Mining Incidents

Auger #1: 2 MSHA citations Coal

S & S Auger Mining · Surface
Controlled by Craig W Scarry
Port Washington, Tuscarawas County, OH  ·  Abandoned
MSHA Mine ID: 3304081

Auger #1 has $110 in proposed MSHA penalties and $0 outstanding across 0 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at Auger #1.

Fatalities
0
Total incidents
1
Years on record
1994
Latest incident
Mar 1994
Compliance record
MSHA citations since 2001
2
citations
0
significant & substantial
$110
proposed penalties
$110
paid to date
100% of proposed penalties paid to date, a $0 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2000
11
inspections on record
148
inspection hours
n/a
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 148 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.

Auger #1 has $110 in proposed MSHA penalties and $0 outstanding across 0 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$110
proposed penalties
$110
current assessed
$110
paid to date
$0
outstanding
2 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2003-04-08.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
0.0%
significant & substantial
0.0%
high negligence or reckless
0.0%
reasonably likely or greater
0.0%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 100.0% low, 0.0% moderate, 0.0% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.

MSHA sampling at Auger #1 shows 100% of 11 respirable coal dust samples met the 1.5 mg/m3 standard.

Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Respirable coal dust
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.

Last sampled: 2004-02-10, 22 years ago
100%
within 1.5 mg/m3
11
samples
0.17
dust max (mg/m3)
11 samples taken by MSHA inspectors, 0 by the operator.
Most-sampled occupations
  • AUGER OPERATOR6
  • AUGER HELPER4
  • LABORER/BLACKSMITH1

Noise
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.

Last sampled: 2003-06-30, 23 years ago
67%
over PEL
3
samples
Most-sampled occupations
  • AUGER OPERATOR2
  • LABORER/BLACKSMITH1
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.
Health sampling trend
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.
Respirable coal dust by year
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.
Year within 1.5 mg/m3 samples
2004 100% 1
2003 100% 3
2002 100% 2
2001 100% 4
2000 100% 1
Noise by year
Year over PEL samples
2003 0% 1
2000 100% 2
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.
Ownership history
  1. S & S Auger Mining 1987 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Coal production is reported quarterly and lags the current period; the most recent quarters may be incomplete.
Year Employees Coal produced (tons)
2002 2 3,734
2001 3 1,209
Source: MSHA quarterly employment and production, updated weekly.

Auger #1 sits in Tuscarawas County, Ohio, where the Census mining category is 1.3% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Tuscarawas County, Ohio · Population 92,585
1.3%
Mining share of county employment
$64,494
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2002 Q4 94 0 0 0.0
2001 Q1 120 0 0 0.0
No fatalities recorded at this mine.

Reportable incidents

1 on file

1994 · 1 incident

March 14, 1994 OH · Coal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman POWERED HAULAGE
S & S Auger Mining · Struck by falling object

HE WAS PICKING DIRT OFF CONVEYOR. HE DROPED A CHUNK ON HIS INDEX FINGER. THE LOSS OF HIS FIRST JOINT ON RIGHT INDEX FINGER.