Eagle No. 2 Coal

EMP WAS CHECKING WIPER MOTOR ON D8L DOZER TO DETERMINE IF MOTOR SHAFT WAS TURNING. STUCK HIS FINGER BETWEEN SHAFT AND WIPER BLADE AND CAUGHT LEFT RING FINGER BETWEEN SHAFT AND WIPER ARM.

REMOVING ROOF FROM METAL BUILDINGS. FOOT SLIPPED FELL TO THE FLOOR.

A COUNTER WEIGHT BECAME STUCK DURING THE PROCESS OF REMOVING IT FROM A 988B FRONT END LOADER A CABLE SLING WAS BEING USED TO SUPPORT THE WEIGHT WHEN THE WEIGHT CAME LOOSE IT SWUNG FREE & THE L ADDER ATTACHED TO THE WEIGHT CAUGHT EE IN THE LEFT SHOULDER BREAKING HIS COLLAR BONE & CAUSING A LACERATION ON THE LEFT SIDE OF THE HEAD EE WAS TREATED AT HARRISBURG MEDICAL CENTER & WAS KEPT

ROOF FALL, MAIN NORTH TRACK ENTRY, 3 CROSSCUTS INBY LOCATION WHERE 1ST MAIN ANGLE BELT CROSSES MINE TRACK. APPROX. 40' LONG 18' WIDE 10'-12' HIGH.

ROOF FALL, INT HE SOUTH PANEL NO. 5 ENTYRA T CROSSCUT NO. 24. APPROX 20'LX16'WX7'-8'HIGH.

ROOF FALL, 6TH SOUTH PANEL- TRACK ENTRY AT CROSSCUT NO. 24. APPROX. 20' LONG 30' WIDE 10'-12' HIGH. MINE TRACK COVERED UP.

VICTIM STATED HE WAS HOLDING OPEN A WOODEN AIR DOOR AS SCOOP WAS PASSING THRU, BUCKET OF SCOOP BUMPED DOOR. DOOR RAISED RESULTING IN VICTIM'S HAND BEING CAUGHT BETWEEN DOOR AND MINE ROOF.

ROOF FALL 1ST MAIN NORTH ANGLE TRACK ENTRY X-CUT NO.16 APPROX. 20' LONG 30' WIDE 8' HIGH.

EE WAS ASSISGNED TO CLEAN UP AND STRAINED HIS LOWER BACK DISPOSING OF TRASH.

ROOF FALL 6TH SOUTH PANEL #5 ENTRY @ CROSS CUT #13. APPROX 20' LONG 60' WIDE 7'-8' HIGH.

EMPLOYEE STATES THAT WHILE ATTEMPTING TO PUSH CAT PADS OF MINER OVER WITH FEET HE PULLED ON RAIL ON SIDE OF MACHINE. THE RAIL DROPPED ON RIGHT SHIN CAUSING LACERATION. THE DISASSEMBLED MINER W AS ON THE SURFACE AND BEING LOADED FOR TRANSPORT

ROOF FALL 2ND ;MAIN WEST ENTRIES IN THE BELT ENTRY AT CROSSCUT NO. 30 APPROX. 20 -25 LONG 18FT WIDE 10 TO 12 FT HIGH.

ROOF FALL, MAIN NORTH TRACK ENTRY, IST ANGLE SECTION OF TRACK, 1 X-CUT INBY WHERE 1ST ANGLE BELT CROSSES MINE TRACK. APPROX 16' LONG 16' WIDE, 4' HIGH.

ROOF FALL, 6TH SOUTH PANEL, ROOM NO.47 BEGINNING AT THE 60' LOCATION. APPROX. 80' LONG 20' WIDE, 8' THICK

ROOF FALL 6TH SOUTH PANEL(NO. 1 UNIT) NO.6 ENTRYAT CROSSCUT NO. 13 APPROX 22' LONG 18' WIDE 6' THICK.

ROOF FALL 5TH SOUTH PANEL, 1ST CROSSCUT OF OLD RETURN ROOMS AT SPAD 13 & 00: APPROX 20' LONG 20' WIDE 7' TO 8' THICK.

EMPLOYEE WAS CHANGING A FLAT TIRE ON THE SECURITY VEHICLE AND STRAINED HIS LOWER BACK.

ROOF FALL 6TH SOUTH PANEL BELT ENTRY AT SPAD 13 & 20 APPROX. 45'LONG 18' WIDE 8'HIGH.

ROOF FALL - NO. 7 ENTRY OF MAIN NORTH HEADINGS WHERE THEY CUT INTO THE 3RD M. NORTH ENTRIES.

ROOF FALL - X CUT NO 10 OF TRACK ENTRY OF THE 3RD MAIN EAST ENTRIES. APPROX. 25' LONG 30' WIDE 6' - 8' HIGH.

EMPLOYEE STATED HE WAS CHANGING FLAT TIRE ON SHUTTLE CAR, HE WAS SITTING BESIDE CAR PUSHING NEW TIRE ON AND WRENCHED HIS RIGHT KNEE.

A ROOF FALL OCCURRED ON 7-11-93 AT 10:30 PM ON THE 1ST SOUTH PANEL AT X-CUT NO. 29. WIDTH 35'XLENGTH 20'X HEIGHT 6'.

EE STATED HE WAS CLEANING FRAME OF HOIST, SLIPPED OFF FRAME CAUSING PAIN TO LEFT KNEE.

EMPLOYEE STAT ED HE BUMPED HIS KNEE AS HE DISMOUNTED FROM PLATFORM OF DRIVE CHAIN ON #1 RAW COAL BELT NOTE MISSED ONE DAY 07-12-93

EMPLOYEE STATED WHEN DRIVING SHUTTLE CAR ALONG HAUL ROAD HE HIT A ROUGH AREA CAUSING HIM TO BE THROWN UP OUT OF SEAT & HE LANDED ON THE EDGE OF SEAT WITH LOWER BACK STRIKING EDGE OF SEAT.

EMPLOYEE STATED PAIN WAS FLET TO HIS LOWER BACK WHEN PULLING DAMAGED BELT STRUTURE FROM UNDER CAONVEYOR BELT.

EMPLOYEE STATED WHEN UNLOADING MINER FLEX SIDE FROM SUPPLY CAR TO TOP OF SCOOP, HIS FINGER WAS CAUGHT UNDER THE FLEX SIDE WHEN PLACING IT ONTOP OF SCOOP.

EMPLOYEE STATED WHEN HE AND ANOTHER MAN WERE LIFTING A PIECE OF DRAW ROCK FROM THE TOP OF A ROOF BOLTER, HE ALLEGEDLY STRAINED HIS RIB CAGE AREA.

EMPLOYEE WAS HAN ROCK DUSTING, SLINGING ROCK DUST, STATED HE TWISTED HI LOWER BACK.

EMPLOYEE STATED HE WAS DRIVING SHUTTLE CAR, RAN OVER BUMP IN HAULAGE ROAD CAUSING PAIN TO HIS LOWER BACK.

EMPLOYEE WAS CAUGHT IN AIR LOCK DOOR BETWEE DOOR & FRAME CAUSING HEAD & NECK PAIN.

OPERATING ROOF BOLTER MACHINE INSTALLING ROOF BOLT PRESSED BOLT WITH HEADER BOARD ATTACHED TO ROOF BOLT AGAINST MINE ROOF CAUGHT MIDDLE & FOURTH FINGERS RIGHT HAND BETWEEN BOARD & ROOF FRACTUR ED TIPS FINGERS.

EMPLOYEE STATED SHE WAS RECOVERING KENNEDY STOPPINGS, STEPPED IN HOLE IN MINE FLOOR, TWISTED LEFT ANKLE.

THE PERSONNEL ELEVATOR WAS OUT OF OPERATION FROM 4:47 AM UNTIL 6:50 AM, DUE TO LOCAL POWER COMPANY FAILURE.

EMPLOYEE STATED HE WAS SHOVELING SAND WHEN HE EXPIERENCED PAIN IN HIS LOWER BACK.

EMPLOYEE STATED A PALLET BLOCK DROPPED OFF END OF CRIB, END OF CRIB CAME UP AND CAUGHT HIS RIGHT INDEX FINGER BETWEEN PALLET BLOCK AND END OF CRIB, CAUSING LACERATION REQUIRING 19 STITCHES.

EMPLOYEE STATED HE WAS LIFTING SCOOP BATTERY COVER (LID) WHEN HE FELT PAIN IN HIS BACK.

EE STATED HE BENT OVER TO GO THRU A MAN DOOR IN A STOPPING RAISED UP AND FELT BACK PAIN.

EMPLOYEE WAS LIFTING A 5 GALLON BUCKET GREASE OUT OF A MANTRIP FELT PAIN IN LOWER BACK. STARTED MISSING WORK ON 6/14/93.

EE STATED HE STEPPED FROM ONE LEVEL TO ANOTHER WHEN HE FELL CUTTING RING FINGER STRAINING BACK AND NECK.

EMPLOYEE WAS OPERATING ROOF BOLTER MACHINE, A ROCK FELL FROM THE MINE ROOF, STRUCK EMPLOYEE ON HIS LEFT FOOT, CAUSING A BRUISE.

EMPLOYEE STATED HE WAS WALKING U/G FROM MANTRIP STATION TO ELEVATOR, STRUCK HIS HEAD AGAINST LIGHT FIXTURE HANGING FROM THE MINE ROOF, CAUSING PAIN TO EMPLOYEE'S LOWER BACK.

EMPLOYEE WAS LOADING ROOF BOLTS ONTO THE ROOF BOLTER MACHINE WHEN HE FELT PAIN IN RECTAL AREA.

EMPLOYEE STATED HE WAS LOADING ROOF BOLTER TRAY WITH RESIN GLUE, PIECE OF ROCK FELL FROM ROOF, STRUCK EMPLOYEE ON HIS UPPER BACK CAUSING BACK PAIN.

ROOF FALL N0. 5 UNITS INTAKE AIR COURSE AT SPAD 19 & 00. 1ST NORTH PANEL APPROX 40 FT LONG 18 FTWIDE 5FT TO 6FT THICK.

EMPLOYEE STATED HE PICKED UP FIRE EXTINGUISHER TO PUT ON MANTRIP, FELT PAIN IN LOWER BACK.

EMPLOYEE WAS USING A PRY BAR TO REMOVE A DAMAGEDBELT ROLLER, PRY BAR SLIPPED CAUSING PAIN TO EMPLOYEE LEFT SHOULDER.

EMPLOYEE CALLED MINE & STATED THAT AFTER WORK SHIFT HE ATTEMPTED TO PURCHASE A SODA POP FROM SODA MACHINE. WHEN SODA DID NOT DISCHARGE HE BECAME ANGRY & SHOOK MACHINE CAUSING FOOT TO SLIP UND ER & MACHINE DROPPED ONTO TOES OF FOOT CAUSING FRACTURE TO TOE.

INJURED WAS WALKING DOWN LW2 FACE AND HIT HIS HEAD ON 4 SHIELD.

EE WAS WALKING UG STRUCK HIS HEAD AGAINST AN OVER HEAD HEADER BOARD CAUSING BACK PAIN.

EMPLOYEE STATED HE WAS OPERATING ROOF BOLTER, DRILLING BOLT HOLE. PIECE OF ROCK FELL FROM ROOF, STRUCK HEAD OF RIB, SLID OFF AND STRUCK EMPLOYEE ON RIGHT KNEE CAUSING A BRUISE.

EMPLOYEE WAS WALKING FROM BOTTOM ELEVATOR TO DIESEL 3 WHEELER STATION, STEPPED ON LUMP OF COAL, TWISTED RIGHT KNEE

EMPLOYEE WAS COME-A-LONGING BELT BACK TOGETHER, PULLING ON HANDLE OF COME-A-LONG, FELT SHARP PAIN AND NUMBNESS IN LOWER BACK.

EE STATED HE WAS OPERATING SHUTTLE CAR ON WAY TO FEEDER RAN OVER A ROCK IN HAULAGE ROAD BUMPED HEAD AGAINST CANOPY CAUSING PAIN TO BACK.

EMPLOYEE WAS WALKIN GIN FRONT OF RATION FEEDER, STEPPED IN LOOSE COAL AND TWISTED HIS RIGHT KNEE.

EMPLOYEE WAS BUILDING A CONCRETE STOPPING, LIFTING CONCRETE BLOCKS, FELT PAIN IN LOWER BACK.

EMPLOYEE WAS OPERATING THE CONTINUOUS MINER. A PIECE OF ROCK FELL FROM THE ROOF STRUCK EMPLOYEE ON TOP OF HIS HEAD CAUSING PAIN TO NECK AND LOWER BACK.

EMPLOYEE WAS OPER ATING SHUTTLE CAR TURNED IN DECK TO GO OPPOSITE WAY CAUGHT METATARSAL GUARD ON SHOE BETWEEN BRAKE PEDAL& SEAT CAUSING EMPLOYEE TO TWIST HIS LEFT KNEE

EMPLOYEE WAS OPERATING THE CONTINUOUS MINER A PIECE OF ROCK FELL FROM ROOF STRUCK EMPLOYEE ON TOP OF LEFT SHOULDER KNEE ALSO RT HIP

EE WAS USING A UTILITY KNIFE TO CUT A 14/3 ELECTRICAL CABLE KNIFE SLIPPED CUT EE UPPER RIGHT LEG REQUIRING FIVE STITCHES.

EMPLOYEE WAS REMOVING ROOF BOLTER CABLE FROM TIE WIRE OPERATOR TURN ON CABLE REEL CABLE CAUGHT EMPLOYEE AROUND LEG FLIPPING EMPLOYEE IN AIR CAUSING PAIN TO ENTIRE LEFT SIDE OF BODY

EMPLOYEE STATED WHEN WALKING ALONG TRACK ENTRY, STEPPED ON A ROCK TWISTING HIS RIGHT KNEE.

EMPLOYEE WAS LIFTING SCOOP TIRES ONTO FLAT CAR, SAID HE FELT PAIN IN HIS LOWER BACK.

EMPLOYEE WAS PULLING ON THE CONTINUOUS MINER CABLE WHEN HE FELT PAIN IN HIS LOWER BACK.

EMPLOYEE WAS PULLING T HE CONTINUOUS MINER CABLE OUT OF THE HAULAGE ROAD TOWARD THE RIB TURNED & TWISTED RT KNEE

EMPLOYEE WAS STEPPING OUT OF MANTRIP, TURNED AND TWISTED HIS LEFT KNEE.

EMPLOYEE STATED HE WAS WALKING UNDERGROUND, STRUCK HIS BACK AGAINST A HEADER BOARD CAUSING PAIN TO HIS LOWER BACK.

EMPLOYEE WAS UNLOADING SUPPLIES OUT OF SCOOP BUCKET, STEPPED INTO SCOOP BUCKET, FOOT SLIPPED CAUSING EMPLOYEE TO TWIST HIS RIGHT KNEE.

EE WAS OPERATING OPEN TYPE MANTRIP STRUCK HIS HEAD AGAINST HEADER BOARD CAUSING BACK PAIN STARTED MISSING WORK ON 4-29-93.

A ROOF FALL OCCURRED ON THE FIRST ANGLE TRACK ENTRY AT CROSS-CUT NO.43, HEIGHT 8 FEET, X 30 FEET LENGTH X 25 FEET WIDTH.

EMPLOYEE SSTATED HE WAS SUPERVISING ALIGHNING A SECTION OF CRIB CONVEYOR BOTTOM WHEN IT SLIPPED STRIKING HIS RT WRIST

A ROOF FALL OCCURRED ON THE 2ND MAIN WEST BELT LINE, AT X-CUT NO. 36, LENGTH 25' X WIDTH 25' X 10 TO 12'.

EMPLOYEE STATED STRAINED LOWER BACK LIFTING 16' LADDER TO TAKE DOWN LIGHT (LAST DAY WORKED 4/2/93)(ORIGINAL MEDICAL ONLY)

EE STATED HE APPARENTLY STRAINED HIS LEFT KNEE WHILE CLIMBING REPAIRING UNDER TAMPER.

EMPL STATED WALKING UNDERGROUND, STRUCK EMPLS HEAD AGAINST A ROOF BOLT HEADER BOARD CAUSING PAIN IN EMPLS. NECK.

A ROOF FALL OCCURRED ON THE 4TH SOUTH PANEL OFF THE NORTH WEST SUBMAIN AT CROSS CUT NO. 20 (OUTBY NO. 3 UNIT) IN THE TRACK ENTRY. LENGTH 22 FEET X 19 1/2 FEET WIDE X 6 FEET HIGH. FALL OCCURR ED SOME TIME ON SECOND SHIFT, FOUND ON 3RD SHIFT.

A ROOF FALL OCCURRED ON THE 6TH SOUTH PANEL IN THE TRACK ENTRY AT CROSS CUT NO.25, SPAD NO 13 AND 20, WIDTH 30 FEET X LENGTH 20 FEET X HEIGHT 7 FEET.

A ROOF FALL OCCURRED ON THE NO. 1 UNITS TRACK AT X-CUT NO. 12, SPAD NO. 5+40, WIDTH 20' X LENGTH 25' X HEIGHT 6'.

A ROOF FALL OCCURRE DON THE NO. 1 UNIT INT EH NO. 3 ENTRY, FOUR CROSS CUTS OUTBY FACE OF COAL. HEIGHT 6 FEET WIDTH 20 FEET X LENGTH 23 FEET.

EE STATED HE WAS USING A PRY BAR TO RAISE A SPEED REDUCER THE PRY BAR SLIPPED OFF SPEED REDUCER CAUSING EE TO FALL FORWARD FELT PAIN IN HIS LOWER BACK.

A ROOF FALL OCURRED ON MM4 001-0 NO 1 UNIT LENGTH 30FTXWIDTH 20FTXHEIGHT 8 FT IN NO 3 ENTRY AT SPAD NO 13+20

EMPLOYEE STATED HE TWISTED HIS LEFT KNEE WHEN HE TURNED TO PUT THE TROLLEY POLE BACK ONTO THE TROLLEY WIRE.

EE WAS WALKING UNDERGROUND, STRUCK HIS HEAD AGAINST A HEADER BOARD, CAUSING PAIN TO HIS NECK.

EMPLOYEE WAS HANGING THE CONTINUOUS MINER CABLE AND EXPERIENCED PAIN TO HIS LUMBAR SECTION OF BACK. CONTINUED TO EXPERIENCE PAIN TO AREA, BEGAN LOOSING TIME FROM WORKS ON 6-15-93, BECAME REPOR TABLE ON 6-15-93.

EE STATED HE WAS MOVING SHUTTLE CAR TIRE WHEN HE FELT PAIN IN HIS LOWER BACK.

EE STATED HE WAS DRILLING LUG STUD BOLTS OUT OF SCOOP WHEEL APPLYING PRESSURE WITH HIS SHOULDERS FELT PAIN IN BOTH SHOULDERS.

EMPLOYEE STATES SHE WAS WALKING AROUND BELT DRIVE, TRIPPED OVER A FIRE OUTLET AND FELL FACE FORWARD, CAUSING PAIN TO HER LEFT KNEE & HAND.

EMPLOYEE STATED AS HE WAS WALKING FROM THE ELVATOR SHAFT TO THE MANTRIP HE FELT PAIN IN HIS LEFT SIDE.

A ROOF FALL OCCURRED ON THE 7 TH SOUTH PANEL LENGTH 30XW 20X H 6 FT AT SPAD NO. 1 &80 IN THE NO. 3.

ROOF FALL 1ST N.E. SUBMAIN ENTRIES, NO.8 ENTRY AT CROSSCUT NO.17 APPROX. 25' LONG 20' WIDE 7'-8' HIGH.

EMPLOYEE STATED HE WAS WALKING DOWN BELT LINE PIECE OF ROCK FELL FROM ROOF STRUCK EMPLOYEE ON HIS RIGHT SHOULDER CAUSING A BURISE.

EMPLOYEE STATED HE WAS CLEANING BELT HAD TO GO THRU AIR LOCK DOOR HAD PAIN IN HIS LOWER BACK AS HE BENT DOWN TO PASS THRU AIR LOCK DOOR.

EE STATED HE EXPERIENCED PAIN IN LOWER BACK WHILE LAYING UNDER TAMPER REPLACING DRIVE CHAIN LAST DAY WORKED WAS 12-22-92.

EMPLOYEE STATED HE WAS HOLDING BOX END WRENCH TRYING TO LOOSEN TIGHT BOLT AND NOT KNOWN TO HIM ANOTHE EMPLOYEE SWUNG BALL PEEN HAMMER TO HIT WRENCH STRIKING MIDDLE FINGER RIGHT HAND.

EE STATED HE WAS PULLING ON A PIECE OF STEEL HUNG IN THE SHUTTLE CAR CABLE REEL COVER WHEN HE FELT PAIN IN HIS BACK.

ROOF FALL, 5TH SOUTH PANEL, NO.6 ENTRY AT SPAD 17 & 10 APPROX. 18' LONG 80' WIDE 6'-7' HIGH.

ROOF FALL 7TH SOUTH PANEL NO.1 UNIT NO.1 ENTRY AT SPAD 7+80 APPROX. 20' LONG 18' WIDE 5'-6'- HIGH.

EMPLOYEE STATED HE WAS OPERATING THE ROOF BOLTER DRILLING ROOF BOLT HOLE PIECE OF SHARP DRAW ROCK FELL FROM ROOF STRUCK EMPLOYEE ON HIS RIGHT WRIST CAUSING A LACERATION REQUIRING FIVE STITCHES

ROOF FALL, 1ST EAST PANEL, NO.2 UNIT NO.2 ENTRY AT SPAD NO.18 +40. APPROX. 25' LONG 12' WIDE 5'-6' HIGH.

EMPLOYEE WAS DISMOUNTING MANTRIP STEPPED DOWN & TWISTED HIS RIGHT KNEE.

A ROOF FALL OCCURRED ON THE NO.5 UNTI MMU 005-0 AT 615 PM IN THE CROSS CUT BETWEEN NO.2 ENTRY EXTENDING INTO THE NO. 3 ENTRY LENGTH 25 FT X WIDTH 15 FT X HEIGHT 7 1/2 FT.

EMPLOYEE STATED HE WAS WALKING UNDERGROUND, STEPPED ON ROCK, TWISTED HIS RIGHT KNEE.

A ROOF FALL OCCURRED ON THE NO. 1 UNIT (001-0 MMU) AT SPAD NO. 6+50 IN THE NO. 3 ENTRY FOUR CROSSCUTS OUTBY THE FACE OF COAL. APPROX. 25' LONG X 18' WIDE X 6' HIGH.

EMPLOYEE STATED HE WAS KNEELING DOWN MARKING UP HIS PROJECTION MAP OF THE NO. 3 UNIT WHEN HE WAS STRUCK IN THE BACK BY THE S&S SCCOP HAULING LOOSE MATERIAL. EMPLOYEE WAS ROLLED BY THE SCOOP BU CKET APPROX. 4 FEET CAUSING MULTI-CONTUSIONS AND ABRASIONS TO ARMS AND HIP.

EE STATED HE WAS WALKING UNDERGROUND STEPPED INTO A DIP OR HOLE TWISTED HIS RIGHT KNEE CAUSING A POSSIBLE STRAIN.

A ROOF FALL OCCURRED ON THE 6TH SOUTH PANEL IN THE NOI1 CROSSCUT IN THE NO3 ENTRY (BELT ENTRY) LENGTH 35FTXWIDTH20FTXHEIGHT 6FT

A ROOF FALL OCCURRED ON THE NO. 1 UNITS TRACK ENTRY AT SPAD NO. 4+80, 3 X-CUTS OUTBY THE NO. 1 UNITS POWER CENTER. LENGTH 25' X 20' WIDE X 6' HIGH.

EMPLOYEE WAS OPERATING A SUPPLY MOTOR. A PIECE OF DEBRIS FELL FROM THE MINE ROOF, STRUCK EMPLOYEE IN THE LEFT EYE CAUSING IRRITATION, EMPLOYEE WAS WEARING SAFETY GLASSES.

ROOF FALL 7TH SOUTH PANEL #1 UNIT 2ND X-CUT OUTBY THE FACE 18FT LONG 16FT WIDE 5FT HIGH

ROOF FALL 1ST NW SUBMAIN ENTRIEE NO 4 ENTRY 60FT INBY SPAD NO 77+30 APPROX 160FT LONG 18FT WIDE 6FT-7FT HIGH

EMPLOYEE STATED HE WAS SHOVELING AROUND 2ND WEST BELT DRIVE. PIECE OF ROCK FELL FROM THE MINE ROOF, STRUCK EMPLOYEE'S ARMS, BACK AND LEG, TWISTED HIS KNEE WHILE TRYING TO RUN FROM FALLING ROCK .

ROOF FALL 6TH SOUTH PANEL #4 ENTRY AT CROSSCUT NO 25 APPROX 25FT LONG 18FT WIDE 6FT-7TH HIGH

ROOF FALL, 3RD M. EAST ENTRIES, TRACK ENTRY AT CROSSCUT NO.8. APPROX. 30' LONG 20' WIDE 7'-8' HIGH.

EMPLOYEE WAS OPERATING A DOUBLE BOOM FLETCHE ROOF BOLTER, DRILLING A ROOF BOLT HOLE, ROCK FELL FROM ROOF, STRUCK THE DRILL STEEL THROWING A PIECE OF THIN SHARP ROCK INTO THE EMPLOYEE'S RIGTH S ID EFACE CAUSING A LACERATION. REQUIRED FIVE STITCHES.

A ROOF FALL OCCURRED ON THE NO. 5 UNIT (MMU 005-0) AT SPAD NO. 12+90 IN THE NO. 3 ENTRY- 3 CROSSCUT OUTBY THE FACE OF COAL. LENGTH 30' X WIDTH 20' X HEIGHT 5'.

EMPLOYEE STATED HE WAS TRAMMING SHUTTLE CAR. A PIECE OF COAL ROLLED OFF THE RIB AND STRUCK EMPLOYEE ON HIS UPPER LEG.

ROOF FALL 1ST SOUTH PANEL OFF THE 3RD EAST SUBMAINS, TRACK ENTRY, AT X-CUT NO. 14 APPROX 20'L 30' WIDE 5'-6' HIGH.

THERE WAS AN APPARENT METHANE IGNITION AT THE NO.3 UNIT (MMU 003-0) FEEDER CONVEYOR. THERE WAS A FLAME FOR APPROX 30-40 SECONDS ABOVE THE COAL INSIDE THE FEEDER CONVEYOR. THERE WERE NO INJUR IES AND NO EQUIPMENT DAMAGE.

EMPLOYEE WAS HOLDING A TRAILING CABLE WHILE THE REPAIRMAN WAS CUTTING OFF A TAPED SPLICE. THE KNIFE SLIPPED AND CUT EMPLOYEE ON HIS RIGHT HAND BETWEEN HIS THUMB AND NO. 2 FINGER.

EE STATED HE WAS CHANGING OUT BELT BOTTOM ROLLER ROLLER SLIPPED AND CAUGHT HIS NO. 4 FINGER R HAND BETWEEN BELT ROPE AND BOTTOM ROLLER CAUSING A SIMPLE FRACTURE TO HIS FINGER.

A ROOF FALL OCCURRED OUTBY THE NO.2 UNIT IN THE NO.5 ENTRY 60 FEET INBY SPAD NO.12 + 30, 30 FEET LONG X 20 FEET WIDE X 6 FEET HIGH.

A ROOF FALL OCCURRED ON THE 6TH SOUTH PANEL 5 ENTRY AT SPAD NO. 12 & 30 APPROX. 20 FT WIDE X 20 FT LONG X 7 FT HIGH DEVELOPED IN SEPT 1992.

EMPLOYEE STATED HE WAS CHANGING OUT FLIGHT IN THE FEEDER CONVEYOR CHAIN WHEN HE LIFTED THE FLIGHT HE FELT PAIN IN HIS GROIN AREA.

ROOF FALL, 6TH SOUTH PANEL, NO. 1 ENTRY 60' OUTBY SPAD 11+70. APPROX. 20' LONG 35' WIDE 6' HIGH.

EMPLOYEE STATED HE WAS LIFTING REEL COVER OFF FLETCHER ROOF BOLTER, WHEN HE FELT PAIN IN HIS LEFT GROIND AREA.

EMPLOYEE STATED HE WAS GETTING READY TO ROCK DUST, A PIECE OF ROCK FELL FROM THE ROOF, STRUCK EMPLOYEE ON HIS HEAD, KNOCKED EMPLOYEES HARD HAT OFF HIS HEAD, SECOND PIECE OF ROCK FELL AND STRUC K EMPLOYEE ON TOP OF HEAD, CAUSING A LACERATION ON TOP OF HIS HEAD.

A ROOF FALL OCCURRED ON THE NO.2 UNIT'S TRACK AT CROSS CUT NO.12, 8 CROSS CUT OUTBY THE DUMPING POINT. MEASURED 20' WIDE X 20' LONG X 5 1/2' HIGH.

EMPL OPERATING CONT.MINER WITH REMOTE CONTROL. PIECE OF ROCK FELL FROM THE ROOF STRUCK EMPL ON LEFT SHOULDER AND HAND CAUSING A BRUISE TO HAND AND SHOULDER.

A ROOF FALL OCCURRED TWO CROSS CUTS OUTBY THE DUMPING POINT ON THE NO.3 UNIT BETWEEN CROSS CUT NO.5 1410 & 1470. 30 FEET LONG X 20 FEET WIDE X 8 FEET HIGH.

EE STATED HE WAS LIFTING THE HIGH VOLTAGE CABLE HANGING THE CABLE TO THE MINE ROOF, STRAINED HIS LOWER BACK.

EE STATED HE WAS WALKING UNDERGROUND WHEN A PIECE OF ROCK FELL FROM THE ROOF AND STRUCK EE ON HIS HEAD NECK AND LEFT SHOULDER HE STATED MISSING WORK ON 10-13-92.

EMPLOYEE WAS REINSTALLING DUCK WORK ON A CONT MINER THE DUCK WORK FELL OFF SUPPORT BOARD CATCHING HIS FINGER

A ROOF FALL OCCURRED OUTBY THE NO. 2 UNIT AT CROSSCUT NO. 11 AT SPAD NO. 4+80, 20' WIDE X 20' LONG X 6' HIGH.

EMPLOYEE STATED HE WAS LIFTING A PIECE OF SCRAP METAL TO PUT IN TRASH BIN WHEN HE FELT PAIN IN HIS LOWER BACK.

CARRYING BOX OF SIGNS TO LOAD INTO BACK OF PICKUP TRUCK WHEN BOX SLIPPED FROM CORASP & FELL STRIKING EMPLOYEE'S L FOOT.

OPERATING ROOF BOLTER, SMALL PIECE OF DRAW ROCK FELL STRIKING HIS LEFT SHOULDER.

ROOF FALL 5TH SOUTH PANEL,#2 ENTRY AT SPAD #13 & 50. 20'LONG X 18'WIDE X 6-7'HIGH.

EMPLOYEE WAS HANDLING A BELT TAIL JACK PIPE THE PIPE SLID OVER CATCHING HIS FINGER AGAINST A TAIL JACK

ROOF FALL 5TH SOUTH PANEL BELT ENTRY AT SPAD 2 &30 APPROX. 40 FT LONG 18 FT WIDE 6FT TO 7FT HIGH.

EMPLOYEE STATED WAS STEPPING OUT OF OPERATING COMPARTMENT OF SCOOP SLIPPED ON A LUMP OF COAL & FELL TO THE MINE FLOOR TWISTING HIS R KNEE STARTED LOSING TIME 09-09-92

10966F FALL OCCURRED IN THE 6TH SOUTH PANEL #1 ENTRY TWO CROSS CUTS INBY SPAD NO 3 3 +80 LENGTH 18 FT XWIDTH 30 FT X 6 TO 7 FEET HIGH.

EMPLOYEE STATED HE FELT PAIN IN LOWER BACK AS HE POSITIONED PORT-A-POWER IN PLACE IN SILO.

96660FALL #1 RETURN ENTRY,6TH SOUTH PANEL AT SPAD 3/80. 20'LONG X 18'WIDE X 6-7'HIGH.

54736YEE STATED GRINDER SLIPPED OFF OF HOOD WHILE GRINDING METAL CUT L FOREARM STITCHES TAKEN

54736YEE STATED HE WAS RECLAIMING KENNEDY METAL STOPPINGS. HE WAS KICKING OUT THE BOTTOM OF THE STOPPING WHEN HE FELT PAIN IN HIS LOWER BACK.

96660FALL #3 ENTRY #1 UNIT AT SPAD 71+10 APPROX 40FT LONG 70FT WIDE 5FT TO 6FT HIGH

96660FALL 5TH SO PANEL #1 ENTRY AT SPAD 7&30 (OFF 1ST NW SUBMAINES)

96660FALL #5 UNIT AT INTERESECTION WHERE #1 ROOM AND #6 ENTRY INTERSERT. APPROX. 20' LONG 20' WIDE 6' HIGH.

54730OPERATING SCOOP DURING SHIFT FELT PAIN IN LOWER LEFT LEG AND LEFT ANKLE DUE TO PRESSING ON BRAKE PEDAL.

54736YEE WAS PLACING ACETYLENE TANK IN UP-RIGHT POSITION AGAINST THE COAL RIB LINE. HE TWISTED AROUND WITH THE TANK AND FELT PAIN IN HIS LOWER BACK.

54736YEE STATED HE WAS OPERATING THE CONTINUOUS MINER WHEN A PIECE OF DRAW ROCK FELL FROM THE ROOF AND STRUCK THE EMPLOYEE ON HIS RIGHT HAND CAUSING INTERNAL PAIN.

42957 PRY BAR TO SLEW DUMPSTER AROUND, THE PRY BAR SLIPPED FELL ON TOP OF EMP L FOOT

96660FALL 6TH SOUTH PANEL, #2 ENTRY 2 X-CUT OUTBY #2 UNIT TAIL PIECE.

25330CHAIN BEING USED TO HOLD DOWN TROLLY POLE CAME LOOSE AND STRUCK EMP ON BACK OF KNEE

54736YEE WAS JARRED AS HE WAS ATTEMPTING TO DISLODGE SLURRY FROM BUCKET OF ENDLOADER. AS SLURRY FELL OUT, MACHINE BOUNCED CAUSING EMPLOYEE TO BE JARRED.

96660FALL, #2 UNIT (002-0) IN BELT ENTRY AT LOCATION WHERE BELT TAIL AND FEEDER WAS LOCATED. APPROX. 30' LONG, 30' WIDE, 8'-10' HIGH.

ROOF FALL, 1ST SOUTH PANEL OFF 3RD EAST SUBMAINS IN BELT ENTRY AT CROSSCUT NO. 26. APPROX. 35' LONG, 20' WIDE, 5 1/2' HIGH.

EMPLOYEE WAS CLEANING UP AFTER FINISH CUTTING PLACE WITH CONTINUOUS MINER. HE WAS STANDING BETWEEN ROOF BOLTS (4 ROWS BACK FROM FACE) WITH REMOTE CONTROL BOX. ROCK FELL BETWEEN BOLTS, STRUCK E MPLOYEE ON TOP OF HEAD, RIGHT ELBOW AND KNEE.

10966F FALL OCCURRED ON THE 1ST NORTHWEST SUBMAIN BELT LINE LENGTH 30FT X WIDTH 20FT X5FT THICKNESS

EMPLOYEE STATED HE WAS LIFTING BELT TOOLS AND FELT PAIN IN HIS LOWER BACK.

54736YEE STATED HE WAS WALKING UG CARRYING HEADER BOARDS,DUCKED TO GO UNDER TRAILING CABLE TOED TO ROOF,RAISED UP AND STRUCK HIS HEAD AGAINST A WOODEN HEADER BOARD.

54736YEE STATED HE WAS OPERATING ROOF BOLTER EMPLOYEE WAS DOWN ON HIS KNEES WHEN HIS FOOT SLIPPED WHILE THE BOOM OF THE ROOF BOLTER WAS BEING LOWERED THE EMPLOYEES LEFT KNEE WAS CAUGHT UNDER T 85026OM OF THE ROOF BOLTER

10966F FALL OCCURRED ON THE NO 1 UNIT-NO 2 ENTRY IN THE RETURN AIR COURSE.APPROX 80 FT LONG X19 FEET WIDE X6 FEET HIGH.

54736YEE STATED HE WAS LIFTINGA PIECE OF BELT STRUCTURE AND FELT PAIN IN HIS LOWER BACK.

A ROOF FALL OCCURED ONT HE #5 UNIT'S FACE BELT AT NO. 11 CROSS-CUT AT SPAD NO. 4+20 THE LENGTH WAS 20 FEET X 20 FEET WIDE X 7 FEET HIGH.

EMPLOYEE STATED WHEN TURNING IN SHUTTLE CAR OPERATOR'S COMPARTMENT FEET WAS WET CAUSING HIS FOOT TO SLIP RESULTING IN A STRAIN TO RIGHT KNEE.

EMPLOYEE WORKED DURING THE SHIFT HELPING INSTALL I-BEAN ARCHES. AT THE END OF HIS SHIFT BE COMPLAINED OF BACK PAINS.

ROOF FALL IN #1 ENTRY,2ND EAST MAINS. 120'OUTBY LOCATION WHERE 2ND EAST MAINS INTERSECT WITH 1ST M.N. ENTRIES. 25'LONG X 18'WIDE X 5'HIGH.

EE STATED HE WAS WALKING AND STRUCK HIS HEAD AGAINST A HEADER BOARD BOLTED TO THE ROOF JAMMING HIS NECK.

EMPLOYEE WAS OPERATING A ROOF BOLTER MACHINE INSTALLING ROOF BOLT BENDING A ROOF BOLT FELT PAIN IN THE GROIN AREA POSSIBLE RUPTURE

EMPL CAUGHT HAND BETWEEN ANGLE-IRON AND BELT STRUCTURE. AS HE RODE MANTRIP TO TOP OF TIPPLE.

54736YEE STATED HE WAS WALKING TOWARD FACE OF COAL TRIPPED AND FELL OVER ROOF BOLTER MACHINE TRAILING CABLE,CAUSING A BRUISE TO HIS RIGHT ELBOW.

EMPL GOT TOO HOT WHILE CUTTING IN RECIRCULATING TANK IN WASHER.

ROOF FALL MAIN NORTH WEST ENTRIES.#7 ENTRY AT SPAD 43 /60. 20-24'LONG X 18'WIDE 6-7'HIGH.

EE WAS OPERATING ROOF BOLTER, BOLT BENT HE REACHED AND WAS GRASPING THE BOLT, HE ACCIDENTLY TURN ON THE MACHINES ROTATION THE BOLT SPUN AROUND AND STRUCK HIS FOREARM.

EMPLOYEE STATED HIS INDEX FINGER ON LEFT HAND WAS CAUGHT BETWEEN THE HYDRAULIC HOSE OVER LID AND FRAME OF CONTINUOUS MINER FRAME WHEN LID COVER FELL CAUSING A FRACTURE BEHIND THE FIRSDT JOINT ON FINGER.

EE WAS CARRYING A 5 GAL CAN OF OIL FROM THE SCOOP BUCKET TO THE CONT. MINER, FELT PAIN TO LOWER BACK STARTED LOOSING TIME 6-24-92.

A ROOF FALL OCCURRED ON THE 2ND WEST TRACK ENTRY AT APPROX. 4:30 AM SIZE OF FALL 20 FEET X 20 FEET X 5 FEET HIGH, TOP WAS BOLTED WITH 4' RESING BOLTS.

A ROOF FALL OCCURRED IN THE 2ND SUB MAIN WEST IN THE 3 RETURN ENTRY SIZE OF FALL 125 FEET LONG X 20 FET WIDE X 7 FT HIGH LENGTH OF ROOF BOLTS ARE 5 FOOT POINT ANCHOR MINED APPROX. 6-1-92.

OPER RIB AT FACE HOSE BLOWED OIL OVER L EYE

ROOF FALL #3 UNIT FACE BELT ENTRY. (2ND SOUTH PANEL OFF 2ND SUBMAIN WEST) 35' LONG, 20' WIDE, 5'-6' HIGH.

EMPLOYEE STATED HE WAS CUTTING PLATE & IT SHIFTED AS HE REACHED TO GRAB IT HE FELT PAIN IN RIB CAGE.

EMPLOYEE STATED: HE WAS OPERATING A ROOF BOLTER AT THE FACE WHEN A PIECE OF DRAW ROCK FELL STRIKING HIS FOOT IN BEHIND THE METATARSAL GUARD OF HIS BOOT.

EMPLOYEE STATED HE STRAINED HIS SHOULDER WHILE LIFTING BELT STRUCTURE

EMPL OPERATING ROOF BOLTER,STEPPED ON A ROCK SLIPPED & FELL BRUISED LOWER BACK.

EE STATED HE WAS AT FRONT OF MACHINE BE TURNED TO WALK TO BACK OF MACHINE KNEE POPPED, FELT PAIN TO KNEE.

EMPLOYEE REPORTED: OPERATING S/C, HIT BUMP IN HAUL ROAD CAUSING BRAKES OF MACHINE TO LOCK-UP. HIS BACK STRUCK SIDE OF OPERATOR'S COMPARTMENT.

EMPLOYEE STATED SHE WAS ROCKDUSTING BACKED THROUGH A CURTAIN STUMBLED OVER LOOSE COAL AND TWISTED HER RIGHT KNEE.

EMPLOYEE STATED HE STRUCK HIS HEAD AGAINST A WOODEN HEADER BOARD, WHILE WALKING IN A LOW AREA OF THE MINE.

ROOF FALL, X-CUT 48, MAIN NORTH ENTRIES ALONG 1ST ANGLE BELT LINE.

EMPLOYEE STATED HE WAS USING PRY BAR TO PRY A PIECE OF METAL WHEN A PIECE OF COAL HIT BAR CAUSING IT TO STRIKE METAL KNOCKING RIGHT THUMB NAIL OFF.

EMPLOYEE STATED HE WAS LIFTING A BELT STRUCTURE FRAME PUTTING IT UNDER THE NEW BELT EXTENSION WHEN HE FELT PAIN IN HIS LOWER BACK.

THE EE WAS OPERATING A DOUBLE BOOM ROOF BOLTER WHEN APIECE OF ROCK FELL FROM THE ROOF STRIKING EE ON TOP OF HEAD CAUSING PAIN TO HIS NECK.

EMPLOYEE STATED AS HE WAS CHIPPING SLAG AFTER USING CUTTING TROCH HE HIT HIS RIGHT MIDDLE FINGER ON METAL SIDING.

A ROOF FALL 10FT HIGH X20FT WIDE X20FT LONG ON THE 2ND MAIN WEST BELT AT NO 60 CROSSCUT IN THE BELT ENTRY 4 CROSSCUTS OUTBY THE 1ST SUBMAIN SO TRACK SWITCH

EMPLOYEE WAS OPERATING A ONCTINUOUS MINER ALONG THE REIBLINE UNDER SUPPORTED ROOF WHEN A PIECE OF DRAW ROCK FELL FROM THE ROOF STRIKING THE EMPLOYEE ON THE RIGHT SHOUDLER CAUSING A BRUISE TO T HE EMPLOYEE'S SHOULDER.

EMPLOYEE REPORTED HE WAS BOLTING AT THE FACE THERE WAS TOP COAL STILL PRESENT ALONG THE MINE ROOF HE WAS USING A PRY BAR TO PULL THE TOP COAL DOWN WHEN PRESSURE WAS APPLIED ON THE PRY BAR PAIN WAS FELT IN LOWER BACK

EMPLOYEE WAS HELPING ROOF BOLTER OPERATOR INSTALL A ROOF BOLT WHEN A LOOSE PIECE OF ROCK REFLL UT STRIKING THE EMPLOYEE ON THE LEFT EAR & LEFT HAND

EMPLOYEE WAS STANDING BESIDE THE ROOF BOLTING MACHINE A PIECE OF DRAW ROCK FELL FROM ROOF STRIKING EMPLOYEE ON HIS HEAD AND LEFT THUMB.