Davis Rock Quarry Metal/Non-Metal

Employee was working on an electrical unit was electrocuted.

EE was moving a barrel that had liquid and material in it and went to move it and tweaked lower back. Now when moving it side to side it has sharp pains.

Crusher was plugged and we were try unplugging it and I was on the crusher floor stabbing the side of the crusher with a pry bar to knock the rock down and while doing it my right wrist popped. I now have a sharp pain in my wrist, hard to lift anything and rotate. I did not stash it and it is not swollen just hurts when I move it

EE was cleaning by W-11 on the stand-up skid steer. EE went to back drag a pile and hit forward instead of reverse and hit the pile and pinned EE's hand under the conveyor frame to the top of the skid steer handle.

Prying a rock out and cutting EE's finger and got stitches

One employee threw a shovel up to another employee cutting the catchers hand.

Employee operating the unit, was struck with a come-a-long on their right hand due to being in the line of fire.

EE was working on some parts and the door to the area EE was working in started to shut and EE stuck hand in to catch it.

Employee was changing a conveyor belt, slipped, and hit hardhat on a concrete pillar causing it to come off. EE was seen for a concussion.

Employee picked up a hydraulic line to clean under it and it broke, striking them in the face. Employee received 5 stitches.

Employee was walking through the scale house and slipped, breaking EE's wrist.

Employee was walking down the stairs, slipped, and fell to the ground face first. Employee received stitches to the nose and scraped up their face.

Employee was cleaning the windshield on the loader and fell, twisting ankle. Later medical attention found a fracture of the tibia.

Employee was trimming trees on the entrance road to the quarry when the employee slipped and struck face on a tree limb.

Employee fell from the fuel platform after fueling the loader.

Employee dropped a piece of metal on the top of their foot, above the safety toe, causing a fracture.

Employee reported 9/23/15 that he hurt his back 9/22/15 installing new shoes on the VSI. He refused medical treatment until 9/24/15.

Employee was shoveling off the F4 conveyor when his lower back locked up.

Employee was reaching for the handle on his loader when he struck his hand against it instead, causing it to bruise.

Rigger failed to pay attention to details of task. When trailer attachment moved, the employee slipped and fell. Falling 9' shock absorber deployed. The employee did not hit the ground or any other object. Employee was bruised and sore.

After checking the oil on her haul truck, she went to unlatch the hood and it fell on her right foot, bruising it.

Employee states he injured his upper back and neck while operating a haul truck. He did not seek medical attention until 4/13/15.

Employee was walking out of the warehouse when he slipped on the ice hurting his left hip, back, and right elbow. He didn't seek treatment until 2/25/15, where he was placed on restricted duty.

Employee states that he was walking down the steps of the plant and felt a sharp pain in his back. This injury was not reported until late the next day.

EE was attaching a cable on the fluid drive when the guard slipped, cutting his finger.

An employee was working on a drive belt on a screen unit in the mill. His back started to hurt later and into the next day.

Employee was climbing the ladder to the water truck when he felt a pop in his right shoulder.

Was working with another employee on a conveyor when the other employee turned towards him with a cutting tool in hand and cut his left arm, requiring stitches.

Employee was greasing a conveyor belt and tripped over an eight inch rock. He braced himself for the fall and broke his wrist.

Employee was climbing down the ladder from the wash plant and twisted his ankle.

Employee was moving pipe off a stack of concrete when the pipe fell smashing his finger and cutting it.

During a belt splice, employee got between return and feed and used his back to push up on the feed resulting in injury.

Pulling breaker out of unused breaker box, fuse came down and hit L index finger

EE alleges that he was pulling himself into a truck and hurt his shoulder. He had predicted a few days before this that he was going to claim a shoulder injury.

EE fell off the ladder of his haul truck. He landed on the ground, fracturing both feet.

Employee was getting out of a stockpile loader and hit his knee on the door frame. We filled this out online on 11/18/2010 and reported on our 4th Quarter report. It wasn't until today that we realized that we had not pushed "Submit This Form to MSHA" after completing online. Sorry for delay.

Employee was lifting a back plate and strained his right arm. He did not seek medical attention and began losing time 12 August 2010.

Not a Dolese employee. Customer suffered apparent heart attack in his truck near Scale House. Customer died enroute to hospital.

EE was moving and oil barrel and felt pain in his lower abdomen.

Injured hurt his back while digging holes on a shot with a shovel.

Hot embers from fire two days ago blew across yard at mine and ignited cedar trees and a pile of cross ties. We reported again because fire was not extinguished within 30 minutes of discovery.

Mine neighbor had a controlled burn that he lost control of. Fire spread across line to mine property where a stack of junk loader tires caught on fire. Fire took more than 30 minutes after time of discovery to extinguish.

Employee was working with other employees to get a stuck tooth shank out of the 42 crusher. The tooth struck his chest.

EE was dragging a water hose. He slipped in mud and fell, striking his left hand on an I-beam.

Employee was using an extendalift to try to pull a post out of the ground. It came loose and struck his head. Four stitches were required.

Injury was carrying steel plates. He tripped on an extension cord and smashed his left hand between the plates and a work bench.

EE picked up a cable to hook to overhead crane. An I-beam rolled and fell, striking EE in the back of the head. Sutures were required.

Employee was cutting belt for the Qr2 conveyor. The blade slipped and cut his left arm. Stitches were required

EE was shoveling in a tunnel. His shovel hit a nail and injured his left wrist. He did not begin working restricted duty until 1 May 2008.

Employee was helping clean rock off a conveyor and strained his back.

EE was cutting belt with a box blade knife. The knife slipped and cut his right thigh. No lost time, no restricted duty but three sutures were required.

Employee strained his lower back and abdomen while lifting drive-line for water tank.

Employee was moving a troughing roller. The roller twisted and smashed his left index finger. Stitches were required.

EE was lifting a cable sling to hook onto a loader and strained his lower back.

EE's back started hurting after helping to load a flatbed truck with 50 lb. bags of rock samples and driving a flatbed truck. He did not seek medical attention until 7 June 2007 and began working light duty 8 June 2007.

Employee was a passenger in a mechanic truck when a loader backed off the ramp and struck the side of the mechanic truck. Employee's knee and back were injured. He is still working resitrcted duty.

EE strained his back while removing a rock sample from the scales.

EE was lifting and moving parts in the shop when he strained his lower back.

Employee was climbing into his loader to start his shift. When he pulled on the door, he lost his balance and fell to the ground. His right hand, head, and left hip were injured. He is losing time.

Employee was working with other employees to repair the brakes on a Caterpillar 980 loader. A spring pin was stuck. He was looking at it when it came loose and struck his forehead. He is working light duty and stitches were required.

EE reported that he felt pain in his shoulders after removing a piece of concrete from the bottom hopper at the wash plant. He did not seek medical attention until 14 July 2006. His first day off work was 14 July 2006.

Employee was using a magnetic drill to drill holes in a thick metal plate. While he was removing the metal shavings from the hole, the index finger on his left hand was cut. EE received two sutures and began working restricted duty 03/30/06

Employee was measuring screens in the screen rack. A screen slipped and mashed the little finger on his right hand. Employee began working restricted duty on 29 March 2006 but his job duties as a supervisor were not really affected.

EE, was getting into a water truck and slipped and fell, injuring his left arm and left leg.

Employee was backing a stockpile truck. He was looking behind him and turning steering wheel and felt pain in his back. He is working restricted duty.

Employee was fueling his loader at the fuel island and strained his right arm. He did not seek medical attention until 9 August 2006 and began working restricted duty 10 August 2006.

Employee was moving a metal cut-off saw in the truck shop and felt a twinge in his abdomen. Happened sometime after midnight. Not sure of time.

This is not a work-related injury, not covered by workers' comp but it did happen in the employee parking lot before Employee and co-worker clocked in. Employee was walking in the employee parking lot and was struck by co-workers personal vehicle. Right arm and right leg were bruised and strained. Employee missed work 8 & 9 Dec and returned 12 Dec to regular duties.

Employee was moving a piece of metal plate and strained his back and right shoulder.

Employee was operating a Caterpillar 980 loader loading rip rap when a rock fell off the bucket. He did not notice the rock and backed over it, injuring his back and left shoulder.

EE was carrying a sack of floor absorbent up the stairs. His right knee gave out and he struck his knee on the stairs.

Employee had opened a metal container of welding rods. When he reached inside the container, he cut his left palm on the metal pop top lid. There was no lost time and no restricted duty but stitches were required.

Employee was exiting a lift basket on the electric truck. He sprained his left ankle as he stepped to the ground. He was placed on restricted duty.

EE was operating a Caterpillar 980F loader. He reached over to turn on the heater fan and injured his left shoulder. EE did not begin losing time until 4/25/05.

EE was working with other employees to mount a tire on a Caterpillar 980 loader. While pushing on the tire to align the bolt holes, he strained his back.

EE was climbing onto a Caterpillar 980 loader. When he reached the top step, his foot slipped and he fell to the ground, landing in the 3" surge pile. He suffered cuts and bruises to his right knee and both hands.

EE was walking on a metal truss at the crusher building. There was frost on the truss and EE slipped and fell. He landed on a C-channel purlin.

EE WAS IN THE PROCESS OF CHANGING A 2" AIR SWIVELL, SLIPPED AND FELL APPROX 2' AND LANDED ON BACK

Employee strained his left shoulder while lining up I-beams on the crusher building to be welded.

Injured employee was working with another employee to install a conveyor. He was working below the other employee. The other employee cut off a piece of T-channel iron and as he was handing it down to injured ee, it slipped and fell approx. 1 foot and struck injured ee in the face, causing a laceration. There was no lost time - no light duty but sutures were required.

EE was working with other employees to pull sunatube hole liners from blast holes. He reported later that he had suffered a groin strain. He first sought medical attention on 11/10/04 and began working light duty at that time.

Employee was lowering a wear plate into a bin. A co-worker was operating the electric winch. The opening in the floor has a bi-fold door of 1/4" floor plate. Employee tripped on the door and fell into the wear plate. His struck the bridge of his nose on the plate. He is off work.

Employee stepped on a rock while doing a pre-operational inspection on a motor grader. He felt pain in his back but did not seek medical attention until 29 October 2004.

EE was greasing conveyor idlers with the belt moving. The grease hose was caught by the moving belt. The hose, gun, and Injured's left arm were pulled into the belt. She suffered 2nd and 3rd degree abrasion burns to her left arm. She is losing time.

EE was using a hydraulic bottle jack and a piece of 4" by 4" wood to straighten a dent in a dust control tube. Under pressure, the jack slipped and the 4x4 struck ee on the nose. His nose was fractured.

Crew was drilling in location where they couldn't quite level the drill. So when making steel connections the drillers helper was having to pull on the drill steel to get it to line up so they could make up. While he was pulling on the steel the driller lowered the steel to make the connection and at that time ee felt something pop in his right elbow.

Employee was walking down and incline and fell, spraining his right ankle. Employee is working restricted duty.

Employee was using a Caterpillar 980G loader to load a customer's trailer. While turning the steering wheel, his left elbow popped. The doctor diagnosed strained left elbow. He is working restricted duty.

Employee was walking on uneven ground and twisted his right knee in March 2004. He did not turn in a work-related injury but sought medical attention on his own through Indian clinics. His injury was determined to be work-related on 4 January 2005. He has been missing time since 13 September 2004.

EE WAS LYING ON THE G1 CONVEYER TAIL PULLEY CUTTING A ROLLER OFF THE CONVEYER. HIS RIBS WEREBRUISED.

EE WAS BENT OVER USING A CUTTING TORCH TO CUT A PIECE OF I-BEAM. WHEN HE STRAIGHTENED UP, HE FELT A SHARP PAIN IN THE MIDDLE OF HIS BACK. HIS BACK WAS STRAINED. HE MISSED ONE DAY OF WORK.

EE WAS USING A KNIFE TO CUT A WELDING LEAD TO INSTALL A CONNECTOR ON THE END OF IT. THE KNIFE SLIPPED AND CUT HIS LEFT THUMB. THERE WAS NO LOST TIME, BUT SUTURES WERE REQUIRED AND EE WORKED FI VE DAYS OF RESTRICTED DUTY.

EE HAD BEEN WELDING AT THE CONSTRUCTION SITE ALL DAY AND SUFFERED SOME KIND OF ALLERGIC REACTION WHICH CAUSED SWELLING IN HIS MOUTH AND RIGHT EYE. IT WAS NEVER DETERMINED WHAT HE HAD REACTED TO. THE EMERGENCY ROOM DOCTOR TOOK HIM OFF WORK FOR 10/30/2003 AND HE TOOK OFF WORK ON HIS OWN FOR 10/31/2003.

EE WAS LOADING A CABLE SLING ONTO A WELDING TRUCK. HE TWISTED AND STRAINED HIS BACK. HE IS WORKING RESTRICTED DUTY.

EE WAS LOADING REBAR ONTO A FORKLIFT. WHILE PULLING ON SOME OF THE PIECES TO GET THE LOAD BALANCED, HE EXPERIENCED BURNING PAIN IN HIM RT. ARM & SHOULDER. EE IS WORKING RESTRICTED DUTY.

EE WAS WORKING WITH OTHER EE TO LIFT A METAL COLUMN INTO PLACE AT THE CONSTRUCTION SITE. THE NEXT DAY HE REPORTED THAT HE HAD FELT A TWINGE IN HIS BACK WHILE LIFTING.

EE WAS CARRYING A THREE-TON RATCHET CHAIN HOIST FROM THE TOP FLOOR OF THE MILL BLDG. TO THE GROUND LEVEL WHEN HE FELT A PAIN IN HIS LOWER BACK.

EMPLOYEE WAS WORKING WITH OTHERS AT THE CONSTRUCTION SITE. THEY WERE MOVING REBAR TOWERS, CONSTRUCTED OF 8 PIECES OF 4-FOOT #8 REBAR TIED TOGETHER IN A SQUARE. HE INJURED HIS LEFT SHOULDER.

EE WAS WORKING WITH OTHER EE TO INSTALL HANDRAILS AT THE CONSTRUCTION SITE. HE ATTEMPTED TO MOVE A HANDRAIL WITHOUT ASSISTANCE AND STRAINED HIS BACK. EE DID NOT SEEK MEDICAL ATTENTION UNTIL 8 AUG 03

EE WAS STANDING ON A LADDER ATTEMPTING TO HOOK UP A COME-A-LONG. HE WAS HOLDING THE CHAIN WHEN THE COME-A-LONG FELL OFF THE LADDER, HIS LEFT ELBOW WAS INJURED. THE INJURY DID NOT BECOME REPORT ABLE UNTIL 9-16-03 WHEN HE DECIDED TO SEEK MEDICAL ATTENTION.

EE WAS WORKING WITH OTHER EE'S TO INSTALL HARD PLATE LINERS IN BINS AT THE CONSTRUCTION SITE. HE WAS IN THE BOTTOM OF THE BIN WHEN AN OXYGEN BOTTLE FELL THROUGH THE ACCESS AT THE TOP OF THE BIN & STRUCK EE

EE WAS WORKING WITH OTHER EE TO MOVE STEEL PLATES BY HAND. HIS BACK BEGAN TO HURT. ON 2 JUNE 2003, HE SAW A DR. AND WAS PLACED ON RESTRICTED DUTY.

EE WAS WALKING BETWEEN BINS. HE SLIPPED ON WET SURFACE. HE GRABBED SOMETHING TO CATCH HIMSELF AND STRAINED MUSCLES IN HIS BACK AND SIDES.

EE WAS USING A WRENCH TO ADJUST SPRINGS ON THE 7' CONE CRUSHER. AFTER AWHILE HE HAD SHARP PAIN IN GROIN AREA.

EE WAS INSTALLING HANDRAILS ON SCAFFOLDING. HIS LEFT ARM WAS INJURED WHILE CARRYING A HANDRAIL.

EE WAS USING A HAMMER TO REMOVE A TOOTH FROM A LOADER BUCKET. A PIECE OF THE TOOTH CAME OFF AND STRUCK HIS LEG. STITCHES REQUIRED.

EE WAS WORKING WITH OTHER EE'S TO MOVE A PIECE OF 8" I-BEAM, APPROX. 14'LONG. IT SLID OFF ANOTHER PIECE & LANDED ON EE'S RIGHT FOOT.

EE WAS USING A PUSH BROOM TO REMOVE MUD FROM THE TRUCK SCALES. HE SLIPPED AND STRAINED HIS BACK.EE DID NOT SEEK MEDICAL ATTENTION & BEGIN LIGHT DUTY UNTIL 3/24/03.

EMPLOYEE WAS HELPING PICK UP A WOOD PALLET WITH A STEEL PLATE ON IT. A PIECE OF STEEL SLID OFF & STRUCK HIS RIGHT FOOT.

EE WAS WORKING AT THE CONSTRUCTION SITE. AS HE WAS EXITING A HOPPER, HE STEPPED ON A WET SURFACE AND SLIPPED AND FELL TO THE GROUND.

EMPLOYEE WAS OPERATING A MAN LIFT. HE WAS SCOPING UP WHEN THE SWITCH HUNG IN POSITION AND CAUSED LIFT TO KEEP GOING UP. HIS LEFT ARM WAS CAUGHT BETWEEN THE MAIN BEAM AND THE MAN LIFT.

EE WAS CLEANING THE CSI CRUSHER WHEN HE SLIPPED AND FELL TO THE GROUND.

EE STRAINED HIS BACK WHILE TURNING OVER HAND RAILS TO BE SAND BLASTED.

EE WAS CLIMBING ON LADDER ON BACK OF PRILL TRUCK WHEN HIS RIGHT ELBOW POPPED.

EE WAS CLIMBING ON A LOADER TO CLEAN THE WINDSHIELD. HIS FOOT SLIPPED AND HE FELL. HE CAUGHT THEMIRROR BRACKET WITH HIS RT.HAND TO STOP HIS FALL.

EE STRAINED HIS BACK WHILE LIFTING A WELDER TRAILER TONGUE.

EE EXPERIENCED PAIN IN HIS STOMACH & GROIN WHILE PULLING ON A ROPE.

EE SUFFERED A WELDING BURN TO HIS RIGHT EYE.

EE WAS USING A HAMMER AND SCREWDRIVER TO ALIGN HOLES IN CONCRETE FORMS. HE STRUCK HIS LT. INDEXFINGER WITH THE HAMMER.

EMPLOYEE WAS WORKING WITH ANOTHER EE TO INSTALL A STEEL PLATE IN THE PLANT. WHILE LIFTING THE PLATE, HE FELT A SHARP PAIN. A COUPLE OF WEEKD LATER HE WAS STILL HURTING AND WENT TO THE DOCTOR. THE DOCTOR REPORTED THAT HE HAD A HERNIA. HE HADSURGERY 5-20-02 AND HAS BEEN OFF FROM WORK SINCE.

EE WAS USING A BOX BLADE TO CUT A HOLE IN A CONVEYOR BELT. THE BLADE BROKE CAUSING HIS HAND TO SLIP. HE CUT HIS LEFT ARM ON THE BROKEN BLADE.

EE WAS SQUATTED DOWN ON A BOARD USING A HOSE TO WASH UNDER A CONCRETE SLAB. WHEN HE STOOD UP. HE SLIPPED ON THE BOARD AND FELL TO THE GROUND.

EE WAS USING A CUT-OFF SAW TO CUT REBAR. PART OFTHE BLADE BROKE OFF AND CUT HIS RIGHT THUMB. SUTURES WERE REQUIRED.

EMPLOYEE WAS OPENING FREIGHT TRAILER DOORS. ONE OF THE LATCH HANDLES SPRANG UP AND STRUCK HIM INTHE MOUTH.

EE WAS HELPING TO BUILD 8" X 20" SCREEN AND STRAINED BACK WHILE LIFTING PIPE BRACES. EE DID NOT REPORT UNTIL 11-15-00.

HE WAS USING A HAMMER AS A CROWBAR WHILING FLEXCO ON THE QR2 CONVEYOR. THE HAMMER SLIPPED AND CUT HIS FINGER ON A FLEXCO.

EMPLOYEE WAS LEAVING THE PLANT AT THE END OF HIS SHIFT. HE STRUCK EMPLOYEE'S PERSONAL VEHICLE AS DAMAGED AND HE RECEIVED CUTS AND ABRASIONS.

EMPLOYEE WAS CUTTING DOWN SCREENING BIN, HE CHAINED THE BEAM TO THE MAN BASKET. HIS RIGHT HAND WAS SMASHED BETWEEN THE BASKET AND THE BEAM.

HE WAS INSTALLING SPIDER BOLTS. WHILE INSTALLING THE SECOND BOLT, THE FIRST BOLT SLIPPED IN POSITION, PINCHING HIS FINGER BETWEEN THE BOLT HEAD AND THE SPIDER. HIS MIDDLE AND RING FINGERS ON H IS RIGHT HAND WERE CRUSHED. STITCHES WERE REQUIRED AND 1/4" WAS REMOVED FROM THE END OF THE MIDDLE FINGER.

EE TRIPPED & FELL WHILE WALKING TO SCALE HOUSE

HE PULLED A MUSCLE IN HIS BACK WHEN HE PICKED UP A SCOTCH BLOCK.

HE WAS OPERATING A QUARRY TRUCK IN THE QUARRY WHEN THE TRUCK HIT A BUMP IN THE ROAD. THE SEAT IN THE TRUCK HURT HIS BACK.

HE SLIPPED WHILE CARRYING A SCREEN CLOTH UP THE STAIRS. HE STRAINED LEFT SHOULDER AND NECK.

HE WAS CUTTING A CONVEYOR BELT WITH A KNIFE. HIS HAND SLIPPED DOWN THE HANDLE OF THE KNIFE ONTO THE BLADE, CUTTING HIS LITTLE FINGER ON HIS RIGHYT HAND. THERE WAS NO LOST TIME, BUT STITCHES WE RE REQUIRED.

EE WAS HELPING INSTALL TAILGATE ON 773 CATERPILLAR TRUCK. HE WAS STANDING ON A PORTABLE WORK PLATFORM, USING A PRY BAR TO MOVE THE TAILGATE INTO POSITION. THE PRY BAR SLIPPED, HE LOST FOOTING AND FELL DOWN STAIRWAY OF WORK PLATFORM.

WHILE PULLING TARP OVER LOAD, DRIVER CLIMBED ONSIDE OF TRUCK, SLIPPED AND FELL CAUSING STRAIN TO BACK AND RIGHT WRIST.

HE WAS CLIMBING A LADDER TO GET TO CAB OF THE WATER TRUCK. HE LOST HIS BALANCE AND FELL BACKWARDS, LANDING ON HIS HEELS.

EMPLOYEE WAS HELPING CHANGE Z-BAR ON CATERPILLAR 980C LOADER. THE Z-BAR FELL, CATCHING MIDDLE FINGER ON LEFT HAND AGAINST FRAME.

EE WAS HELPING REPLACE A V-BELT ON SINGLE IMPACTOR CRUSHER. HIS LEFT THUMB WAS CAUGHT BETWEEN SHEAVE & V-BELT. THERE WAS NO LOST TIME, BUT 3 STITCHES WERE REQUIRED

HE STRAINED HIS BACK WHILE OPERATING THE TERMINATOR ROCK BREAKER.

HE STRAINED HIS BACK WHEN HE LIFTED THE BRAKE SHOES FOR A TEREX 3307 TRUCK.

EMPLOYEE WAS HOOKING SLING TO A LOADER BUCKET. THE LOADER MOVED FORWARD, MOVING THE PIPE THE EMPLOYEE WAS STANDING ON AND CAUSING HIM TO FALL TO THE GROUND.

EE STRAINED HIS BACK WHILE INSTALLING FRONT DIFFERENTIAL ON CATERPILLAR 992C LOADER.

HE WAS CLEANING BOWL FOR 7' CONE CRUSHSER WITH GRINDER AND WIRE BRUSH. A RUST PARTICLE GOT INTO HIS LEFT EYE.

HE SLIPPED WHILE STEPPING FROM A CONVEYOR TO A TAIL PULLEY GUARD. HE HIT HIS RIGHT KNEE ON THE SKIRTBOARD.

EE WAS HELPING CHANGE SCREENS ON 8X20 SCREEN. HE STRAINED HIS BACK WHILE LIFTING A SCREEN CLOTH.

HE WAS CUTTING STEEL AND WEARING SAFETY GOGGLES WHEN A PIECE OF SLAG FLEW INTO HIS EYE.

HE WAS CLIMBING THE SLOPE GOING TO THE #1 PLANT FEEDER HOUSE. HE SLIPPED ON THE LOOSE MATERIAL AND CUT HIS STOMACH ON A PIECE OF SCRAP ANGLE IRON.

EMPLOYEE WAS ESSEMBLING THE DREDGE PUMP WHEN THE HOUSING SLIPPED AND MASHED HIS LEFT RING FINGER.

EE STRAINED HIS BACK WHILE OPERATING BACKHOE MACHINE.

EE WAS INSTALLING HYDRAULIC LINES UNDER THE CATWALK AT JAW CRUSHER PLANT 1. HE STRAINED HIS LOWER BACK AND HIP.

EE WAS CLIMBING STAIRS TO FEEDER HOUSE. HE TRIPPED ON THE STEPS AND HIT HIS RIGHT KNEE ON THE TOP STEP.

EMPLOYEES WEE STANDING IN FRONT OF TWO OPEN ELECTRICLA DISCONNECT ENCLOSURE WHEN A FAULT RESULTED IN A FLASH FIRE.

HE WAS REPLACING FUSES IN@3 CONVEYOR FUSE BOX. WHEN HE PUT THE LAST FSE IN, IT FLASHEDAND BURNED HIS RIGHT HAND. ELECTRICAL DISOCNNECT SWITCH HANDLE WAS INT EH OFF POSITION, BUT THE DISCONNE CT WAS NOT OFF.

EMPLOYEES WERE STANDING IN FRONT OF TWO OPEN ELECRICAL DISCONNECT ENCLOSURE WHEN A FAULT RESULTED IN A FLASH FIRE.

WHILE HELPNG TO CHANGE OUT A DRILL BIT, EE HAD HIS HAND ON THE WRENCH, AND MOVEMENT OF THE CYLNDER TO BREAK THE BIT FREE, PINMCHED HIS FINGER BETWEEN THE MAST AND THE WRENCH. EE REQUIRED STITC HES IN HIS FINGER.

HE WAS SHOVELING OFF THE PLATFORM ON THE CONE CRUSHER. HIS LEFT ARM HIT A CLOSE CLAMP, CUTTING HIS ARM.

EMPLOYEE WAS REMOV8ING THE SHEAVE FROM THE VIBRATING GRIZZLY AT THE #1 PLANT. IT CAME OFF AND CAUGHT HIS RIGHT RING FINGER BETWEEN THE SHEAVE AND THE SHAFT.

EMPLOYEE WAS CLEANING THE ROCK BOX OER THE 4X12 CEDAR SCREENS AT THE #1 PLANT. HE WAS STANDING ON THE SCREEN FRAME WHEN HE STEPPED DOWN TO THE CATWALK, HE TWISTED HIS RIGHT ANKLE.

KNOCKED ROCK LOOSE FROM LEDGE AND STRUCK EE ON TOP OF HARD HAT WHILE TRYING TO INSERT 15 FT WATERLINE INTO FITTING.

EE WAS ATTEMPTING TO REMOVE A ROCK THAT WAS LODGED IN THE CHUT GOING INTO THE J1 CONVEYOR. THE ROCK FELL, SMASHING HIS LEFT HAND BETWEEN THE ROCK AND THE CONVEYOR BELT.

HE WAS HELPING TO REMOVE AN ELECTRIC MOTOR FROM A VIBRATING SCREEN. THE MOTOR WAS BEING LIFTED BYU A CRANE. THE MOTOR HUNG UP & SUDDENLY CAME LOOSE, STRIKING THE EMPLOYEE & KNOCKING HIM TO THE GROUND. HE DID NOT BEGIN TO LOSE TIME UNTIL 24 JAN 1995.

HE WAS HELPING TO MOVE A LARGE DESK FOR CLEANING. HERNIA. EMPLOYEE DID NOT BEGIN TO LOSE TIME UNTIL 5 OCTOBER 1993.

EMPLOYEE WAS DRIVING A 773 CATERPILLAR TRUCK IN THE QUARRY. THE TRUCK HIT A LOW SPOT AND EMPLOYEE PULLED A MUSCLE IN HIS BACK.

THE EMPLOYEE WAS CHECKING ANTIFREEZE IN RADIATOR OF A CAT 992 LOADER. THREADS WERE STRIPPED ON RADIATOR CAP. CAP CAME OFF AND BLEW ANTIFREEZE ONTO EMPLOYEE. SOME WENT INTO HIS MOUTH.

EMPLOYEE WAS CLIMBING FROM TOP OF SINGLE IMPACTOR CRUSHER TO THE CONVEYOR. HE FELL AND LANDED ON CATWALK AROUND SINGLE IMPACTOR.

EMPLOYEE WAS USING A POCKET KNIFE TO CUT A NYLONE STRAP HE WAS USING HIS RT HAND TO PUSH THE KNIFE THE KNIFE SLIPPED & THE KNIFE STUCK IN HIS LEFT HAND BETWEEN THE INDEX FINGER & THUMB

WALKED UNDER CONVEYOR HIT HEAD ON CONVEYOR FELL BACKWARDS INTO FRAME OF SHAKER.

WALKED UNDER CONVEYOR, HIT HEAD ON CONVEYOR, FELL BACKWARDS INTO FRAME OF SHAKER.

EMPLOYEE WAS TAKING AN OIL SAMPLE FROM A R-35 EUCLID TRUCK. AFTER GETTING THE SAMPLE, HE STEPPED OFF OF THE TRUCK AND STEPPED INTO A HOLE, TWISTING HIS RIGHT ANKLE.

EMPL WAS TAKING OIL SAMPLE FROM R 35 EUCLID TRUCK. AFTER GETTING SAMPLE HE STEPPED OFF OF TRUCK & STEPPED INTO HOLE TWISTING RIGHT ANKLE.

EMPLOYEE WAS SHOVELING SPILLED ROCK FROM INSIDE THE TUNNEL AT THE LARGE SURGE PILE AND PULLED THE MUSCLES IN HIS BACK.

STANDING ON A GUARD WHILE REPAIRING A WATER LINE- LOST FOOTING WHILE STEPPING DOWN- STRUCK KNEES ON CATWALK.

EMPLOYEE WAS CHANGING FUSES IN ELECTRICAL FUSE BOX THAT RAN THE AIR COMPRESSOR.HE WAS DOING THIS WITHOUT USING PROPER TOOLS AND THE FUSE CONNECTORS ARCHED AND BURNED HIS RIGHT HAND.

OPER CAT LOADER HOIST PUMP LINE STARTED LEAKING SPAYING OIL, IT CAUGHT ON FIRE, BURNS ON HANDS ARMS EARS AND FACE

EMPLOYEE USING 2IN WRENCH AS A CHEATER ON SMALLER WRENCH WRENCH SLIPPED & STRUCK EMPLOYEE IN THE FACE

EMPLOYEE WAS HELPING MOVE CONCRETE BLOCKS. EMPLOYEE WAS HOOKING CHAIN, ATTACHED TO LOADER BUCKET,TO CONCRETE BLOCK. HIS HAND WAS CAUGHT BETWEEN CHAIN AND BLOCK WHEN THE BUCKET WAS RAISED.

HELPING CHANGE SCREENS STEPPED BACK OFF A STOP WHILE MOVING A PICE OF SCREEN CLOTH FELT PAIN IN LOWER ABCK ABOVE RIGHT HIP.

EMPLOYEE WAS USING 6' PIECE OF DRILL STEM TO CLEAR ROCK FROM HOPPER. STEM DEFLECTED OFF ROCK AND CAUGHT RING FINGER BETWEEN STEM AND HYDRAULIC LOCK ON CONE.

EMPLOYEE WAS RU3NING ACROSS PARKING AREA AND RAN INTO A 2'X2'X4' CONCRETE BLOCK.

EMP WAS HELPING3ROLL A 2 IN PLASTIC PIPE. THE PIPE BROKE IN A COIL AND LOOSE END STRUCK EMP IN LEFT EYE

EMPLOYEE WAS CU7TING A PIECE OF IRON WITH CUTTING TORCH. ANGLE IRON WAS IN STRESS AND WHEN CUT, FLEW UP AND STRUCK EMPLOYEE IN THE FACE.

TURNING A BARRE5 OF OIL ON THE FORKS OF A FORKLIFT SO HE COULD INSTALL A SPIGOT.AS HE DID,SHARP PAIN STARTED IN STOMACH AND WENT TO GROIN.

EMPLOYEE WAS RE4OVING ROCKS FROM THE FEED BOX ABOVE 7' CONE CRUSHER WHEN A BIG ROCK ROLLED ONTO HIS LITTLE FINGER.THE EMPLOYEE RECEIVED A FRACTURE ON THE TIP OF HIS LITTLE FINGER ON HIS RIGHT HAND.HE ALSO RE7EIVED A CUT ON THIS FINHER AND HIS FINGERNAIL WAS TORN LOOSE AND REMOVED BY THE DOCTOR.

LOADING X-TIE O3TO TRAILER WHEN IT CAUGHT ON RR SPIKE.

OTHER EMPLOYEES3WERE THROWING SCREENS OFF THE CATWALK THE INJURED EMPLOYEE WALKED UNDER THEM AND WAS HIT BY A FALLING SCREEN

EMPL SEPARATING3SCREEN CLOTH FROM SCRAP METAL.AS HE WAS PULLING PIECE OF SCREEN OUT FROM UNDER SCRAP METAL HE STRAINED HIS BACK.

EMP WAS LIFINT 7HANNEL IRON AND ANGLE IRON AND STRAINED LEFT GROIN AREA CAUSING HERNIA

EMPLOYEE WAS ST5RTING EQUIPMENT FOR BEGINNING OF SHIFT. HE HAD STARTED A 992 CAT LOADER AND WAS CLIMBING DOWN OFF THE LOADER WHEN HE SLIPPED AND TWISTED HIS RIGHT KNEE.

EMP WAS WELDING3ON THE FEEDER HOPPER AT THE #2 PLANT HE WAS ATTEMPTING TO LINE UP A CROSS BRACE BEAM ON THE BACK OF THE FEEDER HOPPER BY PUSHING IT WITH HIS FEET AND IN DOING SO STRINED HIS BACK 3

EMP WAS DISLODG3NG A ROCK FROM THE GRIZZLY ON HIS RIGHT SIDE WHEN ANOTHER LARGE ROCK ROLLED ONTO HIS LEFT FOOT AND BRUISED IT

EMPL STANDING ON TOP OF CONVEYOR FRAME PULLING SHORT PIECE OF CONVEYOR BELT OVER ROLLERS UNDER SKIRTBOARDS.EMPL SLIPPED AND STRUCK TAIL BONE AGAINST IDLER ROLLERS.

DRIVER WAS BACK3NG QUARRY TRUCK TO UNLOAD AT A STOCKPILE WHEN THE EDGE CAVED IN AND THE TRUCK FELL INTO THE PILE BACKWARDS. DRIVER FRACTURED HIS LEFT SHOULDER.

EMPLOYEE SLIPPED ON ICY LOADER STEP AND FELL.

AN OIL STAND WAS SITTING ON A CONCRETE BLOCK THE LOADER OPERATOR STOOD ON TOP OF THE BLOCK TO RECORD HIS OIL USAGE HE SLIPPED FROM THE BLOCK AND SPRAINED HIS LEFT ANKLE

EMPLOYEE WAS DRIVING A STOCKPILE TRUCK WHEN IT STRUCK A PILE OF ROCKS.THE MOTION OF THE TRUCKS DRIVING OVER THE ROCKS THREW THE DRIVING UP INTO THE CEILING OF THE CAB OF HIS TRUCK.

EMP WAS SHOVELING ROCK OFF THE 7 FT CONE CRUSHER AND STRAINED THE MUSCLES IN HIS LOWER BACK

EMPLOYEE WAS HOLDING A GEAR THAT WAS BEING DRIVEN ON A SHAFT. A SLEDGE HAMMER AND A 4"X4" WOOD BLOCK WERE BEING USED TO DRIVE IT ON. THE EMPLOYEE THAT WAS USING THE HAMMER HIT THE WOOD BLOCK A GLANCING BLOW AND HIT THE LEFT HAND OF THE EMPLOYEE HOLDING THE GEAR. THE HAMMER HIT THIS LEFT MIDDLE FINGER AND LEFT RING FINGER AND MASHED BOTH.

EMPLOYEE WAS HELPING ROLL V BELTS AND TURN THE WOBBLER FEEDER TO ALIGN THE SPROCKETS HIS LITTLE FINGER ON HIS RIGHT HAND WAS CAUGHT BETWEEN THE SHEAVE AND V-BELTS THE END OF THE LITTLE FINGER WAS CUT AND REQURIED TWO STITCHES