS LEFT INDEX FINGER
EMPLOYEE STATED, HE WAS USING A PRY BAR TO TIGHTEN A NUT ON THE BOTTOM OF THE VERTICAL SHAFT ON THE 170-B LOADER, THE BAR SLIPPED OFF THE NUT, STRUCK EMPLOYEE IN MOUTH, LACERATING UPPER LIP.
EMP STATED THAT THE EQUALIZING SHEAVE WAS SWINGING DOWN, HE THOUGHT THE EQUALIZING CABLE WAS BROKEN WHEN HE GRABBED CABLE TO CHECK IT, SHEAVE CAME UP STRIKING HIM ON FOREARM AND ACROSS NOSE
EMP STATED HE WAS ATTEMPTING TO LIFT A PIECE OF 2 IN ALL THREAD ROD THAT CONTAINED A 6IN DIAMETER AND A 10 IN DIAMETER STEEL PLATE AND A 100 TON HYDRAULIC JACK RAM IN DOING THIS HE STRAINED HIS RT SIDE
EE WAS CUTTING PUMP HOSE WITH POCKET KNIFE & PUNCTURED HIS RIGHT LEG ABOVE THE KNEE.
EMPLOYEE STATED, HE WAS PUSHING SHEAVE TO ROLL WINCH LINE BACK INTO SHEAVE, THE CABLE ROLLED OVER HIS RIGHT THUMB CATCHING IT BETWEEN THE CABLE & THE SHEAVE.
EMPLOYEE HAD JUST FINISHED WASHING #208 EUCLID HAULTRUCK AS HE WAS STEPPING OFF WET TRUCK HIS FOOT SLIPPED OUT FROM UNDER HIM HE MAINTAINED HIS GRIP ON THE HAND RAIL & SWUNG AROUND AND HIT HIS RIGHT SIDE AGAINST THE BATTERY BOX
THE HAULROAD HAD BEEN WATERED EMPLOYEE STATED THAT SHE HIT A SLICK SPOT IN THE ROAD, CAUSING TRUCK TO JACK-KNIFE, THE SUDDEN STOP CAUSED HER TO STRIKE HER LEFT KNEE AGAINST WINDOW REULATOR BA SE.
EE STATED HE WAS CHECKING TOP MOUNT ROOF AIR CONDITIONER ON TOP OF FA-31 DOZER. HE HAD LEANED OVER A/C TO CHECK GAS FLOW IN SIGHT GLASS, WHEN HE LEANED OVER HIS LEFT HAND TURNED, ALLOWING HIS LITTLE FINGER OF LEFT HAND TO CONTACT FAN BLADE, RESULTING IN LACERATIONS.
EMPLOYEE WAS REMOVING CRAWD BRAKE ASSEMBLY ON 5761 SHOVEL. BARAKE SHOE WAS WEDGED AGAINST MOUNTING FRAME, WHEN EMPLOYEE PULLED ON SHOE IT CAME FREE AND PIVOTED CATCHING LEFT RING FINGER AT FIR ST JOINT BETWEEN BRAKE SHOE AND BRAKE ARM.
EMPLOYEE STATED THAT HE WAS UNLOADING 120 POUND GREASE DRUMS FROM SUPPLY TRUCK AND A DRUM FELL ON HIS LEFT FOOT
EMPLOYEE WAS REMOVING BELLY PAN ON WABCO SCRAPER REMOVED THE LAST BOLT AND PAN WAS TOO HEAVY FOR HIM TO HOLD STRAINED HIS ARM.
EMPLOYEE STATED HE WAS REMOVING HEAD GASKET SHIM ON D-9 DOZER METAL SHIM BROKE SLIPPED THROUGH HAND AND LACERATED FINGER ON LEFT HAND.
EMPLOYEE STATED HE WAS INSTALLING A VALVE BODY ON A PAN VALVE BODY SLIPPED AND CAUGHT FINGER UNDERVALVE BODY.
EE SAID HE WAS MOUNTING 5761 SHOVEL WHEN A ROCK CAME OFF THE HIGHWALL & ROLLED UNDER THE MACHINE & STRUCK HIM ON THE RIGHT SIDE OF THE BODY.
EMPLOYEE STATED HE WAS DRIVING IN A BEARING RACE ON THE 7400 DRAGLINE SWING MOTOR RACE POPPED OUT AND HIT HIM IN THE HAND.
EMPLOYEE STATED HE WAS USING POCKET KNIFE TO CUT TAPE ON ELECTRICAL MILLER CONNECTION TAPE WAS FROZEN AND KNIFE SLIPPED LACERATING THUMB AND MIDDLE FINGER ON RT HAND
EE STATED HE WAS REMOVING NUTS FROM 9570 DRAGLINE COUNTER WEIGHT TO REMOVE COUNTER WEIGHT, WHEN NUTS WERE REMOVED, THE RETAINER CHIPS BROKE ALLOWING THE COUNTER WEIGHT TO FALL BACK AGAINST THE EE.
A dated report covering the 26-year penalty trail, line-item violation pattern, contest and docket posture, rate-normalized peer benchmark, and full fatality history. Delivered as a PDF with the underlying data as CSV.