Mining Incidents
Search Operators Mines Alerts Research Controllers Fatalgrams About
English Español
← Back to search

BADGER MINE AND MILL: 60 MSHA citations Metal/Non-Metal

Controlled by Haydon Holdings LLC
Campbellsville, Taylor County, KY  ·  Abandoned
MSHA Mine ID: 1500074

BADGER MINE AND MILL has $6K in proposed MSHA penalties and $0 outstanding across 0 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at BADGER MINE AND MILL.

Fatalities
0
Total incidents
6
Years on record
1987–2002
Latest incident
Feb 2002
Compliance record
MSHA citations since 2001
60
citations
29
significant & substantial
$6,418
proposed penalties
$6,418
paid to date
100% of proposed penalties paid to date, a $0 gap.
Source: MSHA violations data, updated weekly.
See Nally & Haydon Surfacing, LLC's full MSHA compliance history →
Inspection activity
MSHA inspections since 2000
31
inspections on record
429
inspection hours
n/a
citations per 100 inspection hours
ⓘ This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 429 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.

BADGER MINE AND MILL has $6K in proposed MSHA penalties and $0 outstanding across 0 contested dockets.

Penalty disposition
ⓘ Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$6K
proposed penalties
$6K
current assessed
$6K
paid to date
$0
outstanding
60 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2009-08-13.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
ⓘ Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
48.3%
significant & substantial
5.0%
high negligence or reckless
48.3%
reasonably likely or greater
45.0%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 1.7% low, 93.3% moderate, 5.0% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
Health sampling
ⓘ A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
ⓘ Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2004-06-15, 22 years ago
0%
of limit-tested samples over the exposure limit
6
samples
6
limit-tested
Most sampled contaminants
  • Nuisance dust, respirable, <1% Qtz3
  • Quartz, respirable, >1% Qtz3
Show the individual readings (6)
Date Contaminant Concentration Limit Conc / limit Occupation
2004-06-15 Nuisance dust, respirable, <1% Qtz 0.21 10 0.02 Dry Screen Plant Operator
2004-06-15 Quartz, respirable, >1% Qtz 0.52 2.09 0.25 Front-end Loader Operator
2001-09-19 Quartz, respirable, >1% Qtz 0.21 0.94 0.22 Dry Screen Plant Operator
2001-09-19 Quartz, respirable, >1% Qtz 0.24 0.83 0.29 Front-end Loader Operator
2001-09-19 Nuisance dust, respirable, <1% Qtz 0.2 10 0.02 Dry Screen Plant Operator
2001-09-19 Nuisance dust, respirable, <1% Qtz 1.31 10 0.13 Crusher Oper/Worker
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.

BADGER MINE AND MILL recorded 0.00 reportable injury cases per 100 full-time workers in 2004.

Injury rate, 2004
ⓘ This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
Below average. The US metal and nonmetal mining average was 3.73 and the all-US-mining average was 4.33 cases per 100 workers.
In Kentucky, metal and nonmetal mining averaged 3.35 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2004 * 0.00 0.00 0.000
2001 * 9.02 0.00 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
  1. Nally & Gibson Quarries, Inc 1950 to 2007
  2. Nally & Haydon Surfacing, LLC 2007 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year Employees
2009 1
2008 5
2007 3
2006 2
2005 4
2004 9
2003 6
2002 2
2001 9
2000 4
Source: MSHA quarterly employment and production, updated weekly.

BADGER MINE AND MILL sits in Taylor County, Kentucky, where the Census mining category is 1.3% of county employment.

Local economic context
ⓘ County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Taylor County, Kentucky · Population 26,205
1.3%
Mining share of county employment
$61,871
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
ⓘ Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2009 Q3 176 1 1 5681.8
2009 Q2 0 0 0
2009 Q1 0 0 0
2008 Q4 559 0 0 0.0
2008 Q3 682 2 0 2932.6
2008 Q2 1,601 0 0 0.0
2008 Q1 1,850 3 2 1621.6
2007 Q4 1,028 0 0 0.0
Show 31 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2007 Q3 0 0 0
2007 Q2 548 0 0 0.0
2007 Q1 2,008 11 8 5478.1
2006 Q4 630 1 0 1587.3
2006 Q3 606 0 0 0.0
2006 Q2 729 6 4 8230.5
2006 Q1 928 0 0 0.0
2005 Q4 1,174 0 0 0.0
2005 Q3 1,228 4 1 3257.3
2005 Q2 1,047 2 0 1910.2
2005 Q1 3,824 0 0 0.0
2004 Q4 4,840 0 0 0.0
2004 Q3 5,462 0 0 0.0
2004 Q2 6,777 6 3 885.3
2004 Q1 4,332 1 0 230.8
2003 Q4 5,895 0 0 0.0
2003 Q3 2,812 0 0 0.0
2003 Q2 680 0 0 0.0
2003 Q1 641 1 0 1560.1
2002 Q4 651 0 0 0.0
2002 Q3 647 0 0 0.0
2002 Q2 653 0 0 0.0
2002 Q1 2,095 0 0 0.0
2001 Q4 7,138 2 0 280.2
2001 Q3 7,166 6 2 837.3
2001 Q2 3,678 0 0 0.0
2001 Q1 4,197 0 0 0.0
2000 Q4 2,192 0 0 0.0
2000 Q3 1,264 0 0 0.0
2000 Q2 2,663 0 0 0.0
2000 Q1 1,143 0 0 0.0
No fatalities recorded at this mine.

Reportable incidents

6 on file

2002 · 1 incident

2001 · 1 incident

December 27, 2001 KY · Metal/Non-Metal mine manager, mine foreman, mine owner HANDTOOLS (NONPOWERED)
Nally & Gibson Quarries, Inc · Caught in, under or between a moving and a stationary object

HE WAS DISASSEMBLING THE CONVEYOR USING A HAMMER& PUNCH WHEN THE PIN CAME LOOSE. THE CONVEYOR SHIFTED & CAUGHT HIS LEFT INDEX FINGER BETWEEN THEPUNCH & CATWALK.

1995 · 1 incident

May 3, 1995 KY · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator HANDTOOLS (NONPOWERED)
Nally & Gibson Quarries, Inc · Struck by... (Not Elsewhere Classified)

HE WAS USING HIS POCKET KNIFE TO SCRAPE ALIMITE FITTINGS ON THE LOADER SO HE COULD GREASE IT. THE KNIFE SLIPPED AND CUT HIS RIGHT THIGH.

1993 · 1 incident

February 8, 1993 KY · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator EXPLODING VESSELS UNDER PRESSURE
Nally & Gibson Quarries, Inc · Struck by flying object

HE WAS RUNNING THE LOADER STOPPED TO CHECK THE TIRES ONE HAD A KNOT ON IT WHEN HE BENT TO EXAMINE KNOT IT BLEW KNOCKED HIM BACKWARDS HE COMPLAINED WITH HIS EYES & A HEADACHE

1987 · 2 incidents

July 3, 1987 KY · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDLING OF MATERIALS
Nally & Gibson Quarries, Inc · Caught in, under or between (Not Elsewhere Classified)

HE WAS WORKING 7ON THE BOBCAT WHEN HIS RING FINGER ON THE RIGHT HAND GOT CAUGHT CUTTING THE FINGER.

June 30, 1987 KY · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman SLIP OR FALL OF PERSON
Nally & Gibson Quarries, Inc · Fall from machine

HE WAS STEPPING3FROM THE LOADER TO THE EUCLID WHEN HE SLIPPED AND FELL HITTING HIS BACK ON THE LOADER LADDER AND HIS FOREHEAD ON A ROCK CAUSING BRUISED RIBS AND 14 STITCHES TO THE FOREHEAD.