Anchor Stone Company-Tulsa Rock #2: 205 MSHA citations Metal/Non-Metal

Removing a come along chain under extreme tension. Either the hook slipped or failed and mechanism snapped back and hit the bridge of nose and between eyebrows requiring stitches

Pulling the steel tubing through a hole when one side of the tubing went down and the other side went up smashing right index finger between the tubing and the catwalk.

Employee had a seizure and fell down on the shop floor and hit the back of head.

Unknown

While driving 980 Loader drove over pot hole and bottomed loader out, causing back pain.

While climbing from primary hopper, employee was holding onto angle iron that broke causing employee to fall 3' to 4' to the ground.

While picking up shaker with crane, got left hand caught between the crane and the shaker.

While doing maintenance on 990 Cat front end loader, employee slipped on ice and fell down the stairs on back of loader hitting head and fracturing right ankle.

While jerking on come-a-long on wash plant, right elbow popped out.

While fixing ramp with loader, the wheel dropped off on right side, jerking EE to left side and hit loader with his left shoulder.

While trying to untwist 8" water pump line, hose line twisted around employee.

While stepping down off water truck placed foot in a low area on ground, spraining ankle and causing back pain.

While attempting to put new bar in primary crusher, left middle finger got caught between bar and rotor.

While running loader hit solid material and had pain in lower back.

While closing crusher hood, slipped and fell.

While doing maintenance on Dozer, slipped on diesel fuel on track and fell onto right knee.

While cleaning crusher with jackhammer, while dislodging jackhammer, he felt lower back pain.

While stepping down ladder off the chips stacker, foot slipped, causing strain in back.

WHILE CUTTING METAL WITH 4 1/2" GRINDER WITH CUT-OFF WHEEL, WHEEL BROKE, CUTTING HIS FINGER.

WHILE CLEANING ON SURGE TUNNEL, LIFTED STEPS THAT WERE BENT AND TRIED TO STRAIGHTEN THEM, HURTING HIS BACK.

WHILE COMING DOWN THE LADDER ON LOADER, EE TWISTED ANKLE ON LAST STEP.

WHILE HITTING ON CROW BAR WITH HAMMER, A PIECE OF METAL FLEW UP INTO RIGHT EYE.

WHILE CLEANING OUT WASH PLANT SCREEN TOWER, ANOTHER EMPLOYEE HIT HIM IN THE BACK WITH A PIC AX.

WHILE GRADING HAUL PIT ROAD IN PLANT, HAUL TRUCK RAN INTO GRADER, CAUSING EMPLOYEE TO JUMP OFF GRADER.

WHILE HAULING ROCK FROM PIT TO CRUSHER IN HAUL TRUCK, HAUL TRUCK RAN INTO GRADER THAT WAS GRADING HAUL PIT ROAD IN PLANT.

WHILE WINCHING CABLE TO OPEN SHOOT, THE COG CAME LOOSE HOLDING WINCH HANDLE CAUSING HANDLE TO SPIN AROUND HITTING RIGHT INDEX FINGER.

WHILE INSTALLING BUCKET LINK ON 990 LOADER, SHOP CRANED RUBBED LOADER ARM DISLODGING DIRT ON ARM CAUSING DIRT TO GET INTO LEFT EYE.

WHILE GETTING UP ON THE CONVEYOR, EE SLIPPED AND HIT HIS RIBS ON THE CONVEYOR FRAME.

WHILE CLIMBING DOWN LADDER ON PRIMARY CRUSHER, 4TH STEP BROKE CAUSING EE TO FALL ON CRUSHER HITTING MIDDLE OF HIS BACK.

EMPLOYEE WAS INSTALLING UPPER ENGINE COMPARTMENT PANEL WHEN PANEL STUCK, THEN WHEN PANEL WAS FREED, IT CAME DOWN ON RIGHT HAND RING FINGER, CUTTING FINGER.

HURT BACK WHILE SHOVELING IN PLANT.

WHILE WALKING UP THE SCREEN'S CATWALK, EMPLOYEE STUMBLED, CATCHING LEFT HAND ON SCREEN GUARD BY THE BINDER PULLEYS, AND CUT HIS LEFT HAND.

WHILE TRYING TO MOVE SCREEN, OTHER SCREENS CAME LOOSE PUSHING EMPLOYEE AND PINNING EMPLOYEE BETWEEN SCREENS

WHILE CLIMBING DOWN OFF 990 LOADER, MISSED A STEP AND FELL TO GROUND FRACTURING LEFT WRIST

WHILE WALKING THROUGH PLANT, STEPPED OVER STEEL ON GROUND AND TWISTED RIGHT KNEE.

WHILE INSTALLING TRANSMISSION IN CAT 988B INTO ITS CASE, THOUGHT SHOP HOIST STILL HAD TENSION ONCRANE, HAD 3RD FINGER ON RIGHT HAND BETWEEN TRANSMISSION AND CASE WHEN TRANSMISSION DROPPED INTO CASE, CUTTING TIP OF FINGER OFF.

WHILE CLEAING HAUL UNIT IN ORDER TO FIND AN OIL LEAK, LADDER SLIPPED AN DEMPLOYEE FELL ON LEFT FOOT.

WHILE PUTTING A BELT ON NO. 1 CRUSHER, CAUGHT THIRD FINGER ON LEFT HAND IN THE SHEAVE.

EMPLOYEE WAS TREATED FOR NECK STRAIN/SPASM ON 6/13/94 WITH NO LOST TIME. CURRENT NECK AND UPPER BACK CONDITION IS DUE TO INJURY OF 6/13/94 PER DR. KRIS ARMSTRONG. (PLEASE SEE ATTACHED LETTER F ROM DR. ARMSTRONG)

WHILE WALKING UP TO THE SECONDARY CRUSHER BUILDING, TRIPPED ON WALKWAY AND FELL ON LEFT KNEE.

WAS STANDING ON A LADDER WHILE USING A PRY BAR & HURT BAKC

WHILE DRIVING A BOLT IN HOLE, A PIECE OF METAL CAME OFF PUNCH AND WENT INTO JOINT ON INDEX FINGER OF LEFT HAND.

CUT LEFT HAND WITH UTILITY KNIFE WHILE REMOVING WRAPPER OFF ROLL OF 8" DISCHARGE HOSE. REQUIRED 3 STITCHES.

WHILE LETTING SIDE KICK DOWN EE HAD HIS FINGER IN ADJUSTMENT BOLT HOLE, AND WHEN HE PULLED BOLT OUT SIDE KICK DROPPED, CUTTING TIP END OFF INDEX FINGER ON RIGHT HAND.

EE WAS WORKING ON A CONVEYOR SCREEN. HE BENT DOWN TO STRAIGHTEN A ROLL OF 60 FOOT BELT. IT WAS TO HEAVE AND HE PULLED HIS BACK.

HE WAS WORKIGN ON A PUMP IMPELLER HOUSING AND IT SLIPPED AND FELL CUTTING HIS FINGER.

EMPL WAS HITTING ON BARS IN THE CRUSHER WITH A 16 LB. SLEDGE HAMMER. EMPL HURT HIS RIGHT WRIST.EMPL TORE THE LIGAMENTS.

EE WAS STANDING ON A CATWALK, WHEN ANOTHER EMPLOYEE JUMPED ONTO IT FROM THE CONVEYOR ABOVE. THE CATWALK GAVE AWAY AND THEY BOTH FELL TO THE GROUND ABOUT 22 FEET.

INJURED WAS WORKING ON CONVEYOR WHEN HE JUMPED DOWN ONTO THE CATWALK BELOW,ABOUT 48 INCHES.THE CATWALK GAVE WAY AND HE FELL TO THE GROUND ABOUT 22 FEET.

EE WAS PULLING A CONVEYOR BELT & SLIPPE3D ON FROSTED GROUND & LANDED ON HIS TAILBONE

THE NIGHT SHIFT WAS WORKING ON THE V.S.I IMPACTOR. THEY WERE GOING TO START IT UP AND SEE IF IT WAS WORKING WHEN A 20" X 3' LONG PIECE OF PIPE FELL OFF AND STRUCK HIM ON THE RIGHT SHOULDER AND LOWER BACK.

WHILE MOVING ELECTRIC WIRES AWAY FROM A SHOT THEY PUT THE WIRE IN THE BACK OF A TRUCK.INJURED GOT IN BACK OF TRUCK,THEY STARTED DRIVING OFF.THE WIRES GOT HUNG ON A ROCK WHILE THEY WERE DRAGGIN G BEHIND THE TRUCK,PULLING INJURED OUT OF THE TRUCK.

PULLING HOIST ACROSS FLOOR R KNEE GAVE OUT

EE WAS IN PROCESS OF DRIVING TRUCK UP RAMP, WHILE AT THE FOOT OF RAMP HE TURNED TRUCK TOO FAR TO THE RIGHT AND RIGHT FRONT TIRE WENT OFF RAMP TURNING TRUCK OVER.

WHILE WORKING ON HIS KNEES FOR A LONG PERIOD OF TIME RIGHT KNEE STARTED HURTING .WAS ON KNEE SHOVELING UNDER THE TAIL PULLEY ON THE PRIMARY BELT.

SHARPENING POCKET KNIFE,MISSED SHARPENER AND CUT HAND.

PUTTING ON NEW FITTING WITH PIPE WRENCH SMASHED RIGHT INDEX FINGER.

HWILE GETTING OFF LOADER, LEFT HAND SLIPPED OFF AND EMPLOYEE FELL ON LEFT LEG.

WHILE CUTTING CONVEYOR BELT CUT RIGHT KNEE.

TAKING OFF SHEAVE ON MOTOR,RACHET SLIPPED OFF AND HIS WEIGHT WENT ON RIGHT FOOT CAUSING TWISTED RIGHT ANKLE.

WHILE SHOVELING3EMPLOYEE PULLED BACK-LUMBAR STRAIN.

A MAINTENANCE P9RSON WALKING DOWN A BELT CONVEYOR OR HOLDING ONTO THE GUARD RAILS BUT WAS CARRYING TOOLS IN HIS HAND WHEN HIS FOOT SLIPPED. HE FELL FROM THE CONVEYOR SLIPPING UNDER THE RAIL GU ARD LANDING ON 5 PILE OF SCREENINGS. HE SUFFERED A FRACTURED VERTEBRAE AND CRACKED RIBS

HE WAS PUTTING GEAR BOX IN BACK OF TRUCK AND MASHED FINGER BETWEEN GEAR BOX AN D TAILGATE.

I.NAME PULLING ON ROPE ATTACHED TO CONV BELT THAT WAS BROKEN AND BEING REPAIRED.

WHILE LIFTING CONVEYOR INTO PLACE,FINGER CAUGHT BETWEEN LIFTING CABLE AND CONVETOR FRAME.